Tag Archives: torque motor

China Good quality Overload Limiter Wtz-A100n Overload Protection Safety Devices for Overhead Crane torque limiter electric motor

Product Description

WTZ A100N Overload limiter can be in the form of Chinese characters, graphics, characters and so on comprehensive display the various parameters in the process of work.
As the main hook load, vice hook load, work boom Angle, length of boom, radius, etc.;

○Overload Limiter Alarm function
Have sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system.
When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing.

○ Overload Limiter protection function
Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security.

Load Moment Indicator(safe load indicator or Crane computer) is a device which is installed on various sorts of cranes like mobile, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the lift is exceeding the safe operating range. In some cases, the device will physically lock out the machinery in circumstances it determines to be unsafe.

It controls the lifting equipment to function as per the manufacturer’s suggested safe load charts. Each of the measured parameters like load weight, working radius, control limit,angle and extension of the crane boom, etc will then further be displayed in the operator’s cabin.

WTZ-A100N Overload Limiter ( LMI ) System

Technical Parameters

Product Name	overhead cranes WTZ A100n crane safety spare parts over load limiters with data logger
Material	Stainless steel
Color	as the picture
Sealed IP	IP68
Name	WTZ-A100N
Brand	CZPT
Certifiction	ISO 9001,CE, CCS, ATPK
Used Filed	cranes safety protection filed

DATA LOGGER

Data USB downloadable: built-in USB interface, can support operating data download, can review the historical data from any time period. Through the analysis of the record, the complete status of site operation can be restored. Ultra-large Capacity: the device can support actual load data 50,000 circular logging, higher capacity than the standard 16000 record.

Data Record Image

Installation Cases

Certifications

Company Profile

Weite Technologies Co.,Ltd

Founded in 2002, it is national hi-tech enterprise located in HangZhou, China. It has been focusing on R&D and OEM manufacturing of lifting safety protection devices such as Load Moment Indicator, Safe monitoring systems, overload limiter, Load cell, Anemometers etc.We continuously concentrate on ensuring lifting equipments run safely as long-term pursuing goal.

“The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong, Asiagroup, Big Crane and Fortune 500 corps” . Nowadays, WTAU products are widely used in marine industry,electrical, chemical, steel, metallurgy, construction, ports and other industries, and have been wide spreaded to over 70 countries and regions.

Global Partners

FAQ

1) Is your company well-reputated? How to prove that?

It is a China Top 3 brand focusing on Crane Safety Protection Equipment. We are also Safety Partners for Global Top 100 Crane Owning Companies like Tat Hong(top 9), Asiagroup(top 45), Big Crane(top 94) and Top 500 companies such as ABB, Macgragor,TTS,CNOOC,etc. Products are been sold to over 70 countries and regions globally.

2) How to assure the quality?

The Product Warranty for the total item is 12 months. Any problem after installation, we will change the new 1 for free.

3) How to install the LMI?

English User Manual(include all the details of each item) will be offered for installation and trouble shooting. Also free Remote Instant Technical assistance would be offered by our english engineers. Or we can send our engineers to assist you locally.

4) How much is your LMI system?

Send me the crane model, hook number, working conditions(Luffing Tower Working Condition, Pilling) and special requirement and the like. Your contact info is a must.

5) How can I place order?
A: You can contact us by email about your order details, or place order on line.

6) How can I pay you?

A: After you confirm our PI, we will request you to pay. T/T and Paypal, Western Union are the most usual ways we are using.

After-sales Service:	Spare Parts
Warranty:	1 Year
Type:	Gantry Crane & Portal Crane

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

CZPT(R) Tolerance Ring For Limiter Torque

Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak. limiter torque

CZPT TL

TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive. limiter torque

IWIS FT series

FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.

TL-IT inline

TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.
China Good quality Overload Limiter Wtz-A100n Overload Protection Safety Devices for Overhead Crane torque limiter electric motor
editor by CX 2024-03-28

China OEM Pto Shaft with Friction Torque Limiter for Agriculture Machinery torque limiter electric motor

Product Description

PTO Shaft 05+FF3/4 for Agriculture Machinery

HangZhou CZPT International Trading Co.,Ltd is a modern enterprise specilizing in the development, production, sales and services of PTO shaft. We adhere to the principle of “Precise Driveline, Advocate Green”, using advanced technology and equipments to ensure all the technical standards of precise driveline. So that the transmission efficiency can be maxmized and every drop of resource of customers’ can be saved. Meanwhile, we have a customer-centric service system, providing a full range of pre-sale, sale and after-sale service. Customer satisfaction is our forever pursuit.

We follow the principle of people first, trying our best to set up a pleasant surroundings and platform of performance for each employee, so everyone can be self-consciously active to join in “Precise Driveline, Adocate Green” to embody the self-worth, enterprise value and social value.

Newnuro’s goal is: reducing customer’s purchase budget, support customers to earn more market.
Newnuro always finds solution for customers.Customer satisfaction is our ultimate goal and forever pursuit.

Material:	Alloy Steel
Load:	Drive Shaft
Stiffness & Flexibility:	Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy:	IT6-IT9
Axis Shape:	Straight Shaft
Shaft Shape:	Assembled

Samples:	US$ 5/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

limiter torque

Choosing the Right Limiter Torque

Choosing the right limiter torque is crucial to your safety and that of your loved ones. There are many factors that go into selecting the right limiter, and you need to take them into consideration before making your final decision.

Mechanical

Using mechanical limiter torque is an ideal solution for protecting machinery and equipment from excessive torque. Overloads can lead to downtime and expensive repairs. This is because overloads occur when forces exceed the design limits of the mechanism.
Mechanical limiter torque is designed to limit the output of the drive to a predetermined value. This means that when the torque exceeds the specified value, the device will disengage from the driven device. This allows the system to coast to a stop.
Mechanical torque limiters are available in a wide range of sizes and can be used in virtually any application. They can be used in assembly lines, printing and converting machines, conveyors, industrial robots, and sheet metal processing equipment.
There are two main types of mechanical limiter torque: shear pin and ball detent. Shear pin torque limiters use metal pins to couple two rotating bodies. The drive pawl is held in place by a spring. Ball detent torque limiters use a series of balls to transmit torque. Both have evolved from simple slip-clutch designs.
Mechanical torque limiters are designed to provide a quick disengagement within milliseconds when torque overload conditions occur. They also provide a high level of accuracy and sensitivity. They can handle torque ranges of 40 to 24,000 in-lbs.
Mechanical limiter torque can be reset automatically or manually. Some of the newer devices utilize special springs with negative spring rates. This allows the device to re-engage more quickly and easily when an overload condition occurs. The spring rate also eliminates breathing and false trips.
The design of a mechanical torque limiter has evolved from a basic shear-pin or slip-clutch design. The new devices are more accurate and have less impact on the drive system. They also offer high sensitivity and a high level of safety.
There are also several types of mechanical overload devices. Some of these devices use a single screw to adjust the release torque. Others have a ratcheting mechanism. Some are even flexible couplings that allow for small angular misalignments and parallel offsets.
Choosing the right torque limiter is an easy way to protect machinery and equipment from overloads. With a range of designs to choose from, the right mechanical limiter can provide overload protection at an affordable price.

Electrical

Using an electrical limiter torque device is an ideal way to increase the reliability of electromechanical actuators, particularly when it comes to power transmission applications. These devices help dissipate rotational energy without causing damage to the driven device. They can be used in a wide variety of applications, including robotics and gear driving systems.
When selecting a torque limiter, it’s important to choose one that meets your application’s needs. There are many types of limiters on the market, and each has its own benefits.
The main advantage of an electronic limiter is that it can monitor and control torque overload. However, these devices are a bit cumbersome, and you will have to install many sensors and devices to make sure that the system is running properly.
Torque limiters are also useful in cases where the driven device cannot absorb the full output torque. For example, if the motor drives a bottle capping machine, the motor may not be able to fully absorb the torque, and the torque limiter must be used.
An electronic limiter torque device is not as effective as a mechanical one. In many cases, the motor controller may receive feedback from the shaft during an overload, but it will not immediately stop the over-torque part of the system.
Torque limiters are also important for protecting the drive train from overload. An electronic signal can shut down the over-torque part of the drive system, and a limit switch is often included in the package. This allows the drive train to be tested automatically for proper operation.
The most important feature of a torque limiter is its ability to separate the load from the drive. It can reduce the size of a drive train, as well as increase the efficiency of an electromechanical actuator.
In some cases, an electronic limiter is able to act like a fusing mechanism, automatically resetting itself when it detects an overload. However, a mechanical one is usually the better choice for most applications.
Torque limiters come in a wide range of sizes and styles. For example, there are ball detent type limiters, which may have compression adjustment or multiple detent positions. There are also synchronous magnetic, pawl and spring, and shear pin types. limiter torque

Disconnect types

Several types of disconnect torque limiters are available on the market. Some are electrical and require sensors to be installed, while others are mechanical and require no special devices.
Mechanical torque limiters are a cheaper option. They offer better protection than most electrical methods and are less prone to premature wear. They can be installed in a wide variety of applications. They can protect machinery with rotating components, including gearboxes, pulleys, conveyors and assembly lines.
Mechanical torque limiters can be either friction or magnetic. The friction type has spring loaded friction disks that slip against each other when the torque reaches a certain threshold. The magnetic type uses a magnetically susceptible material to create a magnetic particle clutch.
Both types of torque limiters are designed to protect machinery from mechanical overload. Choosing the right type will ensure protection at a reasonable price. Mechanical torque limiters offer a faster response time and better protection than electronic methods.
The friction type works like an automobile clutch. When the torque reaches a certain threshold, friction disks slip against each other to allow the torque to be transmitted. Mechanical friction limiters can be customized with a variety of outputs. They can also be adjusted manually. They are best suited for applications that experience a torque variance of less than 10%.
A torque limiter is used in industrial robots to prevent damage. They are also used in woodworking machines, printing and converting machines, and conveyors. They provide complete operational safety and offer long service life. Torque limiters are also used in assembly lines. They can prevent larger incidents by limiting damage from crash stops and jams.
Torque limiters come in a variety of designs, including pawl and spring, shear pin, and ball detent. The main difference between the types is how they disconnect.
Pawl and spring methods use springs to hold a drive pawl in place against the rotor. Shear pins are the most commonly used type of disconnect torque limiter. They are inexpensive to produce and reliable. However, they can be difficult to control accurately.
Ball detent type limiters use hardened balls or rollers in sockets that force the drive and driven elements apart when torque reaches a certain threshold. Ball detent limiters may need to be reset manually or automatically. limiter torque

Placement

Having a torque limiter on your machine can prevent damage to your components and your machine from overloading. They also protect the motor and the gearbox from jams. They reduce the torque required to move a conveyor or prime mover.
Torque limiters are found in all kinds of machine and processing equipment. They are especially useful in systems that require human interaction. They eliminate downtime caused by damaged components and eliminate the need for replacement parts. They are also ideal for applications that have a +/- 10% variance in torque.
Torque limiters typically include a spring-preload control element that uses special methods to limit the backlash that can occur between a drive element and a control element. Some systems also offer a random reset device that allows the operator to choose a new setting to reduce the risk of overload.
Another type of torque limiter is a friction type. This is a simple, low-cost method of overload protection. Unlike a shear pin, which requires lubrication, a friction type torque limiter operates much more accurately. When an overload occurs, the device breaks free before it hurts something. They are also more dependable than shear pins. The teeth on a friction torque limiter are aligned to mesh with each other and they are usually made of metal. They can also have bronze bushings for added strength.
Electromagnetic torque systems are similar to pneumatic torque systems, but they use electric current to energize a magnetic coil. They are also spring-set. This type of torque limiter is more reliable than a pneumatic one. It also has fast switching functions.
Torque limiters are usually found in industrial facilities, but they are also found in many commercial and consumer applications. Torque limiters can be used to couple gears, sprockets, motors, and even pumps. The size of the torque limiter will depend on the torque load and the machine cycle requirements. Some torque limiters are made to fit a single shaft, while others are made to couple several. Some types of torque limiters are made with a keyless locking mechanism to reduce the risk of backlash.
China OEM Pto Shaft with Friction Torque Limiter for Agriculture Machinery torque limiter electric motor
editor by CX 2023-11-21

China TSC Steel Ball Torque Limiter AQ Adjustable Ball Overload Motor Protector Safety Clutch Factory torque limiter design

Guarantee: 1 several years
Relevant Industries: Constructing Material Shops
Tailored help: OEM, STARS 2571 New Technological innovation Manufacturing facility 3Mpa 35 m3min Screw Diesel Motor substantial pressure Air Compressor thirty bar ODM, KALEN Wholesale 6mm Gold Silver Bracelet Necklace Cuban Control Url Flat Chain Necklace OBM
Structure: Jaw / Spider
Versatile or Rigid: Adaptable
Standard or Nonstandard: Normal
Material: Steel
Packaging Information: Generally we pack merchandise according to customers’ need. For reference: cartonbox, XLPM5.5AT power preserve mini cellular type low cost rotary screw air compressor with wheels plastic bag, New Style 18K Gold Plated Stainless Metal Jewellery Cuban Suppress Hyperlink Chain Colourful Beach Shell Bracelet Established wooden circumstance.
Port: ZheJiang

limiter torque

Different Types of Limiter Torque Offsets

Whether you are looking for an over or offset torque limiter, or you are simply looking for the correct torque measurement device to suit your needs, there are a number of different options available to you.

Over-torque limiters

Choosing the right torque limiters can help to protect your machine from damage. These devices are used in sheet metal and textile machinery, printing and converting machines, industrial robots, and conveyors.
Torque limiters are devices that protect equipment from damage caused by overloads. These devices are usually mechanical, but can also be electronic. Electronic overload protection monitors a variety of parameters, including rotational frequency, current, voltage, and pressure. They can also be programmed to monitor temperature.
The most common mechanical torque limiters are shear-pins and slip-clutches. These devices are usually installed in gears, shafts, motors, pumps, or servos. These devices disengage the drive line before an electronic device, preventing damage from accumulated rotational energy.
Torque limiters have also been used for years in marine applications. These devices are installed as close to the point of impact as possible.
Torque limiters have also been installed in servos and stepper motors. They are intended to eliminate mechanical overloads that can cause unplanned downtime. They also prevent damage from misuse or accidents.
Torque limiters are also used in conveyors and other assembly lines. These devices protect against over-torque situations, which can damage drive motors and drive components. These devices are used in woodworking machines, printing and converting machines, and industrial robots. They also provide an effective means of coupling gears and sprockets.
Torque limiters come in a variety of styles and models. To determine which device is right for your application, contact a manufacturer or a specialist. Choosing the right one can help to protect your machine from damage at an affordable cost.
Torque limiters are not designed to operate in a continuous slip environment. They should be selected based on the type of machine you are operating and the torque load you expect to generate. They should also be installed near the point of impact to avoid accidents.
The mechanical torque limiter is the most common type of slip clutch. It uses special springs with negative spring rates to avoid false trips. This design has been improved over the years from the simple slip-clutch.
The electronic overload protection is also an option, especially if you are using more advanced drive systems. It can monitor a variety of parameters, including rotational speed, rotational frequency, current, voltage, and position. limiter torque

Offset torque limiters

Using Limiter Torque Offsets can protect your machinery from overloads. These devices are designed to protect rotating parts. They can be used in a variety of ways. You can mount a pulley or a sprocket in a torque limiter. They can be installed in any machine shop.
Torque Limiters, also called slip clutches, are used to protect rotating components from overloads. They can also be used to protect machines from crashes. These devices use friction disks to transmit force from a driving shaft to a driven member. They can also be used with electronic sensors to protect rotating parts.
A torque limiter, or slip clutch, is a mechanical overload protection device that transmits torque from the driven shaft to the driven member through friction disks. Some torque limiters use friction plates. Others use backstop clutches that transmit torque in reverse. These devices can be used in many applications, including the construction industry, automotive industry, and manufacturing.
Torque Limiters work by disconnecting the drive shaft from the driven member during overloads. This ensures that the rotating components can operate without damage. Torque Limiters are available in a variety of styles and designs. Some limiters are spring-loaded. Some have compression adjustment, which allows them to be reset automatically.
Friction-disc torque limiters are a great option for applications that require constant running. They can be used in applications where a torque limiter may be part of a gearset assembly. They provide moderate adherence to a safe-torque setting. However, they may be susceptible to damage.
The torque limiter is typically the last gearset in the transmission. The drive sprocket must be sized based on the amount of torque that is needed to disengage the drive. A torque limiter can be mounted directly or via an adapter plate. It is important to center the drive sprocket over the bearing. This is done by machining the drive attachment.
Ball detent torque limiters can be used in single-position or multiple-position configurations. They can also be used in hub or hub/sprocket combinations. They can be manually reset, or can be set dynamically.
Using Limiter Torque Offsets is a quick and easy way to protect your equipment. Torque Limiters can be used with a wide range of applications, and you can easily adjust the size to suit your needs.

Ball detent torque limiters

Using a torque limiter protects equipment, such as sensitive machinery, from overloads. A torque limiter may be a mechanical device or an electronic device. Both types protect rotating machine components.
A mechanical torque limiter engages with the driven side of a machine through a small groove. A ball or roller is then inserted into the groove. The balls or rollers are then hardened to at least Rc 60. These components are then held in detents on the shaft. The balls and rollers slide out of the detents when the torque limiter experiences overload. The balls and rollers are then re-engaged when the overload is removed.
Some torque limiters use a snap-acting spring to release torque. Others use a pneumatic control system, which uses air pressure to force the ball detent device to disengage. Some systems also offer a random reset device.
Torque limiters are used in a variety of applications, including food and textile processing, packaging, and packaging and transportation. They are also commonly used in sewage treatment plants. They offer a wide variety of options, such as chain couplings, overload detector mechanisms, and various combinations.
A ball detent torque limiter provides a high level of accuracy. Its ability to automatically engage and disengage makes it a good option for applications where accuracy is important. Its design also provides the operator with a reliable torque limiter without needing manual intervention.
Torque limiters have many applications, including limiting transmission torque, protecting sensitive equipment, and controlling the torque of an axis. Some models can also be used in combination with electronic overload protection. Some models feature adjustable overload settings, which automatically disengage the torque limiter when the overload occurs. The torque limiter’s size and configuration should be determined based on the torques experienced by the axis. A torque limiter should also be designed to fully disengage the driven and driving components.
The two main types of torque limiters are mechanical and pneumatic. A pneumatic torque limiter will require a pneumatic control system, which utilizes air pressure to disengage the torque limiter in case of overload. A mechanical torque limiter will engage with the driven side of a machine through balls or rollers that are inserted into sockets on the pressure flange.

Measuring torque limiter output flange

Whether you are designing a new machine or repairing one, you need to know how to measure torque limiter output flange to ensure that your equipment is functioning properly. The torque limiter can help you protect your drive motors and gearboxes from costly damage. These devices are used in industrial robots, conveyors, woodworking machines, and printing and converting machines.
Torque limiters are light in weight and low in cost. They are also easy to install and maintain. When your machine is overloaded, the torque limiter acts as a clutch to disengage the input and output shafts. This reduces the potential for malfunction, and provides a higher level of reliability.
Torque limiters are available in two different types. The friction type uses spring loaded friction disks that slip when the torque exceeds a certain threshold. The other type uses permanent magnets mounted to each shaft. The magnetic torque limiter is a fast acting and effective way to limit torque.
Torque limiters also work with electronic sensors. During an overload condition, the torque limiter will disengage the input and output shafts within fractions of a second. This eliminates the possibility of a mechanism malfunction.
Torque limiters come in many shapes and sizes. The size of the body depends on the torque load and disengagement torque. The basic model features a flange for parallel shafts. However, more advanced models use pneumatic technology and use balls or rollers in sockets. This allows for a higher level of torque setting sensitivity.
Measuring torque limiter output flange requires that you measure the outside diameter of the sprocket. The inside diameter should match the centering diameter of the output flange. For a larger diameter, a tolerance of about half-inch is recommended. You should also check to ensure that the sprocket face is square. This is important for clearance.
Torque limiters are used in industrial robots, assembly lines, and sheet metal processing equipment. They can also be used in textile machinery. They are high in reliability and low in cost. This is why they are used so widely.
Torque limiters are also useful in preventing a situation where only one rudder surface operates. A torque limiter can also be used to prevent torque transmission through axial displacement. This prevents the drive shaft from spinning and causing damage to the test piece.
China TSC Steel Ball Torque Limiter AQ Adjustable Ball Overload Motor Protector Safety Clutch Factory torque limiter design
editor by Cx2023-07-13

China COUP-LINK CNC Machine Quality Shaft Flexible Zero backlash Aluminum Setscrew Jaw Spider Couplings For Encoder For servo motor torque limiter electric motor

Relevant Industries: Manufacturing Plant, Equipment Restore Stores, Other
Customized support: OEM, ODM
Framework: Jaw / Spider
Adaptable or Rigid: Adaptable
Common or Nonstandard: Standard
Material: Aluminium, Aluminum
Product name: Jaw/spider coupling
Brand: COUP-Hyperlink
Variety: Versatile jaw coupling setscrew
Area Treatment method: Anodizing
Certification: ISO9001:2008
Coloration: Silver
MOQ: 1pcs
Payment: T/T
Provider: Complex Assist
Packaging Information: regular carton or wood scenario in accordance to clients enquires.
Port: HangZhou

Coupling Versatile Coupling Sorts Of Motor Jaw/Spider Couplings LK8

Brand	Coup-hyperlink
Custom	Support

Merchandise Specifics Product Paramenters Certifications Company Profile About UsHangZhou Url Automation Gear Co., Ltd. is launched in 1998, found in its very own independent “Hyperlink Industrial Park”, a professional manufacturer of creating and producing of substantial-precision couplings, ball screw assistance models, 24 styles CZPT Rose Gold Silver 925 silver plated Copper Simple snake bracelet For Pan silver snake chain bracelet motor brackets and movement modules. Our coupling product strains include servo motor couplings, phase motor couplings, micro motor couplings, encoder couplings and so on. Positive aspects:- Innovative engineering – Personal Analysis & Growth heart- In-house processing & examination methods- ISO 9001:2015 certification- ROHSSo considerably, we have a lot more than thirty solution lines, which are broadly used in high-precision link and different automatic devices and equipments in the discipline of electronics, solar energy, photovoltaic sector, device tools, Wholesale Easter Present Christian Jewellery Spiritual Jesus Cross Ring Ornaments Guys Ladies Hand Jewelry Stainless Steel Cross Rings packaging, molding, health care, print and other industries. The merchandise have been approved and wided utilized by top-course consumers in Japan, Usa, Germany, Israel, Malaysia, Singapore, China ZheJiang globally. We also have brokers in Japan and Usa. Our Manufacturing unit FAQ 1.Q:How can we ensure good quality? A:Often a pre-production sample prior to mass production Often last Inspection before cargo Manufacturing unit mould plastic injection mold custom made digital enclosure plastic mould 2.Q: Can you make according to buyers design and style? A: Sure, we are specialist manufacturer OEM and ODM are equally welcomed. If you want far more decision or share your concepts with us, please kindly speak to us with out hesitation.3.Q:what solutions can we give? A:Accepted Shipping and delivery Terms: FOB,CIF,EXW,FCA,Categorical Delivery； Accepted Payment Forex:USD Acknowledged Payment Sort: T/T Language Spoken:English,Chinese4.Q:How is your value? A: Even though we have model-identify merchandise, Tiny gearbox Fishing boat Offshore vessel Large quality Ship 16A Gearbox Boat Gearbox HangZhou, China our rates are very favorable and competitive.Due to the fact of our very best price tag, customers from all more than the planet appear to acquire our products.5.Q:Can I request to advance the shipment? A: It must be is dependent on no matter whether there is ample inventory in our warehouse.6.Q: Why you pick us? A: We constantly think honesty and duty are basis of 1 business, so whatsoever goods we provide for you all are experienced. We will have products examined and offer COA just before shipping for sure.

limiter torque

Different Types of Limiter Torque Offsets

Over-torque limiters

Offset torque limiters

Ball detent torque limiters

Measuring torque limiter output flange

Whether you are designing a new machine or repairing one, you need to know how to measure torque limiter output flange to ensure that your equipment is functioning properly. The torque limiter can help you protect your drive motors and gearboxes from costly damage. These devices are used in industrial robots, conveyors, woodworking machines, and printing and converting machines.
Torque limiters are light in weight and low in cost. They are also easy to install and maintain. When your machine is overloaded, the torque limiter acts as a clutch to disengage the input and output shafts. This reduces the potential for malfunction, and provides a higher level of reliability.
Torque limiters are available in two different types. The friction type uses spring loaded friction disks that slip when the torque exceeds a certain threshold. The other type uses permanent magnets mounted to each shaft. The magnetic torque limiter is a fast acting and effective way to limit torque.
Torque limiters also work with electronic sensors. During an overload condition, the torque limiter will disengage the input and output shafts within fractions of a second. This eliminates the possibility of a mechanism malfunction.
Torque limiters come in many shapes and sizes. The size of the body depends on the torque load and disengagement torque. The basic model features a flange for parallel shafts. However, more advanced models use pneumatic technology and use balls or rollers in sockets. This allows for a higher level of torque setting sensitivity.
Measuring torque limiter output flange requires that you measure the outside diameter of the sprocket. The inside diameter should match the centering diameter of the output flange. For a larger diameter, a tolerance of about half-inch is recommended. You should also check to ensure that the sprocket face is square. This is important for clearance.
Torque limiters are used in industrial robots, assembly lines, and sheet metal processing equipment. They can also be used in textile machinery. They are high in reliability and low in cost. This is why they are used so widely.
Torque limiters are also useful in preventing a situation where only one rudder surface operates. A torque limiter can also be used to prevent torque transmission through axial displacement. This prevents the drive shaft from spinning and causing damage to the test piece.
China COUP-LINK CNC Machine Quality Shaft Flexible Zero backlash Aluminum Setscrew Jaw Spider Couplings For Encoder For servo motor torque limiter electric motor
editor by Cx2023-07-13

China TSC Steel Ball Torque Limiter AQ Adjustable Ball Overload Motor Protector Safety Clutch Factory torque limiter browning

Warranty: 1 many years
Applicable Industries: Constructing Substance Shops
Tailored assistance: OEM, STARS 2571 New Engineering Manufacturing facility 3Mpa 35 m3min Screw Diesel Engine large strain Air Compressor thirty bar ODM, KALEN Wholesale 6mm Gold Silver Bracelet Necklace Cuban Control Url Flat Chain Necklace OBM
Construction: Jaw / Spider
Flexible or Rigid: Versatile
Common or Nonstandard: Regular
Content: Steel
Packaging Details: Generally we pack merchandise according to customers’ prerequisite. For reference: cartonbox, XLPM5.5AT vitality help save mini mobile type cheap rotary screw air compressor with wheels plastic bag, New Style 18K Gold Plated Stainless Metal Jewellery Cuban Suppress Link Chain Colorful Beach front Shell Bracelet Set picket case.
Port: ZheJiang

limiter torque

What Is a Torque Limiter?

Whether you’re looking to add an extra bit of torque to your tool, or simply to keep the torque from getting out of hand, a limiter is a good tool to have on hand. There are a number of different limiters to choose from, including Ball detent limiters, Synchronous magnetic limiters, and Friction torque limiters.

Ball detent limiter

Typically, ball detent torque limiters use balls or rollers in sockets to control torque and force transmission through the load path. They are suitable for applications that require high precision and a fast response. They also minimize the possibility of damage caused by high-inertia loads. These torque limiters are often used on servo-driven axes. They are also suitable for packaging and woodworking.
A torque-limiting assembly consists of a gear, a cage, a series of balls, a spring, and breakout means. A cage is mounted between the input gear and a fixed backing plate. The cage rotates through half of the input gear’s axial angle. The cage holds the primary balls. When torque overload occurs, the primary balls roll out of their pockets and force the drive and driven elements to separate.
The cage also increases the frictional resistance to relative rotation. During normal torque loading, the primary balls continue to roll on the flat driving surface of the input gear. The cage displaces the input gear against the bias of the spring. This action maintains the assembly in this arrangement. The cage then rotates through the other half of the input gear’s axial angle. When the primary balls roll out of their pockets, the cage is forced axially toward the fixed backing plate.
The cage also has a secondary ball stop, which limits the travel of the secondary balls. Secondary balls are seated in terminal positions on the input gear. These balls roll out of secondary ball pockets 68 and 70. They may also be positioned in terminal positions. The secondary balls travel over ramps 69 and 72. They are sized to maintain a axial separation distance between the driving surface and the detent surface.
The primary balls are seated in the primary ball pockets 40 and 50 in the driving surface of the input gear. The cap projects into the primary ball pockets 50 in the detent surface 48. A plurality of secondary balls are seated in secondary ball pockets 68 and 70 in the driven surface of the cage. This action prevents the input gear from being displaced by the spring 20.

Friction torque limiter

Essentially a shaft-to-shaft coupling, a friction torque limiter combines economy and simplicity. The unit is designed to protect against excessive torque and also prevent damage from overloads. Typically used in conjunction with other drive components, a torque limiter is easy to install and replace, providing simple, cost-effective protection.
Torque limiters are available in many formats, including basic shear pins, ball detent units, and pneumatic controls. Each type of torque limiter must be designed for a specific application. Some systems offer a single position device, while others allow the operator to adjust settings to prevent overloads.
Torque limiters are commonly used in a wide variety of applications, including conveyors, sewage treatment plants, and power stations. These devices provide simple, cost-effective overload protection, and can be used in both directions of torque transmission.
Friction torque limiters are ideal for applications that operate under dusty conditions. They are also more predictable than shear pins, and can be adjusted to a variety of torque levels. The H-diameter calibration system on a GEC model, for example, makes it easier to determine the best torque setting for a given application.
Torque limiters can be coupled to any combination of rotating bodies, including shafts, pulleys, gears, and motors. They can be adjusted with an adjustable nut, and a variety of spring sets can be fitted to provide different torque ranges.
Torque limiters may also be equipped with a limit switch, which permits control of the motor drive system. If a torque overload occurs, the limit switch will signal the control system to shut the motor off.
Torque limiters are usually made from durable heat-treated steel. Some models come with bronze bushings for additional protection, and some offer a random reset device. To determine which torque limiter is right for your application, consult a factory. Regardless of the type of torque limiter you choose, it should have the right torque range and the right bore size.
In addition to preventing overloads, friction torque limiters can also help prevent damage to drive components, especially when they are used in conjunction with gears, sprockets, and pulleys. They are also simple to install and replace, providing simple, cost-effective, and user-friendly protection. limiter torque

Reset style of limiter

Depending on the application, there are several styles of torque limiters. It is a good idea to consult a manufacturer in your area for the specifics. You’ll also want to make sure your new tool is the most effective fit for your application. A good rule of thumb is to match the output of your machine to the inputs of your torque limiter.
A good torque limiter should offer the following: a minimum of lost motion, a low frictional drag, and a low operating temperature. Some manufacturers offer a host of options, including a variety of materials and sizes. It is also worthwhile to select a torque limiter based on its mounting surface. Ideally, you want it to sit as close to the output of the machine as possible.
The best torque limiters are not only clever, they also offer a high degree of safety and reliability. They come in several varieties, from a simple pawl and spring configuration to hydraulic pressure and pneumatic pressure to complex synchronous magnetic and synchronous magnetic coupled units. Choosing the right one for your application can make a world of difference, especially if you want to make sure your equipment runs smoothly and efficiently.
One notable exception is a hydraulic torque limiter, which is seldom used for a simple reason: they’re too expensive. They are a bit complicated, and tend to occupy much more space than their petrochemical cousins. They also tend to require a lot of maintenance, especially if you’re dealing with a corrosive environment. The biggest disadvantage is that they often do not work well in high-stress environments. Fortunately, there are more cost-effective solutions to this problem. You should also know that a torque limiter is a safety device, so you should make sure to use one. This type of equipment is also useful in correcting misalignment and parallelism errors, so you’ll want to be sure you’re putting it to good use.
A torque limiter is a safety device that must decouple from the driven device when overload is detected. They are a worthwhile investment, and can be a useful tool in correcting misalignment and parallelism mistakes, ensuring your machine runs smoothly and safely. limiter torque

Synchronous magnetic torque limiter

Basically, a torque limiter is a device that is used to limit the torque of the system. It protects the mechanical system of the machine from overload and damage. These devices are usually integrated into the drive train of a table-based machine or hand tool. In some cases, they may be reset automatically, while others need to be reset manually.
There are two kinds of torque limiters: the mechanical and the disconnect. In the mechanical type, a spring or a pawl is used to limit the torque. In the disconnect type, a mechanical component is sacrificed to allow the torque limiter to disconnect the drive. The disconnect type may be reset manually, while some may need to be reset automatically.
The synchronous magnetic torque limiter is a type of limiter that uses two magnets on each shaft of the machine. This type of limiter has some advantages over mechanical types, but there are also disadvantages. For example, it may have more backlash than the mechanical types. It may also transmit torque through a physical barrier. These disadvantages are sometimes offset by the fact that the synchronous magnetic torque limiter is able to work quickly and smoothly.
The torque limiter is usually the last gearset installed in a transmission assembly. It protects mechanical systems from overload and prevents the engine from burning out. Some types of torque limiters may require adjustment, but most of them do not. A torque limiter can be found in many cordless drills. Often, the torque limiter is positioned inside the planetary gearset.
The variable magnetic gearbox is another type of torque limiter. This type is a rotational device that uses a variable ratio magnetic gear. The variable magnetic gearbox uses about 25% of the input power and has lower maintenance requirements. It also has a lower output torque. It can be used to effectively limit the torque of a system.
A magnetic particle clutch can also be used as a torque limiter. This type of limiter is similar to the friction plate clutch. It can be integrated into a cylinder head. This type of clutch can be dynamically set or statically set.
China TSC Steel Ball Torque Limiter AQ Adjustable Ball Overload Motor Protector Safety Clutch Factory torque limiter browning
editor by Cx2023-07-11

China COUP-LINK CNC Machine Quality Shaft Flexible Zero backlash Aluminum Setscrew Jaw Spider Couplings For Encoder For servo motor torque limiter electric motor

Applicable Industries: Producing Plant, Machinery Mend Stores, Other
Personalized assistance: OEM, ODM
Structure: Jaw / Spider
Flexible or Rigid: Adaptable
Standard or Nonstandard: Normal
Substance: Aluminium, Aluminum
Product name: Jaw/spider coupling
Manufacturer: COUP-Url
Kind: Versatile jaw coupling setscrew
Floor Treatment method: Anodizing
Certification: ISO9001:2008
Shade: Silver
MOQ: 1pcs
Payment: T/T
Service: Complex Assist
Packaging Details: common carton or picket circumstance in accordance to consumers enquires.
Port: HangZhou

Coupling Flexible Coupling Types Of Motor Jaw/Spider Couplings LK8

Brand	Coup-hyperlink
Custom	Support

Solution Information Item Paramenters Certifications Company Profile About UsHangZhou Link Automation Products Co., Ltd. is started in 1998, positioned in its possess unbiased “Url Industrial Park”, a expert maker of creating and producing of substantial-precision couplings, ball screw help units, 24 types CZPT Rose Gold Silver 925 silver plated Copper Basic snake bracelet For Pan silver snake chain bracelet motor brackets and motion modules. Our coupling item strains include servo motor couplings, stage motor couplings, micro motor couplings, encoder couplings and so on. Positive aspects:- Innovative technology – Very own Investigation & Growth middle- In-property processing & test methods- ISO 9001:2015 certification- ROHSSo far, we have far more than 30 solution traces, which are commonly used in high-precision connection and a variety of computerized equipment and equipments in the discipline of electronics, solar vitality, photovoltaic market, device resources, Wholesale Easter Reward Christian Jewelry Religious Jesus Cross Ring Ornaments Males Females Hand Jewellery Stainless Metal Cross Rings packaging, molding, health care, print and other industries. The goods have been accredited and wided used by best-course buyers in Japan, United states of america, Germany, Israel, Malaysia, Singapore, China ZheJiang globally. We also have agents in Japan and United states of america. Our Manufacturing facility FAQ 1.Q:How can we guarantee high quality? A:Always a pre-manufacturing sample before mass creation Usually closing Inspection prior to cargo Manufacturing unit mould plastic injection mould customized digital enclosure plastic mold 2.Q: Can you make in accordance to consumers style? A: Positive, we are skilled manufacturer OEM and ODM are equally welcomed. If you want more selection or share your ideas with us, remember to kindly speak to us with out hesitation.3.Q:what solutions can we provide? A:Recognized Shipping and delivery Phrases: FOB,CIF,EXW,FCA,Specific Delivery； Acknowledged Payment Currency:USD Approved Payment Type: T/T Language Spoken:English,Chinese4.Q:How is your value? A: Though we have model-name merchandise, Little gearbox Fishing boat Offshore vessel Higher good quality Ship 16A Gearbox Boat Gearbox HangZhou, China our costs are extremely favorable and aggressive.Simply because of our very best price tag, clients from all over the world come to buy our products.5.Q:Can I request to advance the cargo? A: It should be relies upon on whether or not there is enough stock in our warehouse.6.Q: Why you choose us? A: We often think honesty and responsibility are foundation of 1 company, so whatever merchandise we give for you all are competent. We will have goods analyzed and supply COA just before shipping for positive.

limiter torque

Choosing the Right Limiter Torque

Mechanical

Electrical

Disconnect types

Placement

Having a torque limiter on your machine can prevent damage to your components and your machine from overloading. They also protect the motor and the gearbox from jams. They reduce the torque required to move a conveyor or prime mover.
Torque limiters are found in all kinds of machine and processing equipment. They are especially useful in systems that require human interaction. They eliminate downtime caused by damaged components and eliminate the need for replacement parts. They are also ideal for applications that have a +/- 10% variance in torque.
Torque limiters typically include a spring-preload control element that uses special methods to limit the backlash that can occur between a drive element and a control element. Some systems also offer a random reset device that allows the operator to choose a new setting to reduce the risk of overload.
Another type of torque limiter is a friction type. This is a simple, low-cost method of overload protection. Unlike a shear pin, which requires lubrication, a friction type torque limiter operates much more accurately. When an overload occurs, the device breaks free before it hurts something. They are also more dependable than shear pins. The teeth on a friction torque limiter are aligned to mesh with each other and they are usually made of metal. They can also have bronze bushings for added strength.
Electromagnetic torque systems are similar to pneumatic torque systems, but they use electric current to energize a magnetic coil. They are also spring-set. This type of torque limiter is more reliable than a pneumatic one. It also has fast switching functions.
Torque limiters are usually found in industrial facilities, but they are also found in many commercial and consumer applications. Torque limiters can be used to couple gears, sprockets, motors, and even pumps. The size of the torque limiter will depend on the torque load and the machine cycle requirements. Some torque limiters are made to fit a single shaft, while others are made to couple several. Some types of torque limiters are made with a keyless locking mechanism to reduce the risk of backlash.
China COUP-LINK CNC Machine Quality Shaft Flexible Zero backlash Aluminum Setscrew Jaw Spider Couplings For Encoder For servo motor torque limiter electric motor
editor by Cx2023-07-11

China SMRV Aluminium Worm Reducer With Torque Limiters electric motor torque limiter

Warranty: One particular 12 months
Relevant Industries: Garment Retailers, Constructing Materials Stores, Production Plant, Foods & Beverage Manufacturing unit, Farms, Foodstuff Shop, Printing Stores, Design works , Energy & Mining, Foodstuff & Beverage Outlets, Advertising Company
Fat (KG): 9.3 KG
Personalized assist: OEM, ODM
Gearing Arrangement: Worm
Input Pace: fourteen Merce-des Truck Part other gearboxes are also manufactured in our factory,remember to search in excess of the adhering to photo and get a common concept about our merchandise. For more details,make sure you make contact with me and we will talk much more.We are always right here,all set to serve you nicely with efforts.Please download the catalogues from the weblink,http://sihaireducer.com/obtain.asp for a lot more information and much better comprehension,

Certification,

Our normal deal for aluminum worm reducers,
one.For air cargo or samples by courier,the products will be packed in carton boxes
2.For sea delivery,every one device is packed in carton box,then several dozens of carton bins in wooden pallet so as to safeguard the products from getting damaged.

In addition to the RV worm reducers,other gearboxes are also created in our manufacturing unit,remember to search more than the adhering to image and get a common thought about our goods. For far more information,make sure you get in touch with me and we will discuss more.We are usually listed here,all set to serve you well with efforts.

Samples and Refundable,
Samples are charged and the purchasers will be held liable for the supply
expenses from our manufacturing unit to their spot by TNT,DHL,EMS or other strategies, GJF Car Automobile Parts Remaining and Correct Outer CV joint Axle For Mazda 626 M6 GG B90 B70 GF MZ-1-034A but these fees can be refundable by deduction from the payment of the order afterwards.
Our support,customization and ensure,
Customization is offered for some components and the package,and many others,so if there are some unique requirements,please tell us evidently,then the possibility or added value can be checked and verified.
The guarantee period of time of our all items is 1 yr from the day of cargo,subject to suitable application and operationDuring the promise time, cost-free elements or full models will be supplied to exchange the broken ones of good quality issues and free of charge technical assist all the time.

Aside from this product,any query about other types,remember to do not be reluctant to get via to us,we will constantly be all set to provide you effectively with our efforts.

Attention,
Make sure you kinldy be mentioned that some info loaded in the method only complies with the program itself,not the correct 1,like the delivery time,sample delivery charges,and so on.which will decide on the actual order later,so if there is any confusion or some thing alike, Cheap Manufacturing facility Value Deal One Box Greater Product Extended Existence Tapered Roller Bearing you should get back again to us and we will talk a lot more in information for the specifically proper data.Thanks a great deal!

limiter torque

Types of Torque Limiters

Regardless of the type of application, there are several types of torque limiters available. Some of these types include Ball detent limiters, Hydraulic torque limiters, and Magnetic torque limiters.

Ball detent limiter

Typically, the ball detent torque limiter is used in applications where precision is essential. For example, in packaging or textile applications, the detent can limit the amount of torque transmitted from the input gear to the output gear. In some applications, the torque limiter is a preferable option over a slip clutch.
The basic ball detent mechanism involves a series of metal balls encased in two circular plates. The balls are held in place by springs. In normal operation, the balls rest in sockets within a pressure flange. However, in an overload situation, the balls are forced out of the sockets and into the detents. The balls are then forced back into the sockets by the springs. This action continues until the overload is removed.
The ball detent torque limiter has a unique design that provides reliable overload protection. The balls are held in place by springs and the assembly rotates with the driven machine until an overload occurs.
The balls are sized to maintain a predetermined axial separation distance between the driving surface of the input gear and the detent surface of the backing plate. This axial separation distance is greater than the diameter of the primary balls. When an overload is sensed, the springs disengage the balls and the ball detent torque limiter releases the load.
In addition to the ball detent torque limiter, there are several other types of torque limiters. Some of them are simple shear pins or cam followers, while others are pneumatically engaged. These types of torque limiters can be used in conjunction with limit switches.
The ball detent torque limiter may be manually engaged when the over-torque condition is corrected. The limit switch can be manually activated or can be automatically triggered by a proximity sensor.
Torque limiters can be used to prevent physical injury to personnel and damage to sensitive equipment. They are available in various designs, including single-position and multi-position units. Many servo-driven axes are equipped with these devices. They are commonly used in mechanical wastewater treatment plants and in chain couplings.
Unlike other torque limiters, the ball detent torque limiter can accurately disengage at the preset torque value. It also has a more predictable response time than other types of torque limiters.

Magnetic torque limiter

Using a torque limiter in conjunction with a motor can be a tricky business. It requires an understanding of the mechanical gearbox and torque limiter and how they work together to reduce mechanical vibrations and achieve the correct torque levels.
A torque limiter is a simple device that transmits torque through magnetic interaction. It is a useful device for measuring and controlling the tightening of implantable medical devices such as screws and plates. Magnetic torque limiters offer several advantages over conventional devices, including increased durability and reliability. They can be sterilized and are easy to clean. In addition, they require little maintenance and are not prone to wear and tear.
Magnetic torque limiters have two main components: a handle with a cylindrical body and a mono-block shaft. The handle has an arm that enables it to be adjusted and the shaft has an arm bearing to make it movable. The handle may be used on shafts with different drive geometries.
The handle has a rotating collar that is indexed with ball detents to allow it to be adjusted. The collar is user-accessible and has the capacity to do more than just compress or extend the torque limit. It can also be used to change the gap between the two magnets in the handle.
The main component of the magnetic torque limiter is the handle, which includes a pair of magnets with opposing poles. This configuration has the magnetic effect of generating a torque from the magnetic hysteresis resistance of the magnets. The magnets are linked together by metal pins, which can be replaced.
The first pocket (4) is located on the first side of the cylindrical handle-body. The second pocket (5) is located on the second side. Both pockets contain at least one magnet, preferably a neodymium magnet. The pocket on the first side intersects the second pocket on the second side in the central through bore. The main objective of this pocket is to transmit the smallest possible torque from the input to the output.
The best way to find out how the magnetic torque limiter of the present invention performs is to put it to the test. Several tests have been conducted to determine its performance. The results show that it translates 24 Nm at a nominal speed of 2500 rpm from the input to the output. limiter torque

Hydraulic torque limiter

Using a Hydraulic Torque Limiter to protect equipment from excessive torque is beneficial in many applications. These devices are a safe way to maintain maximum torque in a power transmission system. They are available in many different types, and can be used in practically any application.
They are able to protect from excessive torque by controlling the flow of gas and hydraulic fluid in the drive system. They are used in various applications, such as conveyors, assembly lines, and industrial robots. They are used to protect equipment from overloads, and assure minimal downtime.
They are also used in applications where the driven device cannot absorb all of the output torque. The torque limiter transfers the torque from the driving shaft to the driven member. The torque limiter is also used to couple gears, sprockets, and other rotating bodies. The torque limiter transmits torque at a specified level, and stops transmitting when the torque exceeds a preset value.
Torque limiters are generally light-weight, and can be easily mounted. However, they can present a safety hazard to operating personnel. They are used in many different industries, including textile, woodworking, printing, and converting machinery.
The torque limiter is used to disconnect the inertia of the system from the jammed section, which prevents damage. In this instance, the limiter is placed as close as possible to the jam source.
Torque limiters operate by comparing the internal pressures in a hydraulic cylinder. When the pressures exceed a specified value, the torque limiter stops transmitting and begins disengaging the driven device.
These devices also allow for the use of smaller prime movers and less fuel. They can also be used to prevent stalling of the prime mover under heavy loads.
Torque limiters are available in a variety of sizes and are typically used in applications where the driven device cannot absorb all of the output torque. They are used in many industrial robots, conveyors, assembly lines, and printing and converting machinery.
Torque limiters are available in mechanical, hydraulic, and synchronous magnetic types. Some of them can tolerate continuous slip, but some are designed to slip at a specified torque value. limiter torque

CZPT Electric torque limiter

Whether you need an industrial clutch, electromagnetic brake, or torque limiter, CZPT Electric has a solution for you. This company offers the broadest range of industrial products and brakes, as well as customized solutions for your application. The company’s products are used across a wide range of industries, including material handling, crane and motion control, elevator and escalator, forklift, turf and garden, marine propulsion, and sewage pumps.
It has a large sales and distribution operation in North America, and is available in over 70 countries. The company’s products are designed to meet industrial demands for quality, performance, and reliability. Its line of Adjustable Torque Controls are designed to provide soft starting functions, as well as repeatable stops.
Torque limiters are used in many different industries, including steel mills, conveyor drives, process pumps, marine propulsion, and paper mills. They are designed to separate the load from the drive when an overload occurs. They offer both mechanical and electronic solutions, and are available in an open or closed design. They can operate at a range of 160 to 11,000 rpm. They also feature a shear neck, fail-safe, wedge-shaped construction, and clamping screws. They are available with RoHS compliant options, as well as CE certified.
These limiters also feature a proximity sensor target that can be used to switch off the drive after an overload. CZPT Electric has several models with full range torque control, which provides repeatable starts and stops. They can also be used with electrically released brakes. The company also offers a variety of clutch/brake combinations, including a wide selection of models with a ball detent or synchronous magnetic disconnect.
CZPT Electric’s products are manufactured to a high standard and are designed to meet the demands of today’s industrial applications. The company has a wide range of product catalogues available for browsing. You can find a list of available products and more information on the company’s website, which can be accessed by clicking on the “Product Catalogues” button at the bottom of the page.
China SMRV Aluminium Worm Reducer With Torque Limiters electric motor torque limiter
editor by czh 2023-06-27

China hot sale giicl standard flexible torque limiter drum-type gear motor coupling torque limiter device

Relevant Industries: Manufacturing Plant, Equipment Fix Shops
Composition: Equipment
Flexible or Rigid: Versatile
Common or Nonstandard: Regular
Substance: Steel
Name: drum gear coupling
Colour: Customized Requirement
Floor Remedy: Carburizing, blackening, electroplating, quenching.
warmth remedy: Large frequency quenching warmth treatment
MOQ: 1set
Entire body Material: 45# Metal
Bundle: Personalized Standard
PAYMENT Phrase: T/T
Solution Key phrases: drum-kind equipment motor coupling
Solution name: normal adaptable torque limiter drum-sort equipment motor coupling
Packaging Specifics: scorching sale giicl normal flexible torque limiter drum-sort equipment motor couplingWooden box Or Custom-made
Port: ZheJiang

very hot sale giicl normal versatile torque limiter drum-variety gear motor coupling

Item Drawing

Introduction Of GIICL Drum Equipment Versatile Coupling
GIICL Common Kind Drum Gear Coupling are flecible coupling, gear coupling is composed of internal equipment and the exact same variety of teeth of the flange 50 percent band coupling elements and many others.. Exterior enamel into straight enamel and 2 varieties of drum equipment tooth, the drum tooth is teeth produced of the outer sphere, spherical centre of the equipment axis, gear backlash is big, the G II type CL giicl enables a more substantial angular displacement (relative to the straight tooth coupling), contact the problem can boost the tooth, improve the capability to transfer torque, extend the provider lifestyle. The contact condition alongside the width of the tooth with angular displacement. With the radial, New Solution Shaftless Stone Screw Conveyor Quarry Shaft axial and angular and axial deviation payment capability, has the advantages of compact construction, modest turning radius, its huge carrying potential, substantial transmission performance, reduced sound and long upkeep cycle, especially ideal for low speed and heavy load issue, this kind of as metallurgy, mining, lifting, transportation and other industries are also relevant to the generate shaft of petroleum and chemical sector, general equipment and other sorts of machinery.

In depth Images
Packaging & Transport
About Us
Xihu (West Lake) Dis. county CZPT transmission equipment manufacturing co., BOWDEU Doorways safety metal doors exterior for houses major entrance front entry metallic anti-theft for house gate manufacturing facility wholesale LTD. is a enterprises that specialized in study and manufacturing coupling. Also we can produce new merchandise and bulk-generation. With rich experience, specialist R&D team and various products in coupling, it has outstanding problems to satisfied your different needs.
Business primary merchandise are: all varieties of couplings for machinery market all in excess of the term , these kinds of as radial elastic coupling, tyred coupling, universal coupling, drum equipment coupling, plum flower type elastic coupling, rigid coupling oldham coupling, roller chain coupling, diaphragm coupling, coupling column elastic sleeve pin couplings, Reacher New Healthcare Gear Special 24v 6571 Brushless Dc Outer Rotor Frameless Motor for Cobot Arm elastic dowel pin, elastic dowel pin coupling, pump shaft coupling, and so forth..
The principles of our firm is dwell on high quality and develop on honor. The coupling has the gain of substantial good quality, reduced price tag, complete merchandise types.Our firm will be your ideal option, and we look CZPT to cooperate with you.

FAQQ1: Are you investing firm or manufacturer ?
A: We are manufacturing facility.

Q2:Do you offer samples ? is it totally free or extra ?
A: : Sure, we could provide the sample but not for free of charge.Really we have a quite good price tag principle, when you make the bulk buy then expense of sample will be return to you.

Q3: How long is your delivery time?
A: Normally it is 10-15 times if the products are in inventory. or it is 7-25 times if the items are not in stock, it is according to amount.

This fall:How lengthy is your guarantee?
A: Our Guarantee is 12 thirty day period.

Q5 :Do you have inspection techniques for coupling ?
A:one hundred% self-inspection ahead of packing

Q6. What’s your payment?
A:1) one hundred% T/T. 2) 30% in progress, other folks ahead of shipment. 3) L/C Q7:Can I have a go to to your factory ahead of the buy? A: Certain,welcome to check out our factory.
Speak to UsIf you are fascinated in our products, Very hot marketing trailer axles trailer clevis hitch trailer wheel hub and want to know much more details,
you can click on the under or click on listed here to send us your inquiry.
we will reply quickly.

→ Click Listed here To Homepage

limiter torque

CZPT(R) Tolerance Ring For Limiter Torque

CZPT(r) Tolerance Ring

CZPT TL

IWIS FT series

TL-IT inline

TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.
China hot sale giicl standard flexible torque limiter drum-type gear motor coupling torque limiter device
editor by czh 2023-06-27

China Overhead Crane Overload Limiter System electric motor torque limiter

Solution Description

Product Description
WTZ A100N Overload limiter can be in the type of Chinese figures, graphics, people and so on thorough display the numerous parameters in the method of operate.
As the main hook load, vice hook load, perform boom Angle, length of boom, radius, etc.

○Overload Limiter Alarm function
Have sound and gentle alarm operate: when the crane increase operate amplitude restrict near to operate, when lifting load and torque system shut to the permitted load restrict, torque method issued a warning of gradual beeping seem. Warning lights flashing slowly torque method.
When jib frame function scope to function restrict, when the lifting load and torque reaches equipment when the permitted load restrict minute send urgent alarm beeping sound. Shortness of torque method alarm indicating crimson gentle flashing.

○ Overload Limiter safety function
Manage output function: when boom amplitude restrict near to function, operate when lifting load and torque system close to the permitted load limit, the program output torque manage sign to cease the crane carry on to carry on to run in the path of danger, enable crane moves in the course of safety.

Load Second Indicator(risk-free load indicator or Crane personal computer) is a system which is put in on a variety of kinds of cranes like cell, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the lift is exceeding the protected working range. In some circumstances, the device will bodily lock out the machinery in conditions it establishes to be unsafe.

It controls the lifting products to function as for every the manufacturer’s suggested protected load charts. Each of the measured parameters like load bodyweight, working radius, handle restrict,angle and extension of the crane increase, etc will then further be shown in the operator’s cabin.

WTZ-A100N Overload Limiter ( LMI ) System

Specialized Parameters

Info LOGGER

Information USB downloadable: constructed-in USB interface, can help working data obtain, can review the historical information from any time time period. By way of the analysis of the document, the total position of website operation can be restored. Ultra-massive Potential: the gadget can assistance true load data 50,000 circular logging, larger capability than the regular 16000 record.

Knowledge Report Picture

Installation Situations

Certifications

Company Details

Weite Technologies Co.,Ltd

Founded in 2002, it is countrywide hello-tech organization positioned in HangZhou, China. It has been concentrating on R&D and OEM producing of lifting protection defense units this sort of as Load Instant Indicator, Safe monitoring systems, overload limiter, Load mobile, Anemometers and so forth.We continuously concentrate on making sure lifting equipments operate securely as lengthy-term pursuing aim.

“The dependable Protection Associate for Global Prime a hundred Crane Proudly owning Organizations like Tat Hong, Asiagroup, Massive Crane and Fortune five hundred corps” . Today, WTAU items are widely used in marine market,electrical, chemical, metal, metallurgy, design, ports and other industries, and have been extensive spreaded to more than thirty countries and areas.

World-wide Companions

FAQ

one) Is your company effectively-reputated? How to show that?

It is a China Prime 3 model focusing on Crane Security Protection Tools. We are also Basic safety Partners for International Prime a hundred Crane Proudly owning Organizations like Tat Hong(leading 9), Asiagroup(top forty five), Huge Crane(prime ninety four) and Prime five hundred organizations these kinds of as ABB, Macgragor,TTS,CNOOC,and so on. Goods are been sold to in excess of thirty nations and regions globally.

two) How to guarantee the top quality?

The Item Warranty for the overall product is twelve months. Any problem after set up, we will adjust the new 1 for cost-free.

three) How to install the LMI?

English Person Guide(contain all the specifics of every item) will be offered for installation and difficulty capturing(refer to the pic underneath). Also free of charge Distant Instant Technical support would be provided by our english engineers. Or we can ship our engineers to support you domestically.

four) How much is your LMI system?

Deliver me the crane product, hook quantity, operating problems(Luffing Tower Operating Condition, Pilling) and particular prerequisite and the like. Your make contact with info is a should.

five) How can I spot buy?
A: You can make contact with us by e-mail about your get information, or place buy on line.

six) How can I shell out you?

A: Following you verify our PI, we will ask for you to shell out. T/T and Paypal, Western Union are the most common techniques we are utilizing.

Associated Merchandise

US $1,990
/ Piece
| 1 Piece

(Min. Order)

###

Type:	Gantry Crane & Portal Crane
Application:	Hoisting Machinery
Certification:	CE, ISO9001: 2000, ISO: 9001, Ce
Condition:	New
Task:	Adjust
Structure:	Combination

###

Customization:	Available \| Customized Request

US $1,990
/ Piece
| 1 Piece

(Min. Order)

###

Type:	Gantry Crane & Portal Crane
Application:	Hoisting Machinery
Certification:	CE, ISO9001: 2000, ISO: 9001, Ce
Condition:	New
Task:	Adjust
Structure:	Combination

###

Customization:	Available \| Customized Request

CZPT Torque Limiter Products

Whether you’re looking for a magnetic torque limiter or a permanent-magnet synchronous limiter, CZPT(r) has a torque limiter solution for you. In addition to these products, we also offer Roller-detent and Challenge torque limiters.

Over-torque limiters

During heavy duty high cycle operations, it’s critical to have the proper equipment for maintaining torque levels. Having the right torque limiters can protect your machine from damage and help to reduce the frequency of downtime and cost of repair.
Torque limiters work to prevent the buildup of rotational energy, which can cause mechanical overloads. The torque limiter system detects the overload and disconnects the drive from the driven components. When the torque level drops below the preset level, the device reengages.
Torque limiters are widely used in industrial and assembly line applications. They are used in manufacturing equipment such as industrial robots and printing and converting machines. They are also used in conveyors and woodworking machines.
There are many types of torque limiters available. The most common are mechanical and hydraulic. The mechanical torque limiters can be installed in a single point or multiple points in the machine. Hydraulic torque limiters are a compact option for accurate torque overload release. They also allow users to set a precise disengagement torque value.
Typically, these devices are adjustable with a single screw. For offset mounted systems, an external bearing may be required. Most quality torque limiters include a bearing between the base of the clutch and the output flange.
Mechanical torque limiters are available in a variety of sizes and designs. They can be used in virtually any application. They provide an integrated mechanical and electrical design. limiter torque

Magnetic torque limiters

Using Magnetic Torque Limiters will increase the reliability and durability of your equipment. They also help prevent catastrophic failure, which is essential for preventing downtime. They are used in a wide range of applications, including printing and converting machines, woodworking machines, conveyors, and many more.
They are designed to disengage from the driven system when the torque load exceeds the design limit. This protects rotating equipment and machinery from torsional strain and other hazards. They are also designed to provide precise overload protection. Using a torque limiter can protect equipment through its entire life cycle. It may prevent a mechanism from failing or even prevent a workplace accident.
A torque limiter is typically packaged as a shaft coupling. It is also available in other forms, such as friction-plate couplings and magnetic particle couplings. It is also available in many different sizes. It is important to choose a torque limiter that is right for your needs. The design of the torque limiter must match the type of torque load generated.
They are used in a variety of applications, including speed and torque sensors, acceleration sensors, position sensors, and more. They also can be found in various counters, tachogenerators, scales, and measuring devices.
Magnetic torque limiters are lightweight, require no maintenance, and don’t suffer wear and fatigue. They also can be used at any temperature. They have a quick response time, and they can reduce the transmission of torsional vibrations.

Permanent-magnet synchronous torque limiters

Various types of torque limiters are available in the market. These include friction torque limiters, magnetic particle clutch torque limiters, and spring-loaded pawl-spring torque limiters. These devices are used to limit the torque transmitted from an input shaft to an output shaft. These devices reduce the force experienced by the drive train components and thus enhance the reliability of electromechanical actuators. They protect expensive components from damage and physical injury.
In a magnetic particle clutch torque limiter, a magnetic field is generated from current. This field is transmitted to an output shaft through a physical barrier or air gap between the magnetic field lines. Magnetic particles in the assembly lock into chains along the field lines. The torque generated is statically or dynamically set. The torque is proportional to the current passing through the windings.
Friction torque limiters are used in various applications such as robotics. These devices have a radial and axial design. They also utilize sensors to prevent overload. These devices are also used as shaft-to-shaft couplings. The torque density is good and the devices are easy to operate.
Permanent-magnet synchronous torque limiters are another type of torque limiters. This type uses twin discs with mated magnets on their faces. These devices are fast acting and provide quick response. They can also have backlash.
In a permanent-magnet synchronous torque limiter, the magnetic field is generated from an excitation source. This field then interacts with a PM field to generate torque. limiter torque

Roller-detent torque limiters

Whether you’re working on a manufacturing or processing line, it’s important to be aware of the various types of torque limiters and how they work. They can protect your equipment from overload and damage, and prevent physical injury to personnel. These devices can also be used in industrial robots, assembly lines, printing and converting machines, and conveyors.
Torque limiters can be mechanical, pneumatic, or electronic. Some systems have a single-position device, while others have a flexible coupling model that allows small parallel offsets and angular misalignments. Some systems also offer random reset devices.
Torque limiters are designed to protect expensive components from overloaded conditions. Modern machines have a predictable motion and torque, but unexpected forces can exceed their design limits. They can also eliminate physical injury by isolating driving and driven equipment from each other when overload occurs.
Mechanical torque limiters are available in a wide range of sizes and are designed for use in virtually any application. They are also backlash-free and offer superior repeat accuracy. They are ideal for processing different materials, and are suitable for applications such as woodworking.
Electronic torque limiters are less expensive than mechanical devices, and offer a more reliable control mechanism. They can apply pressure to thrust flanges and control the volume of air in the air chamber. They are commonly used in sheet metal processing equipment, printing and converting machines, and industrial robots.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is a custom-designed component that is used to transfer torque and axial force between mating components. The component can be used as a slip clutch and as a force limiter.
The tolerance ring may be made from metal, such as nickel-copper, spring steel, carbon steel, or copper-beryllium. The material may be heat-treated to provide the desired hardness and durability. The tolerance ring is typically curved to facilitate assembly. The tolerance ring can also be manufactured as an annular band.
The tolerance ring includes a generally cylindrical body. The body may be formed with a slit down the side. The body may also be constructed with one or more rows of projections. A tolerance ring is typically located between the inner component and the outer component. The tolerance ring transfers torque between the inner and outer components.
A tolerance ring may have an apex radius of no less than 1.01 RB. The base radius is measured perpendicularly from the ring’s central axis to the outer surface of the apex.
A tolerance ring may be arranged in a centered or piloted configuration. A centered configuration requires grooves in the bearing housing. A piloted configuration uses a step instead of a groove.
In a two-layer tolerance ring configuration, the first layer may include a plurality of radially extending projections. The second layer may include a smooth, regular surface. The two layers may overlap in some locations. When the layers overlap, the second layer may act as a sleeve around the inner component. The second layer may also act as a diffuser for transmitted force. limiter torque

Challenge torque limiters

Designed to optimize torque and speed in drive systems, the Challenge torque limiter is available in torque ranges of three to 1090 Nm. Using an array of spring loaded friction discs, Challenge torque limiters are capable of adjusting force to the tune of a small percentage of the total torque. Whether you need a pilot bored unit or a completely custom machined model, Challenge has the expertise and resources to ensure your requirements are met.
In fact, the company has the largest line of torque limiters in the world. These units are capable of supporting shaft diameters ranging from 9mm to 64mm. They are also able to provide reliable overload protection. Having a torque limiter mounted in your machine is the smartest decision you can make.
The company also offers a range of torque limiters that are specifically engineered to address the needs of industry sectors such as automotive, aerospace, and medical. Aside from torque limiters, the company also offers other product solutions such as servo motors, actuators and cylinders, and power transmission systems. The patented R+W torque limiter has a proprietary patented operational principle that can be adjusted to match the application and meet its intended use. They are also available in a variety of torque ranges, sizes, and capacities. They also offer a comprehensive warranty and service program. They have a plethora of applications in industrial robots, conveyor systems, assembly lines, and even printing and converting equipment.
China Overhead Crane Overload Limiter System electric motor torque limiter
editor by czh 2022-12-15

in Busan Republic of Korea sales price shop near me near me shop factory supplier 24VDC 50 Rpm High Torque Drive PMDC Worm Geared Motor with Gearbox Gear Reducer manufacturer best Cost Custom Cheap wholesaler

in Busan Republic of Korea sales price shop near me near me shop factory supplier 24VDC 50 Rpm High Torque Drive PMDC Worm Geared Motor with Gearbox Gear Reducer manufacturer best Cost Custom Cheap wholesaler

Our product selection involves all types of helical equipment, spur equipment, bevel gear, equipment rack, worm gear, sprockets,chains, bearings. ensures the security and regularity of the essential function of factors. EPG was awarded with “famous product of Zhejiang Province” and “famous manufacturer of Zhejiang Province”. 24VDC fifty RPM Large Torque Generate PMDC Worm Geared EPT with EPT Gear EPT

Design:D76R-24v150w-50rpm

Kind	dc worm EPTed motor
EPT Diameter	76mm
Voltage	12v 24v 36v 42v 48v 60v
EPT	le150W
Torque	le20N.M
Speed	le300RPM
Gear of ratio	75:one 65:1 sixty:1 47:two twenty:1
Gear Modulus	75:one M=.eight 47:2 M=one.25 sixty five:1 60:one 20:one M=one
EPT of EPT	Plastic / brass
OEM/ODM Support	Accept
Use	EPT pump ,electric powered forklift ,vending EPT, XiHu (West Lake) Dis.Hu (West Lake) Dis.age door opener,automated sliding doorway,electric powered resources .

HangEPT HuiEPT EPT amp EPT Co.,Ltd is a subsidiary of HangEPT Wewin EPT Co.,Ltd.The factory is located in EPTdu,HangEPT,we can design and manufacture of motors according to all our customers’ requires so considerably,we can manufacture about 60,000 motors for each thirty day period.

Our principal marketplace:

Europe,The usa and Asia,incXiHu (West Lake) Dis.Hu (West Lake) Dis. United Kingdom, Germany, EPT, France, Sweden, United Point out,Brazil,India,Korea and so on.

Firm Benefits:

one. Big generation capability, rapidly delivery.

two. Stringent QC inspecting policies: all products need to be one hundred% inspected prior to shipping.

three. OEM/ODM providers are offered

4. 24 several hours on-line provider.

5. Prompt quotation for your inquiry

six. EPT,reliability and EPT item lifestyle.

seven. Skilled producer gives aggressive price tag.

8. Diversified abundant knowledgeable competent staff.

Much more Purposes:

Vehicle EPTlator ,XiHu (West Lake) Dis.Hu (West Lake) Dis.age doorway opener ,gate operator, EPT barrier,wheelchair ,electric powered automobile ,h2o pump ,oil pump,vending EPT,meals processor blenEPTEPT,sewing EPT, espresso EPT,welding EPT,EPT EPT,floor poEPTr,EPT elevate,stair carry,healthcare facility mattress ,EPT pump electric powered forklift.

RFQ:

Q: Are you buying and selling organization or manufacturer ?

A: We are Integration of industry and trade, with over 20 a long time encounter in DC worm EPT motor. Our company have gathered expert generation line, full administration and EPTful study help, which could match all of the customers’ specifications and make them pleasure.

Q: What is your main solution?

–DC EPT: Gear motor, Square motor, Stepped motor, and Micro motor
-Welding tools: Wire feeder, Welding rod, Welding Torch, Earth clamp, Electrode holder, and Rectifier

Q: What if I do not know which DC motor EPT?

A: Don’t be concerned, Deliver as much data as you can, our group will assist you uncover the rigEPT one particular you are seeking for.

Q: What is your terms of payment ?

A: Payment lt=1000USD, a hundred% EPT. Payment gt=1000USD, thirty% T/T EPT ,harmony before shippment.
If you have another query, pls come to feel free to contact us as beneath:

Q: How to delivery:

A: By sea – Consumer appoint EPTer, or our product sales crew discover ideal forwarEPTfor customers.

By air – Purchaser provide EPT categorical account, or our sales staff discover ideal express for customers. (Mainly for sample)
Other individuals – Really,samples deliver by DHL,UPS, TNT and Fedex and so on. We prepare to delivery products to some area from EPT appointed by purchasers.

Q: How EPT is your shipping and delivery time?
A: EPTly it is 5-10 daEPTif the products are in stock. or it is fifteen-20 daEPTif the merchandise are not in stock, it is in accordance to quantity.