Product Description

Product Description
WTZ A100N Overload limiter can be in the type of Chinese people, graphics, people and so on comprehensive screen the numerous parameters in the method of operate. 
As the primary hook load, vice hook load, perform growth Angle, duration of increase, radius, and so on. 

○Overload  Limiter  Alarm function 
Have audio and mild alarm purpose: when the crane increase perform amplitude restrict close to work, when lifting load and torque device near to the permitted load limit, torque technique issued a warning of sluggish beeping sound. Warning lights flashing little by little torque technique. 
When jib frame work scope to operate restrict, when the lifting load and torque reaches equipment when the permitted load limit instant ship urgent alarm beeping audio. Shortness of torque program alarm indicating red light flashing.

○ Overload Limiter protection function 
Manage output perform: when growth amplitude limit close to function, function when lifting load and torque system near to the permitted load restrict, the technique output torque management signal to stop the crane continue to carry on to operate in the course of threat, allow crane moves in the direction of stability. 

Load Second Indicator(safe load indicator or Crane laptop) is a gadget which is installed on numerous kinds of cranes like cell, crawler, tower, gantry, portal, maritime and offshore crane. It notify the operator if the raise is exceeding the safe running assortment. In some cases, the gadget will bodily lock out the equipment in situation it decides to be unsafe. 

It controls the lifting products to purpose as for every the manufacturer’s advised protected load charts. Each of the measured parameters like load fat, operating radius, handle restrict,angle and extension of the crane increase, and so on will then even more be displayed in the operator’s cabin.

 WTZ-A100N Overload  Limiter ( LMI ) System

Technological Parameters

Data LOGGER

Info USB downloadable: developed-in USB interface, can help functioning information down load, can evaluation the historic information from any time interval. Via the evaluation of the record, the comprehensive position of website procedure can be restored. Ultra-large Potential: the gadget can assistance real load knowledge fifty,000 circular logging, higher ability than the regular 16000 document.

Knowledge Document Impression

Installation Circumstances

Certifications

Organization Information

Weite Technologies Co.,Ltd

Started in 2002, it is nationwide hi-tech organization located in HangZhou, China. It has been focusing on R&D and OEM manufacturing of lifting basic safety security devices these kinds of as Load Instant Indicator, Secure monitoring systems, overload limiter, Load mobile, Anemometers and so on.We continuously concentrate on guaranteeing lifting equipments run safely as long-time period pursuing goal. 

“The dependable Security Partner for Worldwide Prime 100 Crane Possessing Companies like Tat Hong, Asiagroup, Massive Crane and Fortune 500 corps” . Nowadays, WTAU items are commonly used in maritime business,electrical, chemical, metal, metallurgy, design, ports and other industries, and have been broad spreaded to in excess of thirty international locations and regions.

International Associates

FAQ

1) Is your organization well-reputated? How to demonstrate that?

It is a China Best 3 brand focusing on Crane Security Security Tools. We are also Protection Associates for Worldwide Prime a hundred Crane Possessing Firms like Tat Hong(best 9), Asiagroup(top 45), Massive Crane(best ninety four) and Leading five hundred businesses this kind of as ABB, Macgragor,TTS,CNOOC,and so on. Items are been offered to more than 30 nations and areas globally. 
 

two) How to assure the good quality?

The Product Guarantee for the whole item is 12 months. Any dilemma soon after set up, we will modify the new 1 for totally free.

3) How to put in the LMI?

English User Handbook(consist of all the details of every merchandise) will be provided for set up and difficulty shooting(refer to the pic underneath). Also free of charge Remote Instantaneous Technological assistance would be presented by our english engineers. Or we can ship our engineers to assist you domestically.

four) How a lot is your LMI system?

Deliver me the crane product, hook variety, working circumstances(Luffing Tower Functioning Situation, Pilling) and unique requirement and the like. Your speak to details is a have to.

5) How can I place order? 
A: You can get in touch with us by email about your get details, or spot purchase on line.

six) How can I spend you?

A: After you affirm our PI, we will ask for you to pay. T/T and Paypal, Western Union are the most common methods we are using. 

Relevant Goods

###

###

###

###

CZPT Torque Limiter Products

Whether you’re looking for a magnetic torque limiter or a permanent-magnet synchronous limiter, CZPT(r) has a torque limiter solution for you. In addition to these products, we also offer Roller-detent and Challenge torque limiters.

Over-torque limiters

During heavy duty high cycle operations, it’s critical to have the proper equipment for maintaining torque levels. Having the right torque limiters can protect your machine from damage and help to reduce the frequency of downtime and cost of repair.
Torque limiters work to prevent the buildup of rotational energy, which can cause mechanical overloads. The torque limiter system detects the overload and disconnects the drive from the driven components. When the torque level drops below the preset level, the device reengages.
Torque limiters are widely used in industrial and assembly line applications. They are used in manufacturing equipment such as industrial robots and printing and converting machines. They are also used in conveyors and woodworking machines.
There are many types of torque limiters available. The most common are mechanical and hydraulic. The mechanical torque limiters can be installed in a single point or multiple points in the machine. Hydraulic torque limiters are a compact option for accurate torque overload release. They also allow users to set a precise disengagement torque value.
Typically, these devices are adjustable with a single screw. For offset mounted systems, an external bearing may be required. Most quality torque limiters include a bearing between the base of the clutch and the output flange.
Mechanical torque limiters are available in a variety of sizes and designs. They can be used in virtually any application. They provide an integrated mechanical and electrical design.

Magnetic torque limiters

Using Magnetic Torque Limiters will increase the reliability and durability of your equipment. They also help prevent catastrophic failure, which is essential for preventing downtime. They are used in a wide range of applications, including printing and converting machines, woodworking machines, conveyors, and many more.
They are designed to disengage from the driven system when the torque load exceeds the design limit. This protects rotating equipment and machinery from torsional strain and other hazards. They are also designed to provide precise overload protection. Using a torque limiter can protect equipment through its entire life cycle. It may prevent a mechanism from failing or even prevent a workplace accident.
A torque limiter is typically packaged as a shaft coupling. It is also available in other forms, such as friction-plate couplings and magnetic particle couplings. It is also available in many different sizes. It is important to choose a torque limiter that is right for your needs. The design of the torque limiter must match the type of torque load generated.
They are used in a variety of applications, including speed and torque sensors, acceleration sensors, position sensors, and more. They also can be found in various counters, tachogenerators, scales, and measuring devices.
Magnetic torque limiters are lightweight, require no maintenance, and don’t suffer wear and fatigue. They also can be used at any temperature. They have a quick response time, and they can reduce the transmission of torsional vibrations.

Permanent-magnet synchronous torque limiters

Various types of torque limiters are available in the market. These include friction torque limiters, magnetic particle clutch torque limiters, and spring-loaded pawl-spring torque limiters. These devices are used to limit the torque transmitted from an input shaft to an output shaft. These devices reduce the force experienced by the drive train components and thus enhance the reliability of electromechanical actuators. They protect expensive components from damage and physical injury.
In a magnetic particle clutch torque limiter, a magnetic field is generated from current. This field is transmitted to an output shaft through a physical barrier or air gap between the magnetic field lines. Magnetic particles in the assembly lock into chains along the field lines. The torque generated is statically or dynamically set. The torque is proportional to the current passing through the windings.
Friction torque limiters are used in various applications such as robotics. These devices have a radial and axial design. They also utilize sensors to prevent overload. These devices are also used as shaft-to-shaft couplings. The torque density is good and the devices are easy to operate.
Permanent-magnet synchronous torque limiters are another type of torque limiters. This type uses twin discs with mated magnets on their faces. These devices are fast acting and provide quick response. They can also have backlash.
In a permanent-magnet synchronous torque limiter, the magnetic field is generated from an excitation source. This field then interacts with a PM field to generate torque.

Roller-detent torque limiters

Whether you’re working on a manufacturing or processing line, it’s important to be aware of the various types of torque limiters and how they work. They can protect your equipment from overload and damage, and prevent physical injury to personnel. These devices can also be used in industrial robots, assembly lines, printing and converting machines, and conveyors.
Torque limiters can be mechanical, pneumatic, or electronic. Some systems have a single-position device, while others have a flexible coupling model that allows small parallel offsets and angular misalignments. Some systems also offer random reset devices.
Torque limiters are designed to protect expensive components from overloaded conditions. Modern machines have a predictable motion and torque, but unexpected forces can exceed their design limits. They can also eliminate physical injury by isolating driving and driven equipment from each other when overload occurs.
Mechanical torque limiters are available in a wide range of sizes and are designed for use in virtually any application. They are also backlash-free and offer superior repeat accuracy. They are ideal for processing different materials, and are suitable for applications such as woodworking.
Electronic torque limiters are less expensive than mechanical devices, and offer a more reliable control mechanism. They can apply pressure to thrust flanges and control the volume of air in the air chamber. They are commonly used in sheet metal processing equipment, printing and converting machines, and industrial robots.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is a custom-designed component that is used to transfer torque and axial force between mating components. The component can be used as a slip clutch and as a force limiter.
The tolerance ring may be made from metal, such as nickel-copper, spring steel, carbon steel, or copper-beryllium. The material may be heat-treated to provide the desired hardness and durability. The tolerance ring is typically curved to facilitate assembly. The tolerance ring can also be manufactured as an annular band.
The tolerance ring includes a generally cylindrical body. The body may be formed with a slit down the side. The body may also be constructed with one or more rows of projections. A tolerance ring is typically located between the inner component and the outer component. The tolerance ring transfers torque between the inner and outer components.
A tolerance ring may have an apex radius of no less than 1.01 RB. The base radius is measured perpendicularly from the ring’s central axis to the outer surface of the apex.
A tolerance ring may be arranged in a centered or piloted configuration. A centered configuration requires grooves in the bearing housing. A piloted configuration uses a step instead of a groove.
In a two-layer tolerance ring configuration, the first layer may include a plurality of radially extending projections. The second layer may include a smooth, regular surface. The two layers may overlap in some locations. When the layers overlap, the second layer may act as a sleeve around the inner component. The second layer may also act as a diffuser for transmitted force.

Challenge torque limiters

Designed to optimize torque and speed in drive systems, the Challenge torque limiter is available in torque ranges of three to 1090 Nm. Using an array of spring loaded friction discs, Challenge torque limiters are capable of adjusting force to the tune of a small percentage of the total torque. Whether you need a pilot bored unit or a completely custom machined model, Challenge has the expertise and resources to ensure your requirements are met.
In fact, the company has the largest line of torque limiters in the world. These units are capable of supporting shaft diameters ranging from 9mm to 64mm. They are also able to provide reliable overload protection. Having a torque limiter mounted in your machine is the smartest decision you can make.
The company also offers a range of torque limiters that are specifically engineered to address the needs of industry sectors such as automotive, aerospace, and medical. Aside from torque limiters, the company also offers other product solutions such as servo motors, actuators and cylinders, and power transmission systems. The patented R+W torque limiter has a proprietary patented operational principle that can be adjusted to match the application and meet its intended use. They are also available in a variety of torque ranges, sizes, and capacities. They also offer a comprehensive warranty and service program. They have a plethora of applications in industrial robots, conveyor systems, assembly lines, and even printing and converting equipment.

editor by czh 2022-12-22