Tag Archives: hydraulic crane truck

China Professional CHINAMFG 10 Ton Hydraulic Telescopic Boom Truck Mounted Crane

Product Description

Product Description

 

PRODUCT DESCRIPTIONS
Super-above Truck-mounted crane 
A truck-mounted crane is grouped together as a means of transport. By the boom, lifting torque, frame, legs and other
parts. Crane left and right operation can be both positive and negative 360-degree rotation, can also be full rotation.
Compared special crane trucks with crane, with a high speed, climbing ability characteristics. Enables fast movements,
efficiency, energy-saving.With a flexible, easy to operate, efficient, safe, and reliable.
A truck-mounted crane is grouped together as a means of transport. By the boom, lifting torque, frame, legs and other parts.
Crane left and right operation can be both positive and negative 360-degree rotation, can also be full rotation. Compared
special crane trucks with crane, with a high speed, climbing ability characteristics. Enables fast movements, efficiency,
energy-saving.With a flexible, easy to operate, efficient, safe, and reliable.

TECHNICAL PARAMETERS

Item Unit References
Max Lifting Moment t*m 20
Max Lifting Capacity kg 10000
Boom length m 4.81~11.85
Max Lifting Height m 13.2
Derick range ° 0~75°
Outrigger span mm 2280~5580
Size(length×width×height) mm 5140×2430×3260

1.Throttle Control System

        Changing the form of the previous manipulation and throttle operation individually, the Realization of the bilateral
handle synchronous and driving throttle acceleration and deceleration automatically, due to the speed change steady,
it can easily carry out the lifting work.

2.End position automatic hook device

        Maximum savings in preparation time before and after the operation, to ensure that the customer’s vehicle could be in a
driving state in the shortest time and prevent crane damage accident caused by hoist swing to enhance the safety of driving.

3. Hoisting overwinter device

        If a user is negligent or unfamiliar with the operation of lifting hooks, the hoisting overwinter device will stop hook-raise
in time, to prevent the safety of personnel and property caused by the fracture of wire rope.

4.Slewing locking device

        Slewing locking device can ensure that the lifting arm does not sway because of the centrifugal force during the driving
and steering process of the vehicle,to avoid all kinds of accidents caused by swaying.

5.Torque limiter

        It can select torque limit overload protection device to prevent users because of  negligence or unfamiliar with the lifting
operation principle of overload operation, thereby causing the vehicle rollover and crane damage accidents.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Available-Spare Parts,Job Site Training
Warranty: 1year
Certification: GS, RoHS, CE, ISO9001
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

Can injection molded parts be customized or modified to meet unique industrial needs?

Yes, injection molded parts can be customized or modified to meet unique industrial needs. The injection molding process offers flexibility and versatility, allowing for the production of highly customized parts with specific design requirements. Here’s a detailed explanation of how injection molded parts can be customized or modified:

Design Customization:

The design of an injection molded part can be tailored to meet unique industrial needs. Design customization involves modifying the part’s geometry, features, and dimensions to achieve specific functional requirements. This can include adding or removing features, changing wall thicknesses, incorporating undercuts or threads, and optimizing the part for assembly or integration with other components. Computer-aided design (CAD) tools and engineering expertise are used to create custom designs that address the specific industrial needs.

Material Selection:

The choice of material for injection molded parts can be customized based on the unique industrial requirements. Different materials possess distinct properties, such as strength, stiffness, chemical resistance, and thermal stability. By selecting the most suitable material, the performance and functionality of the part can be optimized for the specific application. Material customization ensures that the injection molded part can withstand the environmental conditions, operational stresses, and chemical exposures associated with the industrial application.

Surface Finishes:

The surface finish of injection molded parts can be customized to meet specific industrial needs. Surface finishes can range from smooth and polished to textured or patterned, depending on the desired aesthetic appeal, functional requirements, or ease of grip. Custom surface finishes can enhance the part’s appearance, provide additional protection against wear or corrosion, or enable specific interactions with other components or equipment.

Color and Appearance:

Injection molded parts can be customized in terms of color and appearance. Colorants can be added to the material during the molding process to achieve specific shades or color combinations. This customization option is particularly useful when branding, product differentiation, or visual identification is required. Additionally, surface textures, patterns, or special effects can be incorporated into the mold design to create unique appearances or visual effects.

Secondary Operations:

Injection molded parts can undergo secondary operations to further customize or modify them according to unique industrial needs. These secondary operations can include post-molding processes such as machining, drilling, tapping, welding, heat treating, or applying coatings. These operations enable the addition of specific features or functionalities that may not be achievable through the injection molding process alone. Secondary operations provide flexibility for customization and allow for the integration of injection molded parts into complex assemblies or systems.

Tooling Modifications:

If modifications or adjustments are required for an existing injection molded part, the tooling can be modified or reconfigured to accommodate the changes. Tooling modifications can involve altering the mold design, cavity inserts, gating systems, or cooling channels. This allows for the production of modified parts without the need for creating an entirely new mold. Tooling modifications provide cost-effective options for customizing or adapting injection molded parts to meet evolving industrial needs.

Prototyping and Iterative Development:

Injection molding enables the rapid prototyping and iterative development of parts. By using 3D printing or soft tooling, prototype molds can be created to produce small quantities of custom parts for testing, validation, and refinement. This iterative development process allows for modifications and improvements to be made based on real-world feedback, ensuring that the final injection molded parts meet the unique industrial needs effectively.

Overall, injection molded parts can be customized or modified to meet unique industrial needs through design customization, material selection, surface finishes, color and appearance options, secondary operations, tooling modifications, and iterative development. The flexibility and versatility of the injection molding process make it a valuable manufacturing method for creating highly customized parts that address specific industrial requirements.

Can you describe the various post-molding processes, such as assembly or secondary operations, for injection molded parts?

Post-molding processes play a crucial role in the production of injection molded parts. These processes include assembly and secondary operations that are performed after the initial molding stage. Here’s a detailed explanation of the various post-molding processes for injection molded parts:

1. Assembly:

Assembly involves joining multiple injection molded parts together to create a finished product or sub-assembly. The assembly process can include various techniques such as mechanical fastening (screws, clips, or snaps), adhesive bonding, ultrasonic welding, heat staking, or solvent welding. Assembly ensures that the individual molded parts are securely combined to achieve the desired functionality and structural integrity of the final product.

2. Surface Finishing:

Surface finishing processes are performed to enhance the appearance, texture, and functionality of injection molded parts. Common surface finishing techniques include painting, printing (such as pad printing or screen printing), hot stamping, laser etching, or applying specialized coatings. These processes can add decorative features, branding elements, or improve the surface properties of the parts, such as scratch resistance or UV protection.

3. Machining or Trimming:

In some cases, injection molded parts may require additional machining or trimming to achieve the desired final dimensions or remove excess material. This can involve processes such as CNC milling, drilling, reaming, or turning. Machining or trimming is often necessary when tight tolerances, specific geometries, or critical functional features cannot be achieved solely through the injection molding process.

4. Welding or Joining:

Welding or joining processes are used to fuse or bond injection molded parts together. Common welding techniques for plastic parts include ultrasonic welding, hot plate welding, vibration welding, or laser welding. These processes create strong and reliable joints between the molded parts, ensuring structural integrity and functionality in the final product.

5. Insertion of Inserts:

Insertion involves placing metal or plastic inserts into the mold cavity before the injection molding process. These inserts can provide additional strength, reinforce threaded connections, or serve as mounting points for other components. Inserts can be placed manually or using automated equipment, and they become permanently embedded in the molded parts during the molding process.

6. Overmolding or Two-Shot Molding:

Overmolding or two-shot molding processes allow for the creation of injection molded parts with multiple layers or materials. In overmolding, a second material is molded over a pre-existing substrate, providing enhanced functionality, aesthetics, or grip. Two-shot molding involves injecting two different materials into different sections of the mold to create a single part with multiple colors or materials. These processes enable the integration of multiple materials or components into a single injection molded part.

7. Deflashing or Deburring:

Deflashing or deburring processes involve removing excess flash or burrs that may be present on the molded parts after the injection molding process. Flash refers to the excess material that extends beyond the parting line of the mold, while burrs are small protrusions or rough edges caused by the mold features. Deflashing or deburring ensures that the molded parts have smooth edges and surfaces, improving their appearance, functionality, and safety.

8. Inspection and Quality Control:

Inspection and quality control processes are performed to ensure that the injection molded parts meet the required specifications and quality standards. This can involve visual inspection, dimensional measurement, functional testing, or other specialized testing methods. Inspection and quality control processes help identify any defects, inconsistencies, or deviations that may require rework or rejection of the parts, ensuring that only high-quality parts are used in the final product or assembly.

9. Packaging and Labeling:

Once the post-molding processes are complete, the injection molded parts are typically packaged and labeled for storage, transportation, or distribution. Packaging can include individual part packaging, bulk packaging, or custom packaging based on specific requirements. Labeling may involve adding product identification, barcodes, or instructions for proper handling or usage.

These post-molding processes are vital in achieving the desired functionality, appearance, and quality of injection molded parts. They enable the integration of multiple components, surface finishing, dimensional accuracy, and assembly of the final products or sub-assemblies.

What industries and applications commonly utilize injection molded parts?

Injection molded parts find widespread use across various industries and applications due to their versatility, cost-effectiveness, and ability to meet specific design requirements. Here’s a detailed explanation of the industries and applications that commonly utilize injection molded parts:

1. Automotive Industry:

The automotive industry extensively relies on injection molded parts for both interior and exterior components. These parts include dashboards, door panels, bumpers, grilles, interior trim, seating components, electrical connectors, and various engine and transmission components. Injection molding enables the production of lightweight, durable, and aesthetically pleasing parts that meet the stringent requirements of the automotive industry.

2. Consumer Electronics:

Injection molded parts are prevalent in the consumer electronics industry. They are used in the manufacturing of components such as housings, buttons, bezels, connectors, and structural parts for smartphones, tablets, laptops, gaming consoles, televisions, cameras, and other electronic devices. Injection molding allows for the production of parts with precise dimensions, excellent surface finish, and the ability to integrate features like snap fits, hinges, and internal structures.

3. Medical and Healthcare:

The medical and healthcare industry extensively utilizes injection molded parts for a wide range of devices and equipment. These include components for medical devices, diagnostic equipment, surgical instruments, drug delivery systems, laboratory equipment, and disposable medical products. Injection molding offers the advantage of producing sterile, biocompatible, and precise parts with tight tolerances, ensuring safety and reliability in medical applications.

4. Packaging and Containers:

Injection molded parts are commonly used in the packaging and container industry. These parts include caps, closures, bottles, jars, tubs, trays, and various packaging components. Injection molding allows for the production of lightweight, durable, and visually appealing packaging solutions. The process enables the integration of features such as tamper-evident seals, hinges, and snap closures, contributing to the functionality and convenience of packaging products.

5. Aerospace and Defense:

The aerospace and defense industries utilize injection molded parts for a variety of applications. These include components for aircraft interiors, cockpit controls, avionics, missile systems, satellite components, and military equipment. Injection molding offers the advantage of producing lightweight, high-strength parts with complex geometries, meeting the stringent requirements of the aerospace and defense sectors.

6. Industrial Equipment:

Injection molded parts are widely used in industrial equipment for various applications. These include components for machinery, tools, pumps, valves, electrical enclosures, connectors, and fluid handling systems. Injection molding provides the ability to manufacture parts with excellent dimensional accuracy, durability, and resistance to chemicals, oils, and other harsh industrial environments.

7. Furniture and Appliances:

The furniture and appliance industries utilize injection molded parts for various components. These include handles, knobs, buttons, hinges, decorative elements, and structural parts for furniture, kitchen appliances, household appliances, and white goods. Injection molding enables the production of parts with aesthetic appeal, functional design, and the ability to withstand regular use and environmental conditions.

8. Toys and Recreational Products:

Injection molded parts are commonly found in the toy and recreational product industry. They are used in the manufacturing of plastic toys, games, puzzles, sporting goods, outdoor equipment, and playground components. Injection molding allows for the production of colorful, durable, and safe parts that meet the specific requirements of these products.

9. Electrical and Electronics:

Injection molded parts are widely used in the electrical and electronics industry. They are employed in the production of electrical connectors, switches, sockets, wiring harness components, enclosures, and other electrical and electronic devices. Injection molding offers the advantage of producing parts with excellent dimensional accuracy, electrical insulation properties, and the ability to integrate complex features.

10. Plumbing and Pipe Fittings:

The plumbing and pipe fittings industry relies on injection molded parts for various components. These include fittings, valves, connectors, couplings, and other plumbing system components. Injection molding provides the ability to manufacture parts with precise dimensions, chemical resistance, and robustness, ensuring leak-free connections and long-term performance.

In summary, injection molded parts are utilized in a wide range of industries and applications. The automotive, consumer electronics, medical and healthcare, packaging, aerospace and defense, industrial equipment, furniture and appliances, toys and recreational products, electrical and electronics, and plumbing industries commonly rely on injection molding for the production of high-quality, cost-effective, and functionally optimized parts.

China Professional CHINAMFG 10 Ton Hydraulic Telescopic Boom Truck Mounted Crane  China Professional CHINAMFG 10 Ton Hydraulic Telescopic Boom Truck Mounted Crane
editor by Dream 2024-05-03

China Hot selling CHINAMFG 10 Ton Hydraulic Telescopic Boom Truck Mounted Crane

Product Description

Product Description

 

PRODUCT DESCRIPTIONS
Super-above Truck-mounted crane 
A truck-mounted crane is grouped together as a means of transport. By the boom, lifting torque, frame, legs and other
parts. Crane left and right operation can be both positive and negative 360-degree rotation, can also be full rotation.
Compared special crane trucks with crane, with a high speed, climbing ability characteristics. Enables fast movements,
efficiency, energy-saving.With a flexible, easy to operate, efficient, safe, and reliable.
A truck-mounted crane is grouped together as a means of transport. By the boom, lifting torque, frame, legs and other parts.
Crane left and right operation can be both positive and negative 360-degree rotation, can also be full rotation. Compared
special crane trucks with crane, with a high speed, climbing ability characteristics. Enables fast movements, efficiency,
energy-saving.With a flexible, easy to operate, efficient, safe, and reliable.

TECHNICAL PARAMETERS

Item Unit References
Max Lifting Moment t*m 20
Max Lifting Capacity kg 10000
Boom length m 4.81~11.85
Max Lifting Height m 13.2
Derick range ° 0~75°
Outrigger span mm 2280~5580
Size(length×width×height) mm 5140×2430×3260

1.Throttle Control System

        Changing the form of the previous manipulation and throttle operation individually, the Realization of the bilateral
handle synchronous and driving throttle acceleration and deceleration automatically, due to the speed change steady,
it can easily carry out the lifting work.

2.End position automatic hook device

        Maximum savings in preparation time before and after the operation, to ensure that the customer’s vehicle could be in a
driving state in the shortest time and prevent crane damage accident caused by hoist swing to enhance the safety of driving.

3. Hoisting overwinter device

        If a user is negligent or unfamiliar with the operation of lifting hooks, the hoisting overwinter device will stop hook-raise
in time, to prevent the safety of personnel and property caused by the fracture of wire rope.

4.Slewing locking device

        Slewing locking device can ensure that the lifting arm does not sway because of the centrifugal force during the driving
and steering process of the vehicle,to avoid all kinds of accidents caused by swaying.

5.Torque limiter

        It can select torque limit overload protection device to prevent users because of  negligence or unfamiliar with the lifting
operation principle of overload operation, thereby causing the vehicle rollover and crane damage accidents.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Available-Spare Parts,Job Site Training
Warranty: 1year
Certification: GS, RoHS, CE, ISO9001
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

What factors influence the design and tooling of injection molded parts for specific applications?

Several factors play a crucial role in influencing the design and tooling of injection molded parts for specific applications. The following are key factors that need to be considered:

1. Functionality and Performance Requirements:

The intended functionality and performance requirements of the part heavily influence its design and tooling. Factors such as strength, durability, dimensional accuracy, chemical resistance, and temperature resistance are essential considerations. The part’s design must be optimized to meet these requirements while ensuring proper functionality and performance in its intended application.

2. Material Selection:

The choice of material for injection molding depends on the specific application and its requirements. Different materials have varying properties, such as strength, flexibility, heat resistance, chemical resistance, and electrical conductivity. The material selection influences the design and tooling considerations, as the part’s geometry and structure must be compatible with the selected material’s properties.

3. Part Complexity and Geometry:

The complexity and geometry of the part significantly impact its design and tooling. Complex parts with intricate features, undercuts, thin walls, or varying thicknesses may require specialized tooling and mold designs. The part’s geometry must be carefully considered to ensure proper mold filling, cooling, ejection, and dimensional stability during the injection molding process.

4. Manufacturing Cost and Efficiency:

The design and tooling of injection molded parts are also influenced by manufacturing cost and efficiency considerations. Design features that reduce material usage, minimize cycle time, and optimize the use of the injection molding machine can help lower production costs. Efficient tooling designs, such as multi-cavity molds or family molds, can increase productivity and reduce per-part costs.

5. Moldability and Mold Design:

The moldability of the part, including factors like draft angles, wall thickness, and gate location, affects the mold design. The part should be designed to facilitate proper flow of molten plastic during injection, ensure uniform cooling, and allow for easy part ejection. The tooling design, such as the number of cavities, gate design, and cooling system, is influenced by the part’s moldability requirements.

6. Regulatory and Industry Standards:

Specific applications, especially in industries like automotive, aerospace, and medical, may have regulatory and industry standards that influence the design and tooling considerations. Compliance with these standards regarding materials, dimensions, safety, and performance requirements is essential and may impact the design choices and tooling specifications.

7. Assembly and Integration:

If the injection molded part needs to be assembled or integrated with other components or systems, the design and tooling must consider the assembly process and requirements. Features such as snap fits, interlocking mechanisms, or specific mating surfacescan be incorporated into the part’s design to facilitate efficient assembly and integration.

8. Aesthetics and Branding:

In consumer products and certain industries, the aesthetic appearance and branding of the part may be crucial. Design considerations such as surface finish, texture, color, and the inclusion of logos or branding elements may be important factors that influence the design and tooling decisions.

Overall, the design and tooling of injection molded parts for specific applications are influenced by a combination of functional requirements, material considerations, part complexity, manufacturing cost and efficiency, moldability, regulatory standards, assembly requirements, and aesthetic factors. It is essential to carefully consider these factors to achieve optimal part design and successful injection molding production.

Can you describe the various post-molding processes, such as assembly or secondary operations, for injection molded parts?

Post-molding processes play a crucial role in the production of injection molded parts. These processes include assembly and secondary operations that are performed after the initial molding stage. Here’s a detailed explanation of the various post-molding processes for injection molded parts:

1. Assembly:

Assembly involves joining multiple injection molded parts together to create a finished product or sub-assembly. The assembly process can include various techniques such as mechanical fastening (screws, clips, or snaps), adhesive bonding, ultrasonic welding, heat staking, or solvent welding. Assembly ensures that the individual molded parts are securely combined to achieve the desired functionality and structural integrity of the final product.

2. Surface Finishing:

Surface finishing processes are performed to enhance the appearance, texture, and functionality of injection molded parts. Common surface finishing techniques include painting, printing (such as pad printing or screen printing), hot stamping, laser etching, or applying specialized coatings. These processes can add decorative features, branding elements, or improve the surface properties of the parts, such as scratch resistance or UV protection.

3. Machining or Trimming:

In some cases, injection molded parts may require additional machining or trimming to achieve the desired final dimensions or remove excess material. This can involve processes such as CNC milling, drilling, reaming, or turning. Machining or trimming is often necessary when tight tolerances, specific geometries, or critical functional features cannot be achieved solely through the injection molding process.

4. Welding or Joining:

Welding or joining processes are used to fuse or bond injection molded parts together. Common welding techniques for plastic parts include ultrasonic welding, hot plate welding, vibration welding, or laser welding. These processes create strong and reliable joints between the molded parts, ensuring structural integrity and functionality in the final product.

5. Insertion of Inserts:

Insertion involves placing metal or plastic inserts into the mold cavity before the injection molding process. These inserts can provide additional strength, reinforce threaded connections, or serve as mounting points for other components. Inserts can be placed manually or using automated equipment, and they become permanently embedded in the molded parts during the molding process.

6. Overmolding or Two-Shot Molding:

Overmolding or two-shot molding processes allow for the creation of injection molded parts with multiple layers or materials. In overmolding, a second material is molded over a pre-existing substrate, providing enhanced functionality, aesthetics, or grip. Two-shot molding involves injecting two different materials into different sections of the mold to create a single part with multiple colors or materials. These processes enable the integration of multiple materials or components into a single injection molded part.

7. Deflashing or Deburring:

Deflashing or deburring processes involve removing excess flash or burrs that may be present on the molded parts after the injection molding process. Flash refers to the excess material that extends beyond the parting line of the mold, while burrs are small protrusions or rough edges caused by the mold features. Deflashing or deburring ensures that the molded parts have smooth edges and surfaces, improving their appearance, functionality, and safety.

8. Inspection and Quality Control:

Inspection and quality control processes are performed to ensure that the injection molded parts meet the required specifications and quality standards. This can involve visual inspection, dimensional measurement, functional testing, or other specialized testing methods. Inspection and quality control processes help identify any defects, inconsistencies, or deviations that may require rework or rejection of the parts, ensuring that only high-quality parts are used in the final product or assembly.

9. Packaging and Labeling:

Once the post-molding processes are complete, the injection molded parts are typically packaged and labeled for storage, transportation, or distribution. Packaging can include individual part packaging, bulk packaging, or custom packaging based on specific requirements. Labeling may involve adding product identification, barcodes, or instructions for proper handling or usage.

These post-molding processes are vital in achieving the desired functionality, appearance, and quality of injection molded parts. They enable the integration of multiple components, surface finishing, dimensional accuracy, and assembly of the final products or sub-assemblies.

Are there different types of injection molded parts, such as automotive components or medical devices?

Yes, there are various types of injection molded parts that are specifically designed for different industries and applications. Injection molding is a versatile manufacturing process capable of producing complex and precise parts with high efficiency and repeatability. Here are some examples of different types of injection molded parts:

1. Automotive Components:

Injection molding plays a critical role in the automotive industry, where it is used to manufacture a wide range of components. Some common injection molded automotive parts include:

  • Interior components: Dashboard panels, door handles, trim pieces, instrument clusters, and center consoles.
  • Exterior components: Bumpers, grilles, body panels, mirror housings, and wheel covers.
  • Under-the-hood components: Engine covers, air intake manifolds, cooling system parts, and battery housings.
  • Electrical components: Connectors, switches, sensor housings, and wiring harnesses.
  • Seating components: Seat frames, headrests, armrests, and seatbelt components.

2. Medical Devices:

The medical industry relies on injection molding for the production of a wide range of medical devices and components. These parts often require high precision, biocompatibility, and sterilizability. Examples of injection molded medical devices include:

  • Syringes and injection pens
  • Implantable devices: Catheters, pacemaker components, orthopedic implants, and surgical instruments.
  • Diagnostic equipment: Test tubes, specimen containers, and laboratory consumables.
  • Disposable medical products: IV components, respiratory masks, blood collection tubes, and wound care products.

3. Consumer Products:

Injection molding is widely used in the production of consumer products due to its ability to mass-produce parts with high efficiency. Examples of injection molded consumer products include:

  • Household appliances: Television and audio equipment components, refrigerator parts, and vacuum cleaner components.
  • Electronics: Mobile phone cases, computer keyboard and mouse, camera components, and power adapters.
  • Toys and games: Action figures, building blocks, puzzles, and board game components.
  • Personal care products: Toothbrushes, razor handles, cosmetic containers, and hairdryer components.
  • Home improvement products: Light switch covers, door handles, power tool housings, and storage containers.

4. Packaging:

Injection molding is widely used in the packaging industry to produce a wide variety of plastic containers, caps, closures, and packaging components. Some examples include:

  • Bottles and containers for food, beverages, personal care products, and household chemicals.
  • Caps and closures for bottles and jars.
  • Thin-walled packaging for food products such as trays, cups, and lids.
  • Blister packs and clamshell packaging for retail products.
  • Packaging inserts and protective foam components.

5. Electronics and Electrical Components:

Injection molding is widely used in the electronics industry for the production of various components and enclosures. Examples include:

  • Connectors and housings for electrical and electronic devices.
  • Switches, buttons, and control panels.
  • PCB (Printed Circuit Board) components and enclosures.
  • LED (Light-Emitting Diode) components and light fixtures.
  • Power adapters and chargers.

These are just a few examples of the different types of injection molded parts. The versatility of injection molding allows for the production of parts in various industries, ranging from automotive and medical to consumer products, packaging, electronics, and more. The specific design requirements and performance characteristics of each part determine the choice of materials, tooling, and manufacturing processes for injection molding.

China Hot selling CHINAMFG 10 Ton Hydraulic Telescopic Boom Truck Mounted Crane  China Hot selling CHINAMFG 10 Ton Hydraulic Telescopic Boom Truck Mounted Crane
editor by CX 2023-12-28

China best torque limiter factory manufacturer & supplier 50 Ton Hydraulic Truck Crane Qy50K-II with 5 Sections Telescopic Boom with top quality & best price

China best torque limiter factory manufacturer & supplier 50 Ton Hydraulic Truck Crane Qy50K-II with 5 Sections Tel: +86~13083988828escopic Increase with top good quality & greatest price tag

We – EPG Team the greatest gearbox & motors , torque limiter couplings and gears factory in China with 5 distinct branches. For much more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

50 Ton Hydraulic Truck Crane Qy50k-II with 5 sections telescopic growth
Functions:
The innovative jib system adopts embedded block, plug-in increase head and intercontinental advanced U segment jib, which has superb lifting overall performance and secure and reliable lifting operate.
The distinctive stretch and retract strategy avoids the bend of the core pipe and cylinder and the break of the increase brought on by misoperation, improving the protection of the functions.
8 patent methods guarantee the smooth, substantial performance and energy conservation of the lifting, rotation, and luffing methods.
Undertake the new hydraulic motor with massive torque beginning position, ma ept the secondary lifting safer.
The torque limiter adopts colorful Lcd exhibit, realizing the intelligence of the failure diagnosis. The precision is ahead of the industry.
The humanity style helps make the taxi and management cab more roomy, and simple to function.
6 exclusive producing systems ensure the high high quality.

Dimension Device QY50K-II
General size mm 13750
All round width mm 2800
Overall peak mm 3520
Excess weight    
Overall fat in journey kg 41000
Front axle load kg 15000
Rear axle load kg 26000
Electrical power    
Motor model   WD615.334(domestic III)
Engine rated electricity kW/(r/min) 247/2200
Engine rated torque N.m/(r/min) 1350/1400
Travel    
Max. journey speed km/h 80
Min. turning diameter m 24
Min. ground clearance mm 291
Method angle ° 17
Departure angle ° eleven
Max. quality potential % 40
Fuel intake for 100km L forty five
Main functionality    
Max. rated complete lifting capability t fifty
Min. rated wor ept radius m three
Turning radius at turntable tail m 3.482
Max. lifting torque kN.m 1764
Base boom m eleven.three
Completely extended growth m forty two.seven
Totally extended boom+ jib m fifty seven.seven
Longitudinal outrigger span m 5.91
Lateral outrigger span m six.9
Wor ept speed    
Growth luffin100 Sequence the Rexnord Autogard a hundred Collection Torque Limiter is a standard objective torque overload gadget that supplies reduced value, dependable safety for industrial equiptment.g time s 88
Growth complete extension time s one hundred eighty
Max. swing speed r/min ≥2.
Max. speed of main winch (one rope) (no load) m/min ≥110
Max. speed of aux. winch (solitary rope) (no load) m/min ≥110

The use of unique gear manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our business and the shown alternative components contained herein are not sponsored, authorized, or made by the OEM.

China best torque limiter factory manufacturer & supplier 50 Ton Hydraulic Truck Crane Qy50K-II with 5 Sections Tel: +86~13083988828escopic Boom with leading quality & very best price tag

China best torque limiter factory manufacturer & supplier 50 Ton Hydraulic Truck Crane Qy50K-II with 5 Sections Tel: +86~13083988828escopic Growth with top quality & ideal cost

China best torque limiter factory manufacturer & supplier 50 Ton Hydraulic Truck Crane Qy50K-II with 5 Sections Tel: +86~13083988828escopic Boom with best quality & very best price tag

China best torque limiter factory manufacturer & supplier EPT MG Manufacturer Qy50K 50ton Hydraulic Truck Crane for Sale with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG Manufacturer Qy50K 50ton Hydraulic Truck Crane for Sale with top quality & best price

We – EPG Group the greatest gearbox & motors , torque limiter couplings and gears factory in China with 5 distinct branches. For much more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

EPT Maker Qy50k 50ton Hydraulic Truck Crane for sale 
&lsqbProduct Description&rbrack
Much more types for sale
The progressive jib method adopts embedded block&comma plug-in increase head and intercontinental sophisticated U area jib&comma which has superb lifting performance and protected and dependable lifting perform&period of time
The distinctive extend and retract technique avoids the bend of the main pipe and cylinder and the break of the boom caused by misoperation&comma strengthening the basic safety of the operations&period of time
8 patent strategies ensure the clean&comma high performance and energy conservation of the lifting&comma rotation&comma and luffing programs&interval
Adopt the new hydraulic motor with big torque commencing stage&comma ma ept the secondary lifting safer&time period
The torque limiter adopts colourful Liquid crystal display display&comma acknowledging the intelligence of the failure analysis&interval The precision is in advance of the sector&time period
The humanit200 Sequence The first Autogard Torque Limiter with a reliable layout that will disengage at a pre-set torque worth. This product has a substantial set up base that services a broad assortment of programs.y layout makes the taxi and handle taxi much more roomy&comma and straightforward to operate&period of time
Six unique production technologies guarantee the large top quality&period of time

&lsqbProduct Parameter&rbrack

Item   QY50K Device
Dimensions Overall length 13100 mm
Overall width 2750 mm
Overall peak 3350 mm
Weight Overall weight in a touring point out 38580 kg
Entrance axle load 12950 kg
Rear axle load 25630 kg
Power Motor model Euro lll Hangfa WD615&period334&solEuro ll hangfa WD615&period46  
Rated Engine Power 206&sol2200  266&sol2200 kW&sol&lparr&solmin&rpar
Motor rated torque 1100&sol1400  1460&sol1400 N&periodm&sol&lparr&solmin&rpar
Travel Max&periodtravel velocity 66        75 Km&solh
Min&time period turning diameter 24        24 mm
Min&interval floor clearance 285       285 mm
Technique angle 16        sixteen °
Departure angle 11        11 °
Max&period of time quality potential 27        forty six &percnt
Fuel use of 100km 42        42 L
Lifting functionality Max&period lifting potential fifty t
Min&period of time rated wor ept radius three m
Turning radius at swing desk tail 3482 m
Max&period of time lifting torque   kN&periodm
Simple growth lifting peak 1764 m
Entirely-extended growth lifting peak 823&period2 m
Totally-extended growth&furthermore luffing jib   m
Outrigger longitudinal length span 5&period65 m
Outrigger lateral distance span six&period6 m
Wor ept velocity Growth elevating time 88 s
Growth complete elevating time a hundred and eighty s
Max&period slewing velocity two r&solmin
Main winch max&interval speed&lparsingle line&rpar 85 m&solmin
Auxiliary winch max&period pace&lparsingle line&rpar eighty five m&solmin

&lsqbCompany Data&rbrack
EPT was born in 1943 as an arsenal workshop for the duration of the War In opposition to Japanese Aggression and has a historical past of 72 a long time&periodThe team was integrated in 1989&comma and has held its leading place in Chinese design equipment ept for 26 a long time&periodIf you want know more about us&comma you can also go to our world wide web website&colon http&colon&sol&solwww&periodxcmg&periodcom&solen-mena&sol&interval

In accordance to KHL’s Yellow Desk&comma EPT ranks No&period8 in the entire world design machinery ept in 2014&periodAccording to the rank of Top50 Summit of Entire world Development Equipment Industry&comma EPT ranks No&period5 in the planet&time period

At existing&comma EPT is a large condition-owned worldwide company with the most comprehensive range of goods and above 30&comma000 workers operating in China&comma The usa&comma Germany&comma Netherlands&comma Poland&comma India&comma Brazil and Uzbekistan&period

The aim of EPT is to become a top world-course enterprise with wonderful price creative imagination&time period
 
 

The use of unique gear manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our business and the shown replacement parts contained herein are not sponsored, accredited, or produced by the OEM.

China best torque limiter factory manufacturer & supplier EPT MG Manufacturer Qy50K 50ton Hydraulic Truck Crane for Sale with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG Manufacturer Qy50K 50ton Hydraulic Truck Crane for Sale with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG Manufacturer Qy50K 50ton Hydraulic Truck Crane for Sale with top quality & best price

China best torque limiter factory manufacturer & supplier Full Hydraulic Truck Crane with top quality & best price

China best torque limiter factory manufacturer & supplier Full Hydraulic Truck Crane  with top quality & best price

We – EPG Team the largest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

QY70K cell crane

one. The modern jib technique adopts embedded block, plug-in growth head and intercontinental advanced U segment jAt extremely low speeds techniques can create a massive sum of unnecessary torque. This torque can injury push method parts (Shafts, Gearboxes, Chain, Couplings…) in the arrival of a jam. A torque limiter will limit the torque to the established level and increase program ingredient daily life.ib, which has excellent lifting efficiency and safe and reputable lifting work.

two.The distinctive extend and retract technique avoids the bend of the core pipe and cylinder and the split of the growth induced by misoperation, strengthening the safety of the functions.

three.8 patent techniques ensure the smooth, high performance and energy conservation of the lifting, rotation, and luffing techniques.

4.The torque limiter adopts colorful Liquid crystal display show, noticing the intelligence of the failure diagnosis. The precision is forward of the market.

five. Adopt the new hydraulic motor with massive torque starting up stage, ma ept the secondary lifting safer.

six. The humanity design tends to make the taxi and management cab much more spacious, and simple to function.

seven.6 distinctive manufacturing technologies make sure the large quality.

8.The wor ept condition expands twice. Newly incorporate 5t counterweight.

Main Technical Specifications
Technical Data for Lifting Operation

Classificatory Item Device Parameter
Outline dimension Overall length mm 13500
Overall width mm 2800
Overall height mm 3510
Wheel base Axle 1, Axle 2 mm 1520
Axle 2, Axle 3 mm 3965
Axle 3, Axle 4 mm 1350
Mass Total mass in travel state kg 41000
Axle load Axle 1, Axle 2 kg 15000
Axle 3, Axle 4 kg 26000

 
 
 

Classificatory Item Device Parameter
Travel performance Max. travel speed km/h seventy five
Turning diameter Min. turning diameter m 24
Min. turning diameter at boom tip m 29.
Min. ground clearance mm 270
Approach angle (°) 16.5
Departure angle (°) 11.3
Braking distance (at speed of 30km/h) m ≤10
Max. grade-potential % 40
Fuel consumption for 100km L 42
Engine Engine rated output kW/(r/min.) 266/2208
Engine rated torque N.m/(r/min.) 1460/1400
Engine rated speed rpm. 2200

 
Main Technical Data for Lifting Operation 

Classificatory Item Unit Parameter
Lifting performance Max. total rated lifting capacity t 70
Min. rated working radius m 3
Turning radius at turntable tail m 3550
Max.  load moment Base boom kN.m 2303
Fully extended boom kN.m 1043
Fully extended boom + Jib kN.m 492.eight
Outrigger span Longitudinal m five.seventy five
Lateral m 6.9
Lifting height Base boom m 11.two
Fully extended boom m 42
Fully extended boom + Jib m 58
Working speed Boom elevating time Boom raising S seventy five
Boom telescopingtime Boom full extension/retracting S 150/100
Max. swing speed r/min two.
Outrigger telescoping
time
utrigger beam extending/
retracting synchronously 
S thirty/twenty
Outrigger jackextending/
retracting synchronously 
S 35/12
Hoist speed
(single line)
Main winch Full load m/min seventy five
No load m/min a hundred thirty
Aux. winch Full load m/min ninety eight
No load m/min 108

Note: All specifications on our web-site are subject to technical modifications without notice.

The use of first gear manufacturer’s (OEM) element numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our firm and the listed replacement elements contained herein are not sponsored, authorized, or manufactured by the OEM.

China best torque limiter factory manufacturer & supplier Full Hydraulic Truck Crane  with top quality & best price

China best torque limiter factory manufacturer & supplier Full Hydraulic Truck Crane  with top quality & best price

China best torque limiter factory manufacturer & supplier Full Hydraulic Truck Crane  with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG 50 Ton Hydraulic Truck Crane Qy50ka with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG 50 Ton Hydraulic Truck Crane Qy50ka with top quality & best price

We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 diverse branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

QY50KATruck Crane
1. Rated Loading Capacity: 50ton
two. Motor: WD615.334(domestic III)
3. Rated output: 247KW

The progressive jib method adopts embedded block, plug-in growth head and intercontinental innovative U section jib, which has outstanding lifting performance and protected and dependable lifting function.
The unique stretch and retract strategy avoids the bend of the core pipe and cylinder and the split of the growth induced by misoperation, enhancing the protection of the functions.
Eight patent methods ensure the easy, large effectiveness and energy conservation of the lifting, rotation, and luffing systems.
Adopt the neCritical drive components can fall short or fracture from just a single instant or motion. This incidence, called mechanical overload, is when a rotating part activities torques past what the method is made to manage. Any rotating operation can produce a good deal of torque and, if there is any variety of malfunction, all of that power can crack affected components like, but not restricted to, the couplings, the travel or motor shafts, and/or the gearing.w hydraulic motor with huge torque beginning stage, ma ept the secondary lifting safer.
The torque limiter adopts colorful Lcd display, noticing the intelligence of the failure prognosis. The precision is forward of the industry.
The humanity design and style helps make the cab and manage cab much more roomy, and effortless to run.
Six special producing systems make sure the high top quality.

Dimension Device QY50K-II
All round length mm 13750
Total width mm 2800
All round height mm 3520
Fat    
Overall fat in travel kg 41000
Entrance axle load kg 15000
Rear axle load kg 26000
Electricity    
Engine model   WD615.334(domestic III)
Motor rated energy kW/(r/min) 247/2200
Engine rated torque N.m/(r/min) 1350/1400
Vacation    
Max. vacation pace km/h eighty
Min. turning diameter m 24
Min. floor clearance mm 291
Technique angle ° 17
Departure angle ° 11
Max. grade ability % forty
Gasoline intake for 100km L 45
Major functionality    
Max. rated complete lifting capacity t 50
Min. rated wor ept radius m three
Turning radius at turntable tail m three.482
Max. lifting torque kN.m 1764
Foundation boom m 11.3
Completely prolonged boom m forty two.seven
Fully prolonged boom+ jib m fifty seven.7
Longitudinal outrigger span m five.ninety one
Lateral outrigger span m 6.9
Wor ept speed    
Growth luffing time s 88
Growth full extension time s one hundred eighty
Max. swing pace r/min ≥2.
Max. speed of major winch (single rope) (no load) m/min ≥110
Max. velocity of aux. winch (one rope) (no load) m/min ≥110

 

The use of first gear manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the detailed substitute components contained herein are not sponsored, authorized, or made by the OEM.

China best torque limiter factory manufacturer & supplier EPT MG 50 Ton Hydraulic Truck Crane Qy50ka with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG 50 Ton Hydraulic Truck Crane Qy50ka with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG 50 Ton Hydraulic Truck Crane Qy50ka with top quality & best price

China best torque limiter factory manufacturer & supplier EPT m 100 Ton Heavy Hydraulic Mobile Truck Crane with top quality & best price

China best torque limiter factory manufacturer & supplier EPT m 100 Ton Heavy Hydraulic Mobile Truck Crane  with top quality & best price

We – EPG Team the biggest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 diverse branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

EPT a hundred Ton Weighty Hydraulic Cell truck Crane (Qy100k-I)

Efficiency parameters of QY100K-I  truck crane

The revolutionary jib method adopts embedded block, plug-in increase head and intercontinental innovative U section jib, which has outstanding lifting efficiency and risk-free and dependable lifting work.
•The distinctive extend and retract technique avoids the bend of the main pipe and cylinder and the crack of the growth triggered by misoperation, improving the protection of the operations.
•Eight patent strategies make sure the sleek, substantial performance and strength conservation of the lifting, rotation, and luffing programs.
•The torque limiter adopts vibrant Liquid crystal display display, acknowledging the intelligence of the failure prognosis. The precision is forward of the business.
•Adopt the new hydraulic motor with large torque beginning stage, ma ept the secondary lifting safer.
•The humanity design and style tends to make the cab and management taxi far more spacious, and simple to work.
•Six unique production technologies make certain the high top quality.
•The wor ept situation expands 2 times. Newly include 5t counterweight.

Dimension Unit QY100K-I
Total size, width, top mm 15600×3000×3850
Wheel foundation mm 1420+2420+1800+1420+1505
Fat    
Overall bodyweight in vacation kg 54900   58000
Axle load    
Axle 1 kg 7500    7500
Axle 2 kg 7500    7500
Axle three kg 8300    10000
Axle 4 kg 12000    12500
Axle 5 kg 12000    12500
Axle 6 kg 7600       8000
Electricity    
Motor rated energy kW/(r/min) 360/1800 (306/1900)
Engine rated torque N.m/(r/min) 2200/1300 (2571/1200)
Motor rated speed r/min 1800 (1900)
Min. ground clearance mm 310
Journey    
Approach angle ° twenty
Departure angle ° 14
Bra ept distance (at 30km/h) m ≤10
Max. grade capability % 40
Min. turning diameter m 24
Fuel consumption for 100km L 70
Principal functionality
Max. rated total lifting capability m a hundred
Min. rated wor ept radius   three
Turning radius at turntable tail    
Counterweight mm 4200
Aux. winch mm 4590
Max. lifting torque   3450
Base increase kN.m 3450(4m×88t)
Entirely prolonged boom kN.m 1950(24m×7.1t)
Totally extended increase+ jib kN.m 1230(19.2m×6t)
Outrigger span (full extension)    
Longitudinal m seven.fifty six
Lateral m seven.6
Lifting peak    
Foundation growth m 13.5
Entirely prolonged increase m 50.nine
Fully extended growth+ jib m 70.four
Boom size m 13.five
Completely prolonged increase m 51
Totally extended boom+ jib m 51+eighteen.1+4
Wor ept velocity    
Jib placing angle ° ,15,thirty
Increase luffing time s seventy five
Increase    
Increase telescoping time    
Entire extension s one hundred sixty
Max. swing pace r/min 2
Outrigger extension/retraction time    
Outrigger beam in extension/retraction s 25/15
Outrigger jack in extension/retraction s 45/twenty five
Lifting speed (one rope, layer 4)    
Major winch m/min one zero five
Aux. winch m/min 104

Truck crane series types:
8 ton truck crane QY8B.five
twelve ton truck crane QY12B.5
twenty ton truck crane QY20G.five
twenty five ton truck crane QY25K5-I, QY25K-II
thirty ton truck crane QY30K5-I
35 ton truck crane QY35K5
50 ton truck crane QY50K-II
70 ton truck crane QY70K-I
100 ton truck crane QY100K-I

Tough-terrain Crane designs:
25 ton Rough-terrain Crane RT25(Jib stowed beneath growth)
25 ton Tough-terrain Crane RT25(Aspect-placed Auxiliary Growth)
35 ton Tough-terrain Crane RT35
40 ton Rough-terrain Crane RT40E
50 ton Rough-terrain Crane RT50
sixty ton Tough-terrain Crane RT60
70 ton Rough-terrain Crane RT70E
80 ton Tough-terrain Crane RT80
ninety ton Rough-terrain Crane RT90E
one hundred ton Tough-terrain Crane RT100

 

The use of unique tools manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our company and the listed substitution areas contained herein are not sponsoCritical push components can fall short or fracture from just a single instant or motion. This incidence, named mechanical overload, is when a rotating ingredient encounters torques beyond what the method is created to manage. Any rotating operation can produce a great deal of torque and, if there is any kind of malfunction, all of that drive can break affected parts such as, but not constrained to, the couplings, the travel or motor shafts, and/or the gearing.crimson, approved, or manufactured by the OEM.

China best torque limiter factory manufacturer & supplier EPT m 100 Ton Heavy Hydraulic Mobile Truck Crane  with top quality & best price

China best torque limiter factory manufacturer & supplier EPT m 100 Ton Heavy Hydraulic Mobile Truck Crane  with top quality & best price

China best torque limiter factory manufacturer & supplier EPT m 100 Ton Heavy Hydraulic Mobile Truck Crane  with top quality & best price

China best torque limiter factory manufacturer & supplier 20tons Hydraulic Mobile Truck Crane Qry20 with top quality & best price

China best torque limiter factory manufacturer & supplier 20tons Hydraulic Mobile Truck Crane Qry20 with top quality & best price

We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears factory in China with 5 diverse branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Chapter 2: Quick introduction of QRY20
RT20 rough terrain crane is a type of telescopic growth and swing type crane which travels with tire sort chassis. It is composed of the superstructure and undercarriage. The superstructure is the lifting part, composed of the telescopic increase, jib, main winch, aux. winch, luffing system, counterweight, swivel table, etc. The undercarriage is composed of the suspension and wal ept component. The superstructure and the undercarriage are linked by the slewing bearing.
Chapter 3: Main features of QRY20
one. Front-wheel steering, rear wheel steering, four wheel steering and crab steering, all wheel push, off-highway
efficiency, appropriate for off-highway vacation.
2. The axle adopts Meritor axle
3. The gearbox adopts the ept brand name.
4. Service brake adopts Double circuits air bra ept system Par ept brake adopts air bleed bellow bra ept method.
5. Entirely prolonged outriggers operation, with semi-extend outriggers operation, without outriggers operation and traveling with load procedure can be realized.
6. Suitable for narrow room vacation and functions modest turning radius robust maneuverability.
seven. Risk-free and reliable manage method, two seats or one seat can be optional, all-directional lifting operation,
  greatly increased the potential of the entrance lifting.
eight. The crane has great targeted traffic-capacity, dynamic efficiency and mobility, and is able to function in every single route and vacation whilst hoisting with no outriggers. The item is commonly utilized in heavy lifting functions, short distance transfer, slim-web site lifting operations for building websites, outside oilfields, warehouses, freight yards, logistics basses and other websites.
Chapter 4: Basic safety system of QRY20
 Safety system contains torque limiter, swing desk lock gadget, winch over-winding and in excess of-rest defend unit, outrigger lock unit, outrigger bidirectional hydraulic lock, rear axle steering lock and rear wheel return detector, crisis steering electricity device, gradienter, hydraulic technique overflow valve, harmony valve.
1) Torque limiter
 Detecting perform: Detect the angle of the increase instantly.
 Display function: Display operating details such as real load, managing radius, growth angle.
 Caution function: When the genuine load exceeds rated lifting load, torque limiter will give an alarm and quit the procedure.
two) Swing table lock system
  During the driving method, a plug device is used to hook up the swing table and the provider to maintain the steering parts (swing desk, increase) from swing induced by inertia.
3) Winch more than-winding defend device 
  When the load reaches a particular height,torque limiter will stop the slipping and indicating mild on the instrument panel will be on.
4) Winch above-relaxation safeguard gadget
  When only 3 laps of rope is remaining on the winch, torque limiter will end the falling and indicating mild on the
  instrumentation board will be on.
five) Outrigger lock device
  During the driving method, a plug gadget is employed. By plugging the outrigger, the system deeps it from extending.
six) Outrigger bidirectional hydraulic lock
  Outrigger bidirectional hydraulic lock is employed to insure the horizontal and vertical cylinder will not
  automatically retract when outriggers are in the extending condition .
7) Rear axle steering lock and rear wheel return detector
  During the driving process, only entrance axle steering is needed and the rear must be returned aligned. F820 Sequence The 820 Series has been designed employing the modular theory to accommodate higher-torque, higher- and lower-pace applications with the adaptability to accommodate a broad variety of torque configurations.or this cause a lock device is used and indicating light-weight on the instrumentation board displays the status.
eight) Emergency steering power system (unexpected emergency pump)
  If there is an emergency that the motor can not be started out, the crane can be dragged by other cars. The crisis pump is pushed by battery and supplies power to electricity cylinder.
 
Chapter 5: Technology parameter of QRY20
Table 5-1 QRY20 Main technological parameters table in journey point out

Group Items Models Parameters
Outline Dimension
Parameters
Overall size mm 12000
Overall width mm 2750
Overall peak mm 3650
Axle base mm 3600
Tread mm 2250
Weight Parameters Dead excess weight in travel point out Kg 24000
Axle load Front axle Kg 12650
Rear axle Kg 11350
Power Parameters Engine rated output Kw/(r/min) one hundred forty/2200
Engine rated torque N.m(r/min) 760/1400~1600
Journey Parameters Travel speed Max. travel velocity Km/h forty
Min. secure journey speed Km/h 9.sixty five
Turning radius Min. turning radius m three.23
Min. turning radius of increase head m 315
Min. floor clearance mm eighteen
Approach angle ° eighteen
Departure angle ° ≤8.five
Bra ept distance (at 30km/h) m fifty
Max. grade capability % 84
Max. outside noise for the duration of accelerating dB(A) 12650

 
Desk 5-2 QRY20 Main Specialized Parameters Table in Lifting State

Classification Items Device Parameters
Principal Performance Parameters Max. total rated lifting load t twenty
Min. rated wor ept radius m three
Max. load second Base growth KN.m 697
Fully-extended boom KN.m 552
Outrigger span Longitudinal m 5.83
Lateral m five.six
Lifting peak Base boom m 10
Fully-prolonged growth m 30.7
Boom length Base growth m nine.nine
Fully-extended growth m 31.2
Wor ept Pace Parameters Luffing time Boom elevating time s fifty five
Boom descending time s 36
Boom telescoping time Boom fully-extended time s eighty
Boom totally retracting time s 48
Max. swing/slewing velocity r/min 2.
Outriggers telescoping time Horizontal outriggers Extending synchronously s sixteen
Retracting synchronously s eleven
Vertical outriggers Extending synchronously s thirty
Retracting synchronously s 30
Hoisting velocity (wire rope is at the 4th layer) Main winch Full load m/min 140
No load m/min 110
Auxiliary winch Full load m/min a hundred and forty
No load m/min 90

 

The use of unique equipment manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our company and the shown substitution components contained herein are not sponsored, accredited, or produced by the OEM.

China best torque limiter factory manufacturer & supplier 20tons Hydraulic Mobile Truck Crane Qry20 with top quality & best price

China best torque limiter factory manufacturer & supplier 20tons Hydraulic Mobile Truck Crane Qry20 with top quality & best price

China best torque limiter factory manufacturer & supplier 20tons Hydraulic Mobile Truck Crane Qry20 with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG 130 Ton New Hydraulic Qy130K Truck Crane for Uzbekistan with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG 130 Ton New Hydraulic Qy130K Truck Crane for Uzbekistan with top quality & best price

We – EPG Team the most significant gearbox & motors , torque limiter couplings and gears factory in China with 5 various branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

EPT QY130K Truck Crane

one. Dimension: 14950*3000*3950mm
two. Max. Lifting load: 130ton
3. Rated electrical power: 390kW

1. Innovated boom method with inserted sliders, plug -in increase head of patented technological innovation and globe sophisticated shaped increase cross part helps make outstanding lifting potential, protected and trustworthy lifting operations.
two. Unique telescoping technologies stops occurrence of core pipe bending, oil cylinder bending and growth brea ept triggered by mis-opeartion, and as a result procedure safty is improved.
three. Eight patented technologies ensure the easy motion, large effectiveness &financial system of lifting, slewing and elevating mechanisms.
4. Load instant limiter with color Liquid crystal display realizes clever difficulty diagnostic, and its precision sales opportunities in the very same-class products in the market.
5. New hydraulic motor with greater authentic torque helps make greater safe 2nd-lifting operation.

Classificatory Item Device Parameter
Outline dimension Overall size mm 14950
Overall width mm 3000
Overall top mm 3950
Axle foundation Axle 1, Axle 2 mm 1420
Axle 2, Axle 3 mm 2420
Axle 3, Axle 4 mm 1875
Axle 4, Axle five mm 1350
Axle 5, Axle six mm 1400
Wheel foundation mm 2610/2307
Mass Total mass in travel state kg 62000
Axle load Axle 1, Axle two kg 8800/8800
Axle 3, Axle four kg 9200/12700
Axle 5, Axle six kg 12700/9800
Power Crane superstructure engine Rated energy kw/(r/min) 162/2100
Rated torque N.m/(r/min) 854/1400
RatRotating methods can have sufficient rotating vitality (inertia) to trigger substantial equipment hurt throughout a jam-up or technique crash. This inertia differs dependent on the RPM and rotating mass for each software. A high mass sluggish pace (RPM) could do more damage than a large velocity software in the course of a crash. A torque limiter is generally a mechanical fuse employed to shut down the device and enable the rotating vitality to dissipate without having triggering excessive damage.ed pace r/min 2100
Crane provider engine Rated energy kw/(r/min) 390/1800
Rated torque N.m/(r/min) 2400/1080
Rated speed r/min 2000
Travel efficiency Travel pace Max. journey speed km/h 70
Min. stable vacation pace km/h two.one
Min. turning diameter m 24
Min. ground clearance mm 275
Approach angle (°) 23
Departure angle (°) fourteen
Bra ept length (at 30km/h) m ≤ 10
Max. grade-capability % forty
Fuel consumption for 100km L 80

 

The use of first products manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our business and the shown substitute parts contained herein are not sponsored, accepted, or produced by the OEM.

China best torque limiter factory manufacturer & supplier EPT MG 130 Ton New Hydraulic Qy130K Truck Crane for Uzbekistan with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG 130 Ton New Hydraulic Qy130K Truck Crane for Uzbekistan with top quality & best price

China best torque limiter factory manufacturer & supplier EPT MG 130 Ton New Hydraulic Qy130K Truck Crane for Uzbekistan with top quality & best price

China best torque limiter factory manufacturer & supplier EPT m Qy30k5-I 30 Ton Hydraulic Mobile Truck Crane Price with top quality & best price

China best torque limiter factory manufacturer & supplier EPT m Qy30k5-I 30 Ton Hydraulic Mobile Truck Crane Price with top quality & best price

We – EPG Team the largest gearbox & motors , torque limiter couplings and gears factory in China with 5 distinct branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

 XCM QY30K5-I 30 ton hydraulic cell truck crane cost
 

Feature for XCM 30 tonTruck Crane QY30K5-I: 

The progressive jib technique adopts embedded block, plug-in increase head and octagon jib, which has exceptional lifting performance and safe and trustworthy lifting perform.
The exclusive extend and retract approach avoids the bend of the core pipe and cylinder and the split of the growth brought on by misoperation, improving the basic safety of the functions.
Eight patent techniques make certain the sleek, higher performance and vitality conservation of the lifting, rotation, and luffing systems.
The torque limiter adopts vibrant Lcd screen, realizing the intelligence of the failure prognosis. The precision is ahead of the sector.
Undertake the new hydraulic motor with big torque commencing point, ma ept the secondary lifting safer.
The humanity layout tends to make the cab and handle taxi more roomy, and effortless to function.
6 special manufacturing technologies ensure the higher quality.
Extend the lifting room and scope, significantly enhancing the lifting capability of the front component.

Parameter for EPT Truck Crane QY30K5-I: 

 

All Torque Limiters are computerized basic safety devices to avoid overload, offering reliable functions and adjustable functions The Torque Limiter with a sprocket is standardized, conserving you the trouble of machining and assembly Reliably protects your device by way of straightforward handling

Dimension Device QY30K5-I
Overall size mm 12570
General width mm 2500
All round height mm 3390
Weight    
Total excess weight in journey kg 32400
Entrance axle load kg 7000
Rear axle load kg 25400
Electrical power    
Motor design   SC8DK280Q3 WD615.329
Motor rated electricity kW/(r/min) 206/2200 213/2200
Engine rated torque N.m/(r/min) 1112/1400 1160/1400
Journey    
Max. travel speed km/h 80
Min. turning diameter m 22
Min. floor clearance mm 291
Approach angle ° 19
Departure angle ° 13
Max. quality ability % 40
Gas consumption for 100km L 40
Major functionality    
Max. rated overall lifting capability t 30
Min. rated wor ept radius mm 3000
Turning radius at turntable tail m 3.065
Max. lifting torque kN.m 1571
Foundation increase m 10.6
Fully extended growth m 40.4
Totally prolonged boom+ jib m 48.seven
Longitudinal outrigger span m 5.85
Lateral outrigger span m 6
Wor ept speed    
Growth luffing time s 68
Increase complete extension time s 150
Max. swing velocity r/min 2.five
Max. velocity of major winch (solitary rope) (no load) m/min 120
Max. velocity of aux. winch (one rope) (no load) m/min 120

 

The use of original tools manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our organization and the shown replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

China best torque limiter factory manufacturer & supplier EPT m Qy30k5-I 30 Ton Hydraulic Mobile Truck Crane Price with top quality & best price

China best torque limiter factory manufacturer & supplier EPT m Qy30k5-I 30 Ton Hydraulic Mobile Truck Crane Price with top quality & best price

China best torque limiter factory manufacturer & supplier EPT m Qy30k5-I 30 Ton Hydraulic Mobile Truck Crane Price with top quality & best price