Tag Archives: construction machinery

China factory Construction Machinery Overload Limiters and Overload Protector System for Gantry Cranes

Product Description

Product Description

WTZ A100N Overload limiter can be in the form of Chinese characters, graphics, characters and so on comprehensive display the various parameters in the process of work. 

As the main hook load, vice hook load, work boom Angle, length of boom, radius, etc.; 

Alarm function  Have sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system. 
When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing.
protection function  Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security. 

    Load Moment Indicator(safe load indicator or Crane computer) is a device which is installed on various sorts of cranes like mobile, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the lift is exceeding the safe operating range. In some cases, the device will physically lock out the machinery in circumstances it determines to be unsafe. 

    It controls the lifting equipment to function as per the manufacturer’s suggested safe load charts. Each of the measured parameters like load weight, working radius, control limit,angle and extension of the crane boom, etc will then further be displayed in the operator’s cabin.

    data logger Data USB downloadable: built-in USB interface, can support operating data download, can review the historical data from any time period. Through the analysis of the record, the complete status of site operation can be restored. Ultra-large Capacity: the device can support actual load data 50,000 circular logging, higher capacity than the standard 16000 record.

     

     WTZ-A100N Overload  Limiter ( LMI ) System

    Technical Parameters

    Data Record Image

    Installation Cases

     

    Certifications

     

    Company Profile

    Weite Technologies Co.,Ltd

    Founded in 2002, it is national hi-tech enterprise located in HangZhou, China. It has been focusing on R&D and OEM manufacturing of lifting safety protection devices such as Load Moment Indicator, Safe monitoring systems, overload limiter, Load cell, Anemometers etc.We continuously concentrate on ensuring lifting equipments run safely as long-term pursuing goal. 

    “The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong, Asiagroup, Big Crane and Fortune 500 corps” . Nowadays, WTAU products are widely used in marine industry,electrical, chemical, steel, metallurgy, construction, ports and other industries, and have been wide spreaded to over 70 countries and regions.

    Global Partners

     

    FAQ

    1) Is your company well-reputated? How to prove that?

    It is a China Top 3 brand focusing on Crane Safety Protection Equipment. We are also Safety Partners for Global Top 100 Crane Owning Companies like Tat Hong(top 9), Asiagroup(top 45), Big Crane(top 94) and Top 500 companies such as ABB, Macgragor,TTS,CNOOC,etc. Products are been sold to over 70 countries and regions globally. 
     

    2) How to assure the quality?

    The Product Warranty for the total item is 12 months. Any problem after installation, we will change the new 1 for free.

     

    3) How to install the LMI?

    English User Manual(include all the details of each item) will be offered for installation and trouble shooting. Also free Remote Instant Technical assistance would be offered by our english engineers. Or we can send our engineers to assist you locally.

     

    4) How much is your LMI system?

    Send me the crane model, hook number, working conditions(Luffing Tower Working Condition, Pilling) and special requirement and the like. Your contact info is a must.

     

    5) How can I place order? 
    A: You can contact us by email about your order details, or place order on line.

     

    6) How can I pay you?

    A: After you confirm our PI, we will request you to pay. T/T and Paypal, Western Union are the most usual ways we are using. 

    Related Products

     

     

    /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: Spare Parts
    Warranty: 1 Year
    Type: Gantry Crane & Portal Crane
    Samples:
    US$ 1000/Piece
    1 Piece(Min.Order)

    |

    Order Sample

    overload limiter
    Customization:
    Available

    |

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.







    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    How does the injection molding process contribute to the production of high-precision parts?

    The injection molding process is widely recognized for its ability to produce high-precision parts with consistent quality. Several factors contribute to the precision achieved through injection molding:

    1. Tooling and Mold Design:

    The design and construction of the injection mold play a crucial role in achieving high precision. The mold is typically made with precision machining techniques, ensuring accurate dimensions and tight tolerances. The mold design considers factors such as part shrinkage, cooling channels, gate location, and ejection mechanisms, all of which contribute to dimensional accuracy and part stability during the molding process.

    2. Material Control:

    Injection molding allows for precise control over the material used in the process. The molten plastic material is carefully measured and controlled, ensuring consistent material properties and reducing variations in the molded parts. This control over material parameters, such as melt temperature, viscosity, and fill rate, contributes to the production of high-precision parts with consistent dimensions and mechanical properties.

    3. Injection Process Control:

    The injection molding process involves injecting molten plastic into the mold cavity under high pressure. Advanced injection molding machines are equipped with precise control systems that regulate the injection speed, pressure, and time. These control systems ensure accurate and repeatable filling of the mold, minimizing variations in part dimensions and surface finish. The ability to finely tune and control these parameters contributes to the production of high-precision parts.

    4. Cooling and Solidification:

    Proper cooling and solidification of the injected plastic material are critical for achieving high precision. The cooling process is carefully controlled to ensure uniform cooling throughout the part and to minimize warping or distortion. Efficient cooling systems in the mold, such as cooling channels or conformal cooling, help maintain consistent temperatures and solidification rates, resulting in precise part dimensions and reduced internal stresses.

    5. Automation and Robotics:

    The use of automation and robotics in injection molding enhances precision and repeatability. Automated systems ensure consistent and precise handling of molds, inserts, and finished parts, reducing human errors and variations. Robots can perform tasks such as part removal, inspection, and assembly with high accuracy, contributing to the overall precision of the production process.

    6. Process Monitoring and Quality Control:

    Injection molding processes often incorporate advanced monitoring and quality control systems. These systems continuously monitor and analyze key process parameters, such as temperature, pressure, and cycle time, to detect any variations or deviations. Real-time feedback from these systems allows for adjustments and corrective actions, ensuring that the production remains within the desired tolerances and quality standards.

    7. Post-Processing and Finishing:

    After the injection molding process, post-processing and finishing techniques, such as trimming, deburring, and surface treatments, can further enhance the precision and aesthetics of the parts. These processes help remove any imperfections or excess material, ensuring that the final parts meet the specified dimensional and cosmetic requirements.

    Collectively, the combination of precise tooling and mold design, material control, injection process control, cooling and solidification techniques, automation and robotics, process monitoring, and post-processing contribute to the production of high-precision parts through the injection molding process. The ability to consistently achieve tight tolerances, accurate dimensions, and excellent surface finish makes injection molding a preferred choice for applications that demand high precision.

    Can you provide guidance on the selection of injection molded materials based on application requirements?

    Yes, I can provide guidance on the selection of injection molded materials based on application requirements. The choice of material for injection molding plays a critical role in determining the performance, durability, and functionality of the molded parts. Here’s a detailed explanation of the factors to consider and the guidance for selecting the appropriate material:

    1. Mechanical Properties:

    Consider the mechanical properties required for the application, such as strength, stiffness, impact resistance, and wear resistance. Different materials have varying mechanical characteristics, and selecting a material with suitable properties is crucial. For example, engineering thermoplastics like ABS, PC, or nylon offer high strength and impact resistance, while materials like PEEK or ULTEM provide exceptional mechanical performance at elevated temperatures.

    2. Chemical Resistance:

    If the part will be exposed to chemicals, consider the chemical resistance of the material. Some materials, like PVC or PTFE, exhibit excellent resistance to a wide range of chemicals, while others may be susceptible to degradation or swelling. Ensure that the selected material can withstand the specific chemicals it will encounter in the application environment.

    3. Thermal Properties:

    Evaluate the operating temperature range of the application and choose a material with suitable thermal properties. Materials like PPS, PEEK, or LCP offer excellent heat resistance, while others may have limited temperature capabilities. Consider factors such as the maximum temperature, thermal stability, coefficient of thermal expansion, and heat transfer requirements of the part.

    4. Electrical Properties:

    For electrical or electronic applications, consider the electrical properties of the material. Materials like PBT or PPS offer good electrical insulation properties, while others may have conductive or dissipative characteristics. Determine the required dielectric strength, electrical conductivity, surface resistivity, and other relevant electrical properties for the application.

    5. Environmental Conditions:

    Assess the environmental conditions the part will be exposed to, such as humidity, UV exposure, outdoor weathering, or extreme temperatures. Some materials, like ASA or HDPE, have excellent weatherability and UV resistance, while others may degrade or become brittle under harsh conditions. Choose a material that can withstand the specific environmental factors to ensure long-term performance and durability.

    6. Regulatory Compliance:

    Consider any regulatory requirements or industry standards that the material must meet. Certain applications, such as those in the medical or food industries, may require materials that are FDA-approved or comply with specific certifications. Ensure that the selected material meets the necessary regulatory and safety standards for the intended application.

    7. Cost Considerations:

    Evaluate the cost implications associated with the material selection. Different materials have varying costs, and the material choice should align with the project budget. Consider not only the material cost per unit but also factors like tooling expenses, production efficiency, and the overall lifecycle cost of the part.

    8. Material Availability and Processing:

    Check the availability of the material and consider its processability in injection molding. Ensure that the material is readily available from suppliers and suitable for the specific injection molding process parameters, such as melt flow rate, moldability, and compatibility with the chosen molding equipment.

    9. Material Testing and Validation:

    Perform material testing and validation to ensure that the selected material meets the required specifications and performance criteria. Conduct mechanical, thermal, chemical, and electrical tests to verify the material’s properties and behavior under application-specific conditions.

    Consider consulting with material suppliers, engineers, or experts in injection molding to get further guidance and recommendations based on the specific application requirements. They can provide valuable insights into material selection based on their expertise and knowledge of industry standards and best practices.

    By carefully considering these factors and guidance, you can select the most appropriate material for injection molding that meets the specific application requirements, ensuring optimal performance, durability, and functionality of the molded parts.

    Can you describe the range of materials that can be used for injection molding?

    Injection molding offers a wide range of materials that can be used to produce parts with diverse properties and characteristics. The choice of material depends on the specific requirements of the application, including mechanical properties, chemical resistance, thermal stability, transparency, and cost. Here’s a description of the range of materials commonly used for injection molding:

    1. Thermoplastics:

    Thermoplastics are the most commonly used materials in injection molding due to their versatility, ease of processing, and recyclability. Some commonly used thermoplastics include:

    • Polypropylene (PP): PP is a lightweight and flexible thermoplastic with excellent chemical resistance and low cost. It is widely used in automotive parts, packaging, consumer products, and medical devices.
    • Polyethylene (PE): PE is a versatile thermoplastic with excellent impact strength and chemical resistance. It is used in various applications, including packaging, pipes, automotive components, and toys.
    • Polystyrene (PS): PS is a rigid and transparent thermoplastic with good dimensional stability. It is commonly used in packaging, consumer goods, and disposable products.
    • Polycarbonate (PC): PC is a transparent and impact-resistant thermoplastic with high heat resistance. It finds applications in automotive parts, electronic components, and optical lenses.
    • Acrylonitrile Butadiene Styrene (ABS): ABS is a versatile thermoplastic with a good balance of strength, impact resistance, and heat resistance. It is commonly used in automotive parts, electronic enclosures, and consumer products.
    • Polyvinyl Chloride (PVC): PVC is a durable and flame-resistant thermoplastic with good chemical resistance. It is used in a wide range of applications, including construction, electrical insulation, and medical tubing.
    • Polyethylene Terephthalate (PET): PET is a strong and lightweight thermoplastic with excellent clarity and barrier properties. It is commonly used in packaging, beverage bottles, and textile fibers.

    2. Engineering Plastics:

    Engineering plastics offer enhanced mechanical properties, heat resistance, and dimensional stability compared to commodity thermoplastics. Some commonly used engineering plastics in injection molding include:

    • Polyamide (PA/Nylon): Nylon is a strong and durable engineering plastic with excellent wear resistance and low friction properties. It is used in automotive components, electrical connectors, and industrial applications.
    • Polycarbonate (PC): PC, mentioned earlier, is also considered an engineering plastic due to its exceptional impact resistance and high-temperature performance.
    • Polyoxymethylene (POM/Acetal): POM is a high-strength engineering plastic with low friction and excellent dimensional stability. It finds applications in gears, bearings, and precision mechanical components.
    • Polyphenylene Sulfide (PPS): PPS is a high-performance engineering plastic with excellent chemical resistance and thermal stability. It is used in electrical and electronic components, automotive parts, and industrial applications.
    • Polyetheretherketone (PEEK): PEEK is a high-performance engineering plastic with exceptional heat resistance, chemical resistance, and mechanical properties. It is commonly used in aerospace, medical, and industrial applications.

    3. Thermosetting Plastics:

    Thermosetting plastics undergo a chemical crosslinking process during molding, resulting in a rigid and heat-resistant material. Some commonly used thermosetting plastics in injection molding include:

    • Epoxy: Epoxy resins offer excellent chemical resistance and mechanical properties. They are commonly used in electrical components, adhesives, and coatings.
    • Phenolic: Phenolic resins are known for their excellent heat resistance and electrical insulation properties. They find applications in electrical switches, automotive parts, and consumer goods.
    • Urea-formaldehyde (UF) and Melamine-formaldehyde (MF): UF and MF resins are used for molding electrical components, kitchenware, and decorative laminates.

    4. Elastomers:

    Elastomers, also known as rubber-like materials, are used to produce flexible and elastic parts. They provide excellent resilience, durability, and sealing properties. Some commonly used elastomers in injection molding include:

    • Thermoplastic Elastomers (TPE): TPEs are a class of materials that combine the characteristics of rubber and plastic. They offer flexibility, good compression set, and ease of processing. TPEs find applications in automotive components, consumer products, and medical devices.
    • Silicone: Silicone elastomers provide excellent heat resistance, electrical insulation, and biocompatibility. They are commonly used in medical devices, automotive seals, and household products.
    • Styrene Butadiene Rubber (SBR): SBR is a synthetic elastomer with good abrasion resistance and low-temperature flexibility. It is used in tires, gaskets, and conveyor belts.
    • Ethylene Propylene Diene Monomer (EPDM): EPDM is a durable elastomer with excellent weather resistance and chemical resistance. It finds applications in automotive seals, weatherstripping, and roofing membranes.

    5. Composites:

    Injection molding can also be used to produce parts made of composite materials, which combine two or more different types of materials to achieve specific properties. Commonly used composite materials in injection molding include:

    • Glass-Fiber Reinforced Plastics (GFRP): GFRP combines glass fibers with thermoplastics or thermosetting resins to enhance mechanical strength, stiffness, and dimensional stability. It is used in automotive components, electrical enclosures, and sporting goods.
    • Carbon-Fiber Reinforced Plastics (CFRP): CFRP combines carbon fibers with thermosetting resins to produce parts with exceptional strength, stiffness, and lightweight properties. It is commonly used in aerospace, automotive, and high-performance sports equipment.
    • Metal-Filled Plastics: Metal-filled plastics incorporate metal particles or fibers into thermoplastics to achieve properties such as conductivity, electromagnetic shielding, or enhanced weight and feel. They are used in electrical connectors, automotive components, and consumer electronics.

    These are just a few examples of the materials used in injection molding. There are numerous other specialized materials available, each with its own unique properties, such as flame retardancy, low friction, chemical resistance, or specific certifications for medical or food-contact applications. The selection of the material depends on the desired performance, cost considerations, and regulatory requirements of the specific application.

    China factory Construction Machinery Overload Limiters and Overload Protector System for Gantry Cranes  China factory Construction Machinery Overload Limiters and Overload Protector System for Gantry Cranes
    editor by CX 2024-02-23

    in Vienna Austria sales price shop near me near me shop factory supplier Construction Machinery 16t Single Drum Vibratory Road Roller manufacturer best Cost Custom Cheap wholesaler

      in Vienna Austria  sales   price   shop   near me   near me shop   factory   supplier Construction Machinery 16t Single Drum Vibratory Road Roller  manufacturer   best   Cost   Custom   Cheap   wholesaler

    We are looking ahead to establishing effective enterprise associations with new clientele close to the globe in the long term. The solution effectively displays environmental protection and power saving. Our solution range contains all types of helical gear, spur gear, bevel equipment, equipment rack, worm equipment, sprockets,chains, bearings. Make contact with Man or woman:

    Mobile: 18019735352

    EPT Total EPT Single Drum Street Roller fourteen/16/18/20t

    Excellent price xs142j street roller 14 ton
    one. Drum width 2130mm
    two. Engine EPT 4EPT3.nine 110kw

    EPT Complete EPT One Drum Road Roller 14/sixteen/eighteen/20t

    Characteristic:
    XS142J vibratory compactor is a type of large duty self-propelled vibratory compactor. It can effectively compact a variety of soil layers and rock fill, and can be used to the constructions of contemporary freeways, airports, embankment fill, ports, dams, railways, mines, and so on.

    Overall performance function
    EPT roomy and brigEPT taxi features vast look at and ease and comfort.

    Straightforward operation
    EPT XiHu (West Lake) Dis.Hu (West Lake) Dis.nity instrument panel has a sensible layout, all the control buttons are very clear at a glance.
    Adopt the EPT with synchronizer, which is easy to operate.
    EPT EPT compactor drive axle has the perform of protecting against slipping, that includes sturdy traction.

    Reliable and resilient hydraulic program
    EPT stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd configuration incEPTs EPTed open equipment pump and motor. EPT optional configuration incEPTs closed hydraulic vibration program, EPTed piston pump, motor (16t, 18t). All those have a EPT services daily life, supplying stable start-oscillation and oscillation stop and higher compacting quality.

    Strength-preserving and environmental welcoming EPT
    ZheJiang Diesel Engine 114 sequence h2o-cooled motor has reduced noise, assembly the emission stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd of European I. EPT routine maintenance-totally free battery can be commenced simply and perform effortlessly in low temperature.

    High effective and dependable vibratory compacting program
    Distinctive drum framework attributes excellent rigidity and depth. EPT bearing adopts limited cylindrical bearing, that includes substantial rotary velocity restrict and strong bearing capacity. EPT remaining vibration chamber and rigEPT vibration chamber are symmetrical, keeping away from the polarization of the drum.
    EPT vibratory bearing can be lubricated when the compactor travels, which is basic and practical, making certain a very lower lubricating system failure price.
    Adopt the numerical handle blanking, numerical management plate rolling, numerical manage bender, and numerical management horizontal machining cEPTr to guarantee the precision of the EPT machining.

    Optional configuration
    EPT integral convex block drum, spEPT convex block drum, and the cab with air conditioning.
    Convenient routine maintenance
    EPT motor go over is straightforward to open, and the opening angle is massive, which make the maintenance portion accessible.
    EPT high positioned air consumption proEPTs the servicing interval of the air filter.

    Design Unit XS142J
    Operating fat kg 14000
    WeigEPT on front drum kg 7000
    Static linear strain N/cm 322
    Pace range km/h
    Velocity I 2.7
    Pace II 4.eight
    Speed III ten.5
    EPToretical gradeability % thirty
    Min. external turning radius mm 6800
    Steering angle deg plusmn30
    Oscillating angle deg plusmn11
    Vibration frequency Hz 28
    Nominal amplitude (substantial/low) mm 1.nine/.95
    Excitation force (large/reduced amplitude) kN 274/137
    Motor product ZheJiang Diesel Motor D4114
    Kind Drinking water cooled, pressurized Water cooled, pressurized
    Max. EPT kW ninety two@2200r/min
    Engine oil usage g/kW.h 230
    EPT oil tank potential L 170
    Gas tank capacity L one hundred eighty

      in Vienna Austria  sales   price   shop   near me   near me shop   factory   supplier Construction Machinery 16t Single Drum Vibratory Road Roller  manufacturer   best   Cost   Custom   Cheap   wholesaler

      in Vienna Austria  sales   price   shop   near me   near me shop   factory   supplier Construction Machinery 16t Single Drum Vibratory Road Roller  manufacturer   best   Cost   Custom   Cheap   wholesaler

    China best torque limiter factory manufacturer & supplier Chinese EPT 10 Ton Construction Machinery Truck Crane with top quality & best price

    China best torque limiter factory manufacturer & supplier Chinese  EPT 10 Ton Construction Machinery Truck Crane with top quality & best price

    We – EPG Group the greatest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 various branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

    Solution DESCRIPTIONS
    Truck-mounted crane 
    A truck-mounted crane is grouped together as a means of transport. By the boom, lifting torque, frame, legs and other
    pUPON OVERLOAD In the course of a torque overload, this kind of as in the situation of a jam protecting against rotation of the output customers, the pressure used by the DISC SPRING is defeat and the output users slip which stops a spike in torque from transmitting to the input component.arts. Crane remaining and right procedure can be each constructive and unfavorable 360-diploma rotation, can also be full rotation.
    Compared specific crane vehicles with crane, with a high pace, climbing potential characteristics. Permits fast movements,
    efficiency, power-preserving.With a flexible, simple to function, effective, secure, and reliable.
    A truck-mounted crane is grouped jointly as a means of transportation. By the boom, lifting torque, frame, legs and other elements.
    Crane still left and appropriate procedure can be both constructive and adverse 360-degree rotation, can also be complete rotation. Compared
    unique crane vans with crane, with a high pace, climbing ability characteristics. Enables fast movements, efficiency,
    vitality-saving.With a flexible, simple to operate, effective, protected, and trustworthy.

    Complex PARAMETERS

    Description Unit Parameter price
    Max Lifting Instant t*m 30
    Max Lifting Capability kg 12000
    Increase Duration m five.26~12.ninety one
    Max Lifting Peak m fourteen.7
    Derrick variety ° ~75°
    Outrigger span mm 2270~5270
    Measurement(length×width×height) mm 5598×2490×3306
    Crane Weight kg 4316

    1.Throttle Control Method

            Changing the form of the earlier manipulation and throttle operation separately, the Realization of the bilateral
    take care of synchronous and driving throttle acceleration and deceleration routinely, owing to the speed adjust constant,
    it can simply carry out the lifting operate.

    two.End placement computerized hook unit

            Maximum cost savings in planning time prior to and after the procedure, to make sure that the customer’s automobile could be in a
    driving state in the shortest time and prevent crane damage incident induced by hoist swing to increase the security of driving.

    3. Hoisting overwinter system

            If a user is negligent or unfamiliar with the procedure of lifting hooks, the hoisting overwinter system will stop hook-elevate
    in time, to stop the basic safety of personnel and property caused by the fracture of wire rope.

    four.Slewing loc ept gadget

            Slewing loc ept gadget can guarantee that the lifting arm does not sway because of the centrifugal drive for the duration of the driving
    and steering procedure of the vehicle,to stay away from all sorts of accidents brought on by swaying.

    five.Torque limiter

            It can choose torque limit overload protection system to avert customers simply because of  negligence or unfamiliar with the lifting
    operation basic principle of overload procedure, thereby creating the vehicle rollover and crane hurt accidents.

    The use of authentic equipment manufacturer’s (OEM) component numbers or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our firm and the listed substitution parts contained herein are not sponsored, approved, or produced by the OEM.

    China best torque limiter factory manufacturer & supplier Chinese  EPT 10 Ton Construction Machinery Truck Crane with top quality & best price

    China best torque limiter factory manufacturer & supplier Chinese  EPT 10 Ton Construction Machinery Truck Crane with top quality & best price

    China best torque limiter factory manufacturer & supplier Chinese  EPT 10 Ton Construction Machinery Truck Crane with top quality & best price

    China best torque limiter factory manufacturer & supplier EPT Good Price 1ton 24meter Construction Machinery with top quality & best price

    China best torque limiter factory manufacturer & supplier  EPT Good Price 1ton 24meter Construction Machinery with top quality & best price

    We – EPG Team the biggest gearbox & motors , torque limiter couplings and gears factory in China with 5 different branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

    HangZhou EPT Hoisting Machinery Manufacturing Co., Ltd. was founded in 1999 in HangZhou. Its principal development and manufacturing facility in HangZhou, gives foreseeable future-oriented remedies with chain methods and factors for a extensive range of apps.

    As the 2nd greatest chain company, our other hoisting machineries have a large cost gain. For hoisting, transferring, pulling, driving and conveying, our EPT lifting indicates, EPT hoist chains, EPT Chain block and EPT Electrical hoist are a promise of top quality, innovation and protection.

    Superior engineering, excellent abilities and higher quality items make HangZhou EPT Hoisting Equipment Production Co., Ltd. the perfect choice for you.

    wire rope electrical hoist

    Decription:

    one.Type CD1,MD1 wire-rope electric powered hoist is a type of little-lifting products

    two.it can be mounted on one beam overhead crane ,gantry cranes, jib kind CD

    3.electrical hoist as only 1 typical velocity which can satisfy regular software

    three.It is widely utilised in factories, mines, harbors, warehouses, cargo storage region and stores

    4.basically in boosting wor ept efficiency and strengthening wor ept conditions.

    electric powered hoist parameter:

    1.     Reducer

    3rd-course lifeless axel helica gear transmission framework is adopted, gear and gear axel are produced of heat taken care of alloy steelcase and situation go over with precise assembly and good seal are produced of top quality forged iron.The reducer is independent, so its easy to load and unload it.

    2.    Handle Box

      It has system with up an down stroke security of crack off limiter and can minimize off major circuit in an unexpected emergency,which ensures safe operation of electric powered block.Electric aspects are of prolonged support daily life and operational safety.

    3.       Steel Wire Rope

    It makes use of GB1102-74(6*37+1) hoist metal wire rope which is resilient in use.

    four.    Conical Motor

      The hoist motor makes use of conical motors of reasonably much better beginning torque to brake asynchronous motor and does not want extra arrester. The motor s load length factor is twenty five% the motor employs B frade and F quality insulation and its grade of safety isIP44/IP54.

    5.    Button Switch

      Its hand-operated, simple to take care of,and has two modes of wire procedure and cordless remote handle

    six. Hooks

    Load hooks are heat handled and fracture resistant. In circumstance of harmful overloading or abuse, the hook does not fracture but will gradually yield.

    7. Energy

    Working voltage 220-440V, 50/60Hz, 1-3 stage.

    Low voltage handle 36V is regular.

    Large effective power-conserving motor, asbestos free brake system. 2-pace motor accessible.
    Sturdy pole modify motors with cylindrical rotors and integrated safety brakes.

    8. Limit Swap

    Restrict swap products fitted at both best & bottom ends, swap off electrical power instantly to avoid load chain from operating out.

    nine. Pushbutton Swith

    Pushbutton swith is rain-evidence plastic for extreme effect and corrosive environment resistance and mechanically interlocked.

    10. Hoisting Equipment:

    Ligh tweight equipment units with silent running flat bevelled gears supply the torque essential.

    Type Loading ability Lifting peak Lifting speed Travelling speed Power offer
    Solitary speed Twin pace
    Ton m m/min m/min V-HZ-Phase
    CD1/MD1 .25 3~9 8 0.8/8 twenty 220~440V-fifty/60HZ-3phase
    .five 6~12 20/30
    one 6~thirty
    2 6~thirty
    3 six~thirty
    5 6~30
    ten 9~thirty seven .7/seven
    16 9~thirty three.five .35/3.5 18
      nine~36 4.two .42/4.2  
    20 nine~24 3.3 .33/3.three 14
    9~30 four.2 .42/4.two
    32 9~24 three .3/3 16
    Above parameter just for your reference,our hoist can be custom-made style Max.80ton base on your requires.

    Make sure you will not hesitate to get in touch with to us!
    MoOther torque limiters are not made to run in constant slip environments, and when the torque limit is approached – for illustration in the circumstance of an overload – the output of the driving aspect should be decreased right after a momentary slip issue – or it should then be decoupled from the driven gadget right up until the overload is corrected. Seek advice from the factory for additional info on your specific application.bile Phone Quantity/ 24hous hotline: 0086~13083988828 13858117778931230863 
    We sincerely hope to build a cooperative and mutual useful business partnership with you!

    Design Equipment
    Electric powered Hoist
    electric powered winch
    winch
    Construction Equipment
    Lifting Equipment
    energy winch
    Overhead Crane
    Wire Rope Hoist
    Development Machine
    Gantry Crane
    Electric powered Wire Rope Hoist
    Electric powered Chain Hoist
    Design Hoist
     

    The use of first gear manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our organization and the outlined substitution elements contained herein are not sponsored, accepted, or made by the OEM.

    China best torque limiter factory manufacturer & supplier  EPT Good Price 1ton 24meter Construction Machinery with top quality & best price

    China best torque limiter factory manufacturer & supplier  EPT Good Price 1ton 24meter Construction Machinery with top quality & best price

    China best torque limiter factory manufacturer & supplier  EPT Good Price 1ton 24meter Construction Machinery with top quality & best price

    China best torque limiter factory manufacturer & supplier Construction Machinery Hydraulic Truck Crane Qy30K5-I with top quality & best price

    China best torque limiter factory manufacturer & supplier Construction Machinery Hydraulic Truck Crane Qy30K5-I with top quality & best price

    We – EPG Group the greatest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 distinct branches. For much more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

    Design Equipment Hydraulic Truck Crane qy30k5-I

    Welcome to Hydraulic Truck Crane QY30K5-I!
    We are in a position to provide the professional provider and high high quality product.
    Loo ept ept to honest cooperation with you.

    Product Description

    • The modern jib program adopts embedded block, plug-in growth head and octagon jib, which has outstanding lifting efficiency and risk-free and reliable lifting operate.
    • The exclusive extend and retract technique avoids the bend of the core pipe and cylinder and the split of the growth caused by misoperation, improving the basic safety of the operations.
    • Eight patent techniques make certain the sleek, high efficiency and energy conservation of the lifting, rotation, and luffing methods.
    • The torque limiter adopts colorful Lcd screen, noticing the intelligence of the failure prognosis. The precision is forward of the business.
    • Adopt the new hydraulic motor with massive torque beginning level, ma ept the secondary lifting safer.
    • The humanity design tends to make the cab and handle cab far more spacious, and easy to function.
    • 6 exclusive production systems make sure the large good quality.
    • Prolong the lifting area and scope, significantly strengthening the lifting capability of the entrance component.

    Solution Specification

    Dimension Device QY30K5-I
    General size mm 12070
    General width mm 2500
    Total peak mm 3390
    Fat    
    Complete bodyweight in vacation kg 32400
    Front axle load kg 7600
    Rear axle load kg 24800
    Electricity    
    Motor design   SC8K28Q3/WD615.329
    Engine rated electricity kW/(r/min) 206/2200   213/2200
    Motor rated torque N.m(r/min) 1160/1400  1112/1400
    Journey    
    Max. travel velocity km/h 80
    Min. turning diameter m 22
    Min. ground clearance mm 291
    Method angle ° 19
    Departure angle ° 13
    Max. quality ability % forty
    Gas usage for 100km L forty
    Main efficiency    
    Max. rated tA torque limiter guards mechanical tools, or its operate, from injury by mechanical overload. A torque limiter could limit the torque by slipping a friction plate clutch or disconnect the load completely. The action of a torque limiter is valuable to limit any hurt to the equipment or product due to mechanical failures or product jams in the device. Torque limiters are usually put in on the output aspect of equipment reducers to protect the gear set. See more at Design and style Planet Movement Management Suggestions Protecting In opposition to Mechanical Overload Hurt.otal lifting capacity t thirty
    Min. rated wor ept radius m three
    Turning radius at turntable tail m 3.065
    Max. lifting torque KN.m 1571
    Foundation increase m ten.6
    Completely prolonged increase m 40.4
    Fully prolonged growth+jib m forty eight.7
    Longitudinal outrigger span m 5.eighty five
    Lateral outrigger span m six
    Wor ept speed    
    Increase luffing time s 68
    Boom entire extension time s one hundred fifty
    Max. swing velocity r/min 2.5
    Major winch single-pump/dual-pump converging (one rope) m/min one hundred twenty
    Auxiliary winch with full load/no load (solitary line) m/min 120

    Our Business:
         China Truck  Global Minimal was founded in 2011,located in HangZhou,China.We target on vans,construction equipment and all the areas exporting.Our merchandise are exported to more than 100 countries and regions,this kind of us South The united states,Middle East,Europe and Asia.Our yearly income sum is about twenty,000,000 dollars.

    Workshop:

    Get in touch with Details:
    China Truck Global Constrained
    Handle:eighth Ground, Xihu (West Lake) Dis.g Constructing, No. ten West HangZhou Rd, HangZhou
    Tel: +86~13083988828:86~571-8822571/88220973-87367577
    Mob:86~13083988828 1385811777886~13083988828 1385811777861927(Mr Jacky)
     

    The use of unique gear manufacturer’s (OEM) element numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our firm and the outlined substitute areas contained herein are not sponsored, authorized, or created by the OEM.

    China best torque limiter factory manufacturer & supplier Construction Machinery Hydraulic Truck Crane Qy30K5-I with top quality & best price

    China best torque limiter factory manufacturer & supplier Construction Machinery Hydraulic Truck Crane Qy30K5-I with top quality & best price

    China best torque limiter factory manufacturer & supplier Construction Machinery Hydraulic Truck Crane Qy30K5-I with top quality & best price

    China best torque limiter factory manufacturer & supplier Hydraulic Machinery 70ton Truck Crane for Construction Qy70K with top quality & best price

    China best torque limiter factory manufacturer & supplier Hydraulic Machinery 70ton Truck Crane for Construction Qy70K with top quality & best price

    We – EPGA torque limiter protects mechanical tools, or its function, from hurt by mechanical overload. A torque limiter may limit the torque by slipping a friction plate clutch or disconnect the load totally. The motion of a torque limiter is beneficial to limit any injury to the device or product due to mechanical failures or solution jams in the machine. Torque limiters are normally installed on the output aspect of equipment reducers to protect the gear established. See far more at Design World Movement Handle Ideas Protecting Towards Mechanical Overload Harm. Group the largest gearbox & motors , torque limiter couplings and gears factory in China with 5 distinct branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

    70tons Hydraulic Truck Crane 

    > The progressive jib system adopts embedded block, plug-in increase head and intercontinental sophisticated U section jib, which has excellent lifting functionality and protected and dependable lifting function.
    >The exclusive extend and retract technique avoids the bend of the main pipe and cylinder and the crack of the boom caused by misoperation, improving the basic safety of the operations.
    >Eight patent methods make certain the smooth, large effectiveness and vitality conservation of the lifting, rotation, and luffing techniques.
    > Undertake the new hydraulic motor with massive torque starting up level, ma ept the secondary lifting safer.
    >The torque limiter adopts vibrant Lcd screen, realizing the intelligence of the failure analysis. The precision is forward of the business.
    >The humanity layout tends to make the cab and manage cab more spacious, and simple to work.
    >Six special production systems make certain the large top quality. 

    PARAMETERS

      Item QY70K-I  parameter Unit
    Dimensions Total length 13930 mm
    Total  width 2800 mm
    Total  height 3575 mm
    Weight procedure in journey state  43000(not incorporated 1t auxiliary counterweight) Kg
    Entrance axle load    17000 Kg
    Rear axle load 26000 Kg
    Power Engine design Euro III hangfa WD615.338  
    Engine rated output 276/2200 Kw(r/min)
    Engine rated torque 1500/1400 N.m(r/min)
    Travel Max.journey velocity eighty Km/h
    Max. turning diameter 24 mm
    Max. floor clearance 327 mm
    Approach angle 19/eighteen .
    Departure angle eleven .
    Max. grade capability 40 %
    Gas consumption of 100km forty five L
    Lifting  performance Max. overall rated lifting load 50 t
    Min. rated wor ept radius 3000 m
    Turning radius at swing desk tail 3.55 mm
    Max. load moment 2303  
    Base boom 11.six Kn.m
    Totally-extended main boom  44.5 m
    Totally-extended principal growth+ luffing jib fifty nine.five m
    Outrigger longitudinal span 6.one m
    Outrigger lateral span 7.3 m
    Wor ept speed Boom  luffing  time sixty s
    Boom  full elevating  time ≤150 s
    Max. slewing velocity ≥2. r/min
    Main hoist  max. pace(solitary rope) ≥130 m/min
    Auxiliary hoist max. pace(single  rope ) ≥180 m/min

     

     

    The use of original products manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our firm and the shown substitution components contained herein are not sponsored, approved, or made by the OEM.

    China best torque limiter factory manufacturer & supplier Hydraulic Machinery 70ton Truck Crane for Construction Qy70K with top quality & best price

    China best torque limiter factory manufacturer & supplier Hydraulic Machinery 70ton Truck Crane for Construction Qy70K with top quality & best price

    China best torque limiter factory manufacturer & supplier Hydraulic Machinery 70ton Truck Crane for Construction Qy70K with top quality & best price

    Cheap made in China – replacement parts – in Sendai Japan EPT Good Price 2ton 10meter Construction Machinery with top quality

      Cheap  made in China - replacement parts -  in Sendai Japan  EPT Good Price 2ton 10meter Construction Machinery with top quality

    We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears factory in China with 5 different branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

    HangZhou EPT Hoisting Machinery Manufacturing Co., Ltd. was started in 1999 in HangZhou. Its principal growth and manufacturing facility in HangZhou, gives potential-oriented remedies with chain techniques and factors for a vast range of applications.

    As the 2nd biggest chain maker, our other hoisting machineries have a enormous price edge. For hoisting, shifting, pulling, driving and conveying, our EPT lifting signifies, EPT hoist chains, EPT Chain block and EPT Electrical hoist are a guarantee of high quality, innovation and protection.

    Sophisticated technologies, exceptional skills and large quality merchandise make HangZhou EPT Hoisting Equipment Manufacturing Co., Ltd. the best option for you.

    wire rope electrical hoist

    Decription:

    one.Sort CD1,MD1 wire-rope electric hoist is a kind of modest-lifting tools

    2.it can be mounted on one beam overhead crane ,gantry cranes, jib type CD

    3.electrical hoist as only 1 normal pace which can satisfy normal software

    3.It is extensively used in factories, mines, harbors, warehouses, cargo storage spot and outlets

    four.in essence in boosting wor ept efficiency and improving wor ept situations.

    electric powered hoist parameter:

    one.     Reducer

    3rd-course dead axel helica equipment transmission structure is adopted, gear and gear axel are manufactured of warmth handled alloy steelcase and scenario go over with precise assembly and good seal are created of high quality cast iron.The reducer is impartial, so its straightforward to load and unload it.

    2.    Management Box

      It has system with up an down stroke defense of crack off limiter and can minimize off primary circuit in an emergency,which ensures protected procedure of electric block.Electric powered components are of lengthy provider daily life and operational safety.

    3.       Steel Wire Rope

    It makes use of GB1102-seventy four(6*37+1) hoist steel wire rope which is durable in use.

    four.    Conical Motor

      The hoist motor makes use of conical motors of relatively more robust beginning torque to brake asynchronous motor and does not need added arrester. The motor s load length aspect is twenty five% the motor utilizes B frade and F quality insulation and its quality of protection isIP44/IP54.

    5.    Button Change

      Its hand-operated, effortless to take care of,and has two modes of twine procedure and cordless remote management

    six. Hooks

    Load hooks are heat handled and fracture resistant. In circumstance of unsafe overloading or abuse, the hook does not fracture but will slowly yield.

    seven. Electricity

    Running voltage 220-440V, 50/60Hz, 1-3 stage.

    Reduced voltage management 36V is regular.

    High efficient energy-preserving motor, asbestos totally free brake technique. 2-velocity motor available.
    Durable pole change motors with cylindrical rotors and integrated safety brakes.

    8. Restrict Change

    Restrict swThe device does not disengage in the function of an overload. It proceeds to slip until finally the source of the torque overload is cleared, or the machine is shut down.itch units fitted at equally best & base ends, switch off electricity automatically to prevent load chain from operating out.

    nine. Pushbutton Swith

    Pushbutton swith is rain-evidence plastic for significant influence and corrosive ambiance resistance and mechanically interlocked.

    ten. Hoisting Equipment:

    Ligh tweight gear models with silent working flat bevelled gears provide the torque necessary.

    Type Loading ability Lifting top Lifting pace Travelling speed Power supply
    Single pace Twin pace
    Ton m m/min m/min V-HZ-Stage
    CD1/MD1 .25 3~9 8 0.8/8 20 220~440V-fifty/60HZ-3phase
    .5 6~12 20/30
    one 6~thirty
    2 six~30
    3 6~thirty
    5 6~30
    ten 9~thirty 7 .7/seven
    16 9~30 3.5 .35/3.five eighteen
      nine~36 4.two .42/4.2  
    20 nine~24 three.3 .33/3.3 14
    nine~30 4.2 .42/4.two
    32 nine~24 three .3/3 sixteen
    Above parameter just for your reference,our hoist can be custom-made design Max.80ton base on your requires.

    Please don’t wait to get in touch with to us!
    Mobile Mobile phone Quantity/ 24hous hotline: 0086~13083988828 13858117778931230863 
    We sincerely hope to build a cooperative and mutual useful enterprise relationship with you!

    Development Tools
    Electric Hoist
    electrical winch
    winch
    Development Machinery
    Lifting Tools
    energy winch
    Overhead Crane
    Wire Rope Hoist
    Development Machine
    Gantry Crane
    Electric powered Wire Rope Hoist
    Electric powered Chain Hoist
    Development Hoist
     

    The use of original products manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the outlined substitution elements contained herein are not sponsored, accepted, or produced by the OEM.

      Cheap  made in China - replacement parts -  in Sendai Japan  EPT Good Price 2ton 10meter Construction Machinery with top quality

      Cheap  made in China - replacement parts -  in Sendai Japan  EPT Good Price 2ton 10meter Construction Machinery with top quality

      Cheap  made in China - replacement parts -  in Sendai Japan  EPT Good Price 2ton 10meter Construction Machinery with top quality

    shop made in China – replacement parts – in Kananga Democratic Republic of the Congo EPT Good Price 2ton 30meter Construction Machinery with top quality

      shop  made in China - replacement parts -  in Kananga Democratic Republic of the Congo  EPT Good Price 2ton 30meter Construction Machinery with top quality

    We – EPG Group the largest gearbox & motors , torque limiter couplings and gears factory in China with 5 diverse branches. For a lot more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

    HangZhou EPT Hoisting Machinery Manufacturing Co., Ltd. was launched in 1999 in HangZhou. Its main growth and production facility in HangZhou, provides foreseeable future-oriented solutions with chain methods and components for a vast range of purposes.

    As the 2nd largest chain maker, our other hoisting machineries have a huge cost edge. For hoisting, relocating, pulling, driving and conveying, our EPT lifting signifies, EPT hoist chains, EPT Chain block and EPT Electrical hoist are a promise of quality, innovation and basic safety.

    Innovative technology, superb talents and large high quality items make HangZhou EPT Hoisting Machinery Manufacturing Co., Ltd. the excellent option for you.

    wire rope electric hoist

    Decription:

    one.Kind CD1,MD1 wire-rope electric powered hoist is a type of little-lifting tools

    two.it can be mounted on one beam overhead crane ,gantry cranes, jib type CD

    3.electric hoist as only one particular standard pace which can fulfill normal software

    3.It is extensively employed in factories, mines, harbors, warehouses, cargo storage area and outlets

    four.primarily in elevating wor ept effectiveness and improving wor ept problems.

    electric powered hoist parameter:

    one.     Reducer

    Third-class useless axel helica equipment transmission structure is adopted, equipment and equipment axel are created of heat handled alloy steelcase and scenario go over with specific assembly and excellent seal are created of top quality forged iron.The reducer is independent, so its easy to load and unload it.

    2.    Manage Box

      It has unit with up an down stroke safety of split off limiter and can cut off main circuit in an emergency,which makes certain safe operation of electric block.Electrical factors are of extended provider existence and operational protection.

    3.       Steel Wire Rope

    It makes use of GB1102-seventy four(6*37+1) hoist steel wire rope which is sturdy in use.

    four.    Conical Motor

      The hoist motor employs conical motors of reasonably stronger starting up torque to brake asynchronous motor and does not require additional arrester. The motor s load duration aspect is twenty five% the motor uses B frade and F grade insulation and its grade of protection isIP44/IP54.

    five.    Button Swap

      Its hand-operated, effortless to manage,and has two modes of cord procedure and cordless distant management

    6. Hooks

    Load hooks are heat dealt with and fracture resistant. In circumstance of unsafe overloading mechanical torque-restricting gadgets depend on springs (with particular damaging charge attributes) that perform in unison with a torque transmission system of balls interfacing two indents. In this set up, preset torque is stored inside an acceptable environment tolerance and guarantees that even underneath hugely dynamic generate problems, the clutch disengages during overload.or abuse, the hook does not fracture but will slowly produce.

    seven. Energy

    Running voltage 220-440V, fifty/60Hz, 1-3 period.

    Lower voltage manage 36V is regular.

    High efficient power-preserving motor, asbestos free of charge brake technique. 2-speed motor accessible.
    Strong pole change motors with cylindrical rotors and built-in protection brakes.

    8. Restrict Switch

    Limit change units fitted at each top & bottom finishes, swap off electrical power instantly to avert load chain from running out.

    9. Pushbutton Swith

    Pushbutton swith is rain-proof plastic for serious affect and corrosive environment resistance and mechanically interlocked.

    10. Hoisting Equipment:

    Ligh tweight gear units with silent working flat bevelled gears supply the torque necessary.

    Type Loading potential Lifting peak Lifting pace Travelling velocity Power source
    Single pace Dual velocity
    Ton m m/min m/min V-HZ-Period
    CD1/MD1 .twenty five three~nine 8 0.8/8 twenty 220~440V-fifty/60HZ-3phase
    .5 six~12 20/30
    one 6~30
    2 six~thirty
    three six~30
    5 six~30
    10 nine~thirty 7 .7/seven
    sixteen nine~thirty three.five .35/3.five 18
      9~36 4.2 .forty two/4.two  
    20 9~24 3.three .33/3.3 14
    9~30 four.two .42/4.2
    32 nine~24 three .3/3 16
    Above parameter just for your reference,our hoist can be custom-made layout Max.80ton base on your calls for.

    Remember to do not wait to make contact with to us!
    Cell Telephone Variety/ 24hous hotline: 0086~13083988828 13858117778931230863 
    We sincerely hope to construct a cooperative and mutual advantageous company romantic relationship with you!

    Development Tools
    Electrical Hoist
    electrical winch
    winch
    Construction Machinery
    Lifting Products
    power winch
    Overhead Crane
    Wire Rope Hoist
    Development Equipment
    Gantry Crane
    Electrical Wire Rope Hoist
    Electrical Chain Hoist
    Development Hoist
     

    The use of authentic products manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our firm and the outlined alternative components contained herein are not sponsored, approved, or manufactured by the OEM.

      shop  made in China - replacement parts -  in Kananga Democratic Republic of the Congo  EPT Good Price 2ton 30meter Construction Machinery with top quality

      shop  made in China - replacement parts -  in Kananga Democratic Republic of the Congo  EPT Good Price 2ton 30meter Construction Machinery with top quality

      shop  made in China - replacement parts -  in Kananga Democratic Republic of the Congo  EPT Good Price 2ton 30meter Construction Machinery with top quality

    Construction supplier made in China – replacement parts – in Diwaniyah Iraq Machinery 90 Ton Mobile Truck Crane Qy90K with top quality

    Construction  supplier  made in China - replacement parts -  in Diwaniyah Iraq  Machinery 90 Ton Mobile Truck Crane Qy90K with top quality

    We – EPG Team the greatest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 diverse branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

    Building Machinery 90 ton cell truck crane QY90K with price

    1. Innovative jib technique
    2. Unique telescoping tech
    3. New hydraulic motor
     
    Functions of Truck Crane QY90k:

    (1)The revolutionary jib method adopts embedded block, plug-in growth head and octagon jib, which has exceptional lifting functionality and protected and reliable lifting function.
    (2)The distinctive extend and retract method avoids the bend of the core pipe and cylinder and the crack of the boom brought on by misoperation, strengthening the safety of the operations.
    (3)Eight patent methods make certain the smooth, higher performance and energy conservation of the lifting, rotation, and luffing programs.
    (4)The torque limiter adopts colorful Lcd exhibit, realizing the intelligence of the failure prognosis. The precision is forward of the market.
    (5)Adopt the new hydraulic motor with large torque starting up level, ma ept the secondary lifting safer.
    (6)The humanity layout tends to make the taxi and management taxi far more roomy, and effortless to run.
    (7)6 special producing technologies guarantee the higher quality.

    Major Technological Information for Lifting Procedure
     

    Dimension Device QY90K
    General duration mm 14700
    General width mm 2800
    All round top mm 3900
    Excess weight    
    Complete bodyweight in journey kg 53000
    Front axle load (axle 1, 2, 3) kg 9000/9000/13000
    Rear axle load (axle 4, 5) kg 13000/9000
    Electrical power    
    Engine design   TAD720VE
    OM457LAIII/nine
    Engine rated electrical power kW/(r/min) 174/2300 
    315/1900
    Engine rated torque N.m/(r/min) 845/1400
    2100/1100
    Vacation    
    Max. journey velocity km/h eighty
    Min. turning diameter m 23
    Min. ground clearance mm 315
    Strategy angle ° twenty
    Departure angle ° sixteen
    Max. grade potential % forty five
    Gas intake for 100km L sixty
    Main functionality    
    Max. rated whole lifting potential t ninety
    Min. rated wor ept radius m three
    Turning radius at turntable tail m four.fifty one
    Max. lifting torque kN.m 3234
    Base increase m 12.three
    Entirely prolonged increase m 55
    Totally prolonged growth+ jib m 71
    Longitudinal outrigger span m seven.five
    Lateral outrigger span m 7.one
    Wor ept pace    
    Growth luffing time s 75
    Growth entire eTorque limiters are mechanical and electromechanical power-transmission gadgets that safeguard machine sections (or workpieces they are servicing) from overloads, crashes, and hurt from jams.xtension time s 600
    Max. swing pace r/min ≥2
    Max. pace of major winch (single rope) (no load) m/min ≥120
    Max. pace of aux. winch (one rope) (no load) m/min ≥85

     

    The use of first tools manufacturer’s (OEM) component quantities or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our organization and the shown replacement areas contained herein are not sponsored, accredited, or manufactured by the OEM.

    Construction  supplier  made in China - replacement parts -  in Diwaniyah Iraq  Machinery 90 Ton Mobile Truck Crane Qy90K with top quality

    Construction  supplier  made in China - replacement parts -  in Diwaniyah Iraq  Machinery 90 Ton Mobile Truck Crane Qy90K with top quality

    Construction  supplier  made in China - replacement parts -  in Diwaniyah Iraq  Machinery 90 Ton Mobile Truck Crane Qy90K with top quality

    Construction supplier made in China – replacement parts – in Amman Jordan Machinery 70 Ton Telescopic Boom Truck Crane EPT t70e with top quality

    Construction  supplier  made in China - replacement parts -  in Amman Jordan  Machinery 70 Ton Tel: +86~13083988828escopic Boom Truck Crane EPT t70e with top quality

    We – EPG Team the greatest gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 distinct branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

    70 ton cellular truck crane QY70K-I

    The functions of Truck Crane QY70K-I:
    The progressive jib technique adopts embedded block, plug-in increase head and worldwide innovative U area jib, which has outstanding lifting performance and protected and dependable lifting work.
    8 patent tactics make certain the smooth, higher performance and strength conservation of the lifting, rotation, and luffing systems.
    The torque limiter adopts colorful Lcd show, acknowledging the intelligence of the failure diagnosis. The precision is in advance of the business.
    The humanity layout makes the taxi and handle taxi much more spacious, and simple to run.
    Six distinctive manufacturing systems ensure the large quality.
    The wor ept situation expands two times. Freshly include 5t counterweight.

    Dimension Unit QY70K-I
    General length mm 13930
    General width mm 2800
    General peak mm 3575
    Bodyweight    
    Whole bodyweight in vacation kg 43000(without having 1t vice counterweight)
    Entrance axle load kg 17000
    Rear axle load kg 26000
    Energy    
    Engine product    WD615.338(domestic III)
    Motor rated electricity kW/(r/min)  276/2200
    Engine rated torque N.m/(r/min) 1500/1400 
    Vacation    
    Max. vacation speed km/h 80
    Min. turning diameter m 24
    Min. ground clearance mm 327
    Strategy angle ° 19
    Departure angle ° 13
    Max. quality capacity % 40
    Fuel consumption for 100km L 45
    Main efficiency    
    Max. rated complete lifting capacity t 70
    Min. rated wor ept radius m 3000
    Turning radius at turntable tail m three.fifty five
    Max. lifting torque kN.m 2303
    Foundation increase m 11.6
    Fully prolonged boom m 44.5
    Fully extended boom+ jib m 59.5
    Longitudinal outrigger span m 6.one
    Lateral outrigger span m seven.three
    Wor ept speed    
    Growth luffing time s sixty
    Growth entire extension time s  ≤150
    Max. swing speed r/min  ≥2.
    Max. velocity of major winch (one rope) (no load) m/min  ≥130
    Max. pace of aux. winch (single rope) (no load) m/min ≥108

     

    The use of first products manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference needs Centric Overload clutches supply device defense and lowered repair time during jamming load situations. Mechanical or Pneumatic torque limiters give consistent torque ranges after many overloads. In contrast to friction type or shear pin variety torque limiters, Centric clutches can provide an exact strategy of resetting the torque with no operator intervention. A single situation clutch will reengage in the specific rotational place each time. This is frequently needed for method timing in bottling, packaging, and paper converting kind apps.only and for indicating merchandise use and compatibility. Our company and the shown substitute elements contained herein are not sponsored, accredited, or created by the OEM.

    Construction  supplier  made in China - replacement parts -  in Amman Jordan  Machinery 70 Ton Tel: +86~13083988828escopic Boom Truck Crane EPT t70e with top quality

    Construction  supplier  made in China - replacement parts -  in Amman Jordan  Machinery 70 Ton Tel: +86~13083988828escopic Boom Truck Crane EPT t70e with top quality

    Construction  supplier  made in China - replacement parts -  in Amman Jordan  Machinery 70 Ton Tel: +86~13083988828escopic Boom Truck Crane EPT t70e with top quality