Mixing price made in China – replacement parts – in Tomsk Russian Federation Equipment for Metallic Powder Coatings with top quality

Mixing  price  made in China - replacement parts -  in Tomsk Russian Federation  Equipment for Metallic Powder Coatings with top quality

We – EPG Group the most significant gearbox & motors , torque limiter couplings and gears factory in China with 5 different branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

one. Mixers:

one.1 Computerized Container Mixer

Automatic container mixer is wor ept with ongoing content trolleys, the container fills the components and lifted up and connnected tightly with mixing head immediately. The mixing head tilts with each other with the containers, and then receive the homogeneous mixing end result, after ending mixing as per setting time, and return to unique position, the whole procedure will be managed by PLC

Primary Features:

Many removable containers for circular operation
Substantial effectiveness
Adopting PLC to realize automation
Homogenized combination
No curing granule
Convenient for cleansing and routine maintenance
Secure and relaiable operation

Complex Information:

Model Volume (L) Output (kg/tank) Mixing Motor (kw) Tilting Motor (kw) Crushing Motor (kw) Mixing Time (min) Handle Method Overall Dimensions (MM)
FHJ-fifteen 15 eight one.5     5-10 PLC  750*480*950
FHJ-a hundred and twenty 120 60 5.five .2   5-ten PLC  1800*1800*1950
FHJ-150  one hundred fifty 70 5.5 .37 2.two five-ten PLC  2150*1100*2300 
FHJ-three hundred 300 a hundred and fifty 15 3 2.two 5-10 PLC  2150*1100*2300 
FHJ-600  600 300 22 4 four five-ten PLC  2650*1250*2700 
FHJ-1000 a thousand 500 thirty four 4 5-ten PLC  2900*1550*3100 
FHJ-2000  2000 1000 forty five five.five 5.5 five-ten PLC  3500*2350*3650 

1.2 High Pace Pre-Mixer:


Higher efficiency & simple procedure

Effortless colour altering, risk-free cleaning

Blended mixing & crushing as a single

Mixing time preseting, quick & homogeneous

Superb sealing, powder lea ept free

Vertical or horizontal variety as optional

Technological Info:

Product Quantity (L) Mixing Motor (kw) Crushing Motor (kw) Mixing Time (min) General Dimensions (mm)
GHJ-20 20 .55 .37 3-five seven hundred*500*800
GHJ-100 100 3 1.five 3-5 a thousand*600*900
GHJ-two hundred two hundred 5.five 3 three-5 1500*900*1400
GHJ-three hundred 300 seven.5 4 three-6 1800*900*1400
GHJ-five hundred 500 fifteen 5.5 four-6 1800*1300*1800
GHJ-800 800 18.five seven.5 four-6 1900*1300*2000
GHJ-one thousand a thousand 22 7.five 4-six 2300*1400*2000

1.3 Double Cone Mixer:

This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This equipment is relevant for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound supplies. It has outstanding effect in mixing powders and particles with reasonably great fluidity. Its barrel is made of stainless metal, which is polished equally inside and outdoors, featuring lovely appearance and easy procedure.

Technological Data:

Model Quantity (L) Output (kg/tank) Rotating Motor (kw) Mixing Motor (kw) Mixing Time (min) Overall Proportions (mm)
SXH-one hundred three hundred one hundred fifty 1.five 1.five -30 1760*830*2030
SXH-200 400 two hundred 1.five 1.five -thirty 1830*830*2150
SXH-three hundred 600 300 two.2 one.5 -thirty 1980*1000*2275
SXH-five hundred one thousand five hundred 4 four 1-30 2630*1140*2620
SXH-one thousand 2000 one thousand five.five five.5 -30 3060*1440*2860
SXH-1500 3000 1500 7.5 seven.5 -thirty 3700*2000*2970
SXH-2000 4000 2000 eight.five eight.five -30 3800*2500*3500

2. Twin-Screw Extruder

2.1 Higher torque & High Speed Rotation Twin-Screw Extruder:

Principal Characteristics:

*Total Gearbox from skilled EPT maker, lower sounds, sturdy longevity

*Substantial screw speed, higher shearing, fast discharge

*Independent lube oil cooling system design

*Torque limiter to protect the push train

*Suitable for reclaim powder, specific powder production

*Break up layout of barrel and liner inserts for easy cleansing and maintainence

*Prime & Aspect feeding possibilities

*Other functions exact same as conventional kind extruder

Complex Parameters:

Model Capability (kg/h) Screw Diameter (mm) Screw Size (mm) Screw Speed (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Energy (kw) Total Proportions (mm)
TSX-forty eighty-260 forty 16D -800 eleven/15/eighteen.5 .fifty five eight 1850*700*1750
TSX-52 a hundred and fifty-450 fifty two 16D -800 22/thirty/37 .seventy five 10 2700*900*2200
TSX-sixty five 400-1000 65 16D -800 45/55/seventy five one.1 12 2900*1000*2400
TSX-75 800-1200 75 16D -800 75/90 1.five sixteen 3100*1200*2500
TSX-85 1200-1800 85 16D -800 ninety/a hundred and ten 2.2 20 3700*1500*2900

2.2 Typical Sort Co-Rotation Parallel Twin Screw Extruder


*Sturdy shearing, easy cleaning

*Accurate auto temperature control, high cooling & heating exchagne

*Hinged clamshell variety barrel opening, segmented liners for effortless changing and cost conserving

*Feeder simple assembly & disassembly, internal composition to keep away from agglomeration

*Configurable screw applied for defferent powder formulation

*Screw and barrel undertake special components like Cr12MoV, CPM, etc., large donning resisting

*Fairly gearbox with reduced noise dB amount

*Torque limiter to safeguard the generate practice

*Minimal energy intake

Specialized Parameters:

Design Ability (kg/h) Screw Diameter (mm) Screw Size Screw Pace (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Power (kw) All round Proportions (mm)
SLJ-40 eighty-220 forty 16D -five hundred eleven/15/eighteen.5 .55 4 1800*600*1700
SLJ-fifty one hundred fifty-three hundred 50 16D -five hundred 22/thirty .seventy five 8 2600*seven-hundred*2000
SLJ-55 three hundred-four hundred fifty five 16D -500 30/37 .seventy five 8 2700*900*2300
SLJ-60 four hundred-600 60 16D -five hundred 45 1.1 twelve 2750*1000*2350
SLJ-seventy five 600-800 seventy five 16D -500 fifty five one.5 twelve 2900*1100*2400
SLJ-eighty 800-1200 80 16D -five hundred 75/ninety two.two 20 3700*800*2800

two.3 Lab Variety Extruder

Technological Parameters:

Model Ability (kg/h) Screw Diameter (mm) Screw Duration Screw Pace (r/min) Main Motor (kw) Feeder Motor (kw) Heating Energy (kw) All round Dimensions (mm)
TSX-20 .2-10 22 16D -600 2.2-four .1 2 1600*three hundred*850
SLJ-thirty one-30 30 16D -500 three-5.5 .eighteen three.2 1430*550*1300
SLJ-32 forty-80 32 16D -500 7.5/eleven .25 3.2 1600*five hundred*1500

three Cooling Belt

3.1 Water Cooled Cooling Belt with Flaker:


Consistent good quality imported steel belt

Bottom cooling h2o spraying program, mounted heating and cooling gadget

Geared up with manual system to keep away from deforming

Better cooling result, greater effective efficiency

Couple of routine maintenance and simple cleansing

Chips thickness and roller velocity adjustable

Crusher with finger pin and tooth kind

Minimized cross contamination, easy procedure

Technological Parameters:

Model Roller Dia. (mm) Belt Width (mm) Belt Duration (mm) Push Motor (kw) Capability (kg/h) Cooling Method Total Proportions (mm)
GDY-406 220 600 4000 1.5 two hundred-400 Cooled Water 4000*750*1600
GDY-508 325 800 5000 three four hundred-five hundred Cooled Water 5000*900*1800
GDY-510 325 a thousand 5000 3 five hundred-700 Cooled H2o 5000*1100*1900
GDY-610 440 1000 6000 four 600-800 Cooled H2o 6000*1100*1900
GDY-612 440 1200 6000 four seven hundred-900 Cooled Water 6000*1400*1900
GDY-712 600 one thousand 7000 5.five 900-1200 Cooled Drinking water 7000*1400*2000

3.2 Air Cooled Kind Caterpillar Cooling Belt with Flaker:


Stainless metal made caterpillar, air cooling

Flake chips thichness and conveying velocity adjustable

Affordable layout for cooling rollers within, specialist area treatment method to steer clear of h2o lea ept and rust

Installed with simplified air conditioning system

Risk-free operation, like emergency button, clockwise and counter-clockwise rotation.

Specialized Parameters:

Model Roller Dia. (mm) Belt Width (mm) Belt Length (mm)  Travel Motor (kw) Blower Motor (kw) Potential (kg/h) Cooling Method General Proportions (mm)
JFY-204  one hundred sixty/one hundred sixty four hundred 2000 .fifty five 200-four hundred thirty-100 Chilled Water&Air 2000*450*900
JFY-406 one hundred sixty/220 600 4000 .seventy five 400-five hundred one hundred-220 Chilled H2o&Air 4000*850*950
JFY-508 one hundred eighty/325 seven-hundred 5000 .seventy five 500-seven hundred 220-400 Chilled H2o&Air 5000*1050*1200
JFY-510 one hundred eighty/325 800 5000 1.one 600-800 four hundred-five hundred Chilled H2o&Air 5000*1150*1200
JFY-610 one hundred eighty/325 800 6000 one.one seven-hundred-900 five hundred-700 Chilled Water&Air 6000*1150*1200
JFY-710 180/325 1000 6000 1.five 900-1200 600-900 Chilled Drinking water&Air 7000*1250*1450
JFY-812 a hundred and eighty/325 one thousand 7000 two.2 900-1200 900-1200 Chilled Drinking water&Air 8000*1650*1600

3.3 PU Variety Air Cooled Cooling Belt


Adjustable thichness and roller speed

Air cooled to avoid cross contamination

Roller and crusher geared up with overload defense

Large efficiencies

1 piece PU belt to faciliate simple cleansing and upkeep

Compact layout for minimal area

Technological Parameters:

Product Roll Dia. (mm) Band Width (mm) Band Length (mm) Motor Electricity (kw) Throughput (kg/h) Proportions (mm)
PFY-104 156 four hundred one thousand 1.1 fifty 1000*870*1050
PFY-206 220 600 2000 1.one a hundred and fifty 2000*1150*1100
PFY-208 445 800 2000 two.2 300 2000*1100*1100
PFY-210 445 a thousand 2000 two.2 500 2000*1300*1100
PFY-310 622 one thousand 3000 two.two 800 2000*1300*1200

4 ACM (Air Classifier Mill) Grinding System


Protection in accordance with EU explosion resistant standard ATEX/PSR11

Lower noise style (from mill to admirer program)

Particle size distribution adjustable on request

Mill bodyStandard Torq-Tenders are bidirectional. Torque benefit continues to be the very same irrespective of rotation. If specified, the torque limiter can be configured at the manufacturing unit to release at various torque rankings for different rotational directions. When utilized as a coupling, the Torq-Tender fulfills two functions: 1) A versatile shaft coupling 2) a mechanical torque limiter. temperature and air intake volume monitoring

Rotary sieve with unique design and resilient for mesh use situation

Complete grinding system developed for powder dust cost-free

Finished powder products with a lot more than ninety eight percent

Large output, simple operation cleansing and routine maintenance

Technical Parameters:

Product Mill Motor kw Rotor rpm Classifier Motor Classifier rpm Fan kw Air cbm/h Capacity kg/h General dimensions mm
ACM-02 two.two 12000 .37 -3000 three 350 2-30 1430*550*1300
ACM-05 four 11000 .75 -3000 four 800 thirty-80 2100*a thousand*2150
ACM-10 seven.5 7000 one.five -3000 eleven 2500 a hundred-260 6200*1250*3200
ACM-fifteen 11 7000 one.5 -3000 fifteen 3000 two hundred-350 6500*1300*3300
ACM-20 fifteen 6600 2.2 -3000 22 3500 300-400 7500*1300*3600
ACM-thirty 22 5500 three -3000 thirty 4500 400-550 7900*1500*3600
ACM-forty 30 4600 5.5 -3000 37 5500 600-800 8000*1700*3600
ACM-fifty 37 4000 7.five -3000 45 6500 a thousand-1200 9000*1900*3900
ACM-60 forty five 3500 7.five -3000 fifty five 8000 1200-1600 9000*2000*4000


Xihu (West Lake) Dis.sunshine is a foremost company in China of Powder Coating Creation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit thirty several years of encounters in this ept and have exported to virtually 30 nations and locations in the past ten years, and win widely very good reputations.

We handed CE certification approval and ATEX explosion resistant examination, and so on. intercontinental specifications, we do know how to fulfill the diversified and personalized produced requests of our consumers.

Our everlasting company philosophy: consistant high quality, effective interaction, liable services.

The use of unique tools manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our organization and the shown replacement components contained herein are not sponsored, accepted, or made by the OEM.

Mixing  price  made in China - replacement parts -  in Tomsk Russian Federation  Equipment for Metallic Powder Coatings with top quality

Mixing  price  made in China - replacement parts -  in Tomsk Russian Federation  Equipment for Metallic Powder Coatings with top quality

Mixing  price  made in China - replacement parts -  in Tomsk Russian Federation  Equipment for Metallic Powder Coatings with top quality