China Hoist Overload Indicator and Sensor with Overload Limiter System andante torque limiter

Product Description

Solution Description
WTZ A100N Overload limiter can be in the sort of Chinese characters, graphics, people and so on complete exhibit the numerous parameters in the approach of work. 
As the principal hook load, vice hook load, work growth Angle, size of growth, radius, etc. 

Overload  Limiter  Alarm function 
Have seem and light alarm purpose: when the crane boom work amplitude restrict near to perform, when lifting load and torque unit shut to the permitted load limit, torque system issued a warning of sluggish beeping seem. Warning lights flashing slowly and gradually torque program. 
When jib body perform scope to perform restrict, when the lifting load and torque reaches tools when the permitted load limit moment deliver urgent alarm beeping sound. Shortness of torque system alarm indicating pink light-weight flashing.

Overload Limiter safety function 
Manage output perform: when increase amplitude restrict near to perform, perform when lifting load and torque device close to the permitted load restrict, the technique output torque handle signal to quit the crane proceed to proceed to run in the direction of chance, allow crane moves in the course of stability. 

    Load Instant Indicator(safe load indicator or Crane personal computer) is a system which is installed on a variety of types of cranes like cellular, crawler, tower, gantry, portal, marine and offshore crane. It warn the operator if the carry is exceeding the risk-free running range. In some situations, the unit will physically lock out the machinery in circumstances it decides to be unsafe. 

    It controls the lifting tools to perform as for every the manufacturer’s suggested protected load charts. Every single of the measured parameters like load weight, operating radius, manage restrict,angle and extension of the crane boom, and so on will then more be exhibited in the operator’s cabin.

     WTZ-A100N Overload  Limiter ( LMI ) System

    Technical Parameters

     

    Info LOGGER

    Data USB downloadable: created-in USB interface, can assist operating information download, can assessment the historical info from any time interval. Via the investigation of the report, the comprehensive standing of web site procedure can be restored. Ultra-large Capability: the device can support true load information 50,000 round logging, greater capability than the common 16000 document.

    Knowledge Document Picture

    Installation Circumstances

     

    Certifications

    Company Information

    Weite Technologies Co.,Ltd

    Founded in 2002, it is countrywide hello-tech organization found in HangZhou, China. It has been concentrating on R&D and OEM manufacturing of lifting safety safety gadgets these kinds of as Load Minute Indicator, Risk-free monitoring systems, overload limiter, Load cell, Anemometers and many others.We continuously concentrate on ensuring lifting equipments operate properly as extended-time period pursuing aim. 

    “The trusted Protection Associate for World-wide Leading one hundred Crane Owning Businesses like Tat Hong, Asiagroup, Massive Crane and Fortune 500 corps” . These days, WTAU goods are widely used in marine sector,electrical, chemical, steel, metallurgy, construction, ports and other industries, and have been extensive spreaded to above 30 international locations and areas.

    World-wide Associates

     

    FAQ

    1) Is your organization nicely-reputated? How to demonstrate that?

    It is a China Best 3 manufacturer focusing on Crane Basic safety Safety Gear. We are also Safety Associates for International Leading a hundred Crane Possessing Organizations like Tat Hong(leading 9), Asiagroup(top 45), Big Crane(leading ninety four) and Best five hundred firms such as ABB, Macgragor,TTS,CNOOC,and so on. Merchandise are been offered to above 30 international locations and areas globally. 
     

    2) How to assure the quality?

    The Item Guarantee for the whole merchandise is twelve months. Any problem after set up, we will change the new 1 for cost-free.

     

    3) How to set up the LMI?

    English User Handbook(contain all the information of every merchandise) will be offered for set up and difficulties taking pictures(refer to the pic below). Also free of charge Distant Instantaneous Technological help would be presented by our english engineers. Or we can ship our engineers to aid you locally.

     

    4) How a lot is your LMI technique?

    Deliver me the crane design, hook number, working conditions(Luffing Tower Operating Problem, Pilling) and particular need and the like. Your contact info is a must.

     

    five) How can I place get? 
    A: You can make contact with us by e mail about your get details, or spot order on line.

     

    six) How can I shell out you?

    A: After you affirm our PI, we will request you to spend. T/T and Paypal, Western Union are the most common approaches we are using. 

    Connected Merchandise

     

    US $1,990
    / Piece
    |
    1 Piece

    (Min. Order)

    ###

    After-sales Service: Spare Parts
    Warranty: 1 Year
    Type: Gantry Crane & Portal Crane
    Application: Hoisting Machinery
    Certification: CE, ISO9001: 2000, ISO: 9001, CE
    Condition: New

    ###

    Customization:
    US $1,990
    / Piece
    |
    1 Piece

    (Min. Order)

    ###

    After-sales Service: Spare Parts
    Warranty: 1 Year
    Type: Gantry Crane & Portal Crane
    Application: Hoisting Machinery
    Certification: CE, ISO9001: 2000, ISO: 9001, CE
    Condition: New

    ###

    Customization:

    CZPT(R) Tolerance Ring For Limiter Torque

    Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.limiter torque

    CZPT(r) Tolerance Ring

    CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
    The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
    The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
    The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
    The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak.limiter torque

    CZPT TL

    TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
    The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
    The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
    The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
    TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive.limiter torque

    IWIS FT series

    FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.

    TL-IT inline

    TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
    The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.
    China Hoist Overload Indicator and Sensor with Overload Limiter System     andante torque limiterChina Hoist Overload Indicator and Sensor with Overload Limiter System     andante torque limiter
    editor by czh 2022-12-17