China 50t Jib Crane & Floating Crane Use Overload Limiter Wtz A700 Security System with Great quality

Solution Description

Item Description
WTZ A700 Overload limiter can be in the kind of Chinese figures, graphics, characters and so on thorough screen the numerous parameters in the procedure of operate. 
As the principal hook load, vice hook load, work growth Angle, duration of increase, radius, and so on. 

Overload Limiter Alarm function 

Have seem and mild alarm function: when the crane increase work amplitude restrict near to function, when lifting load and torque device near to the permitted load restrict, torque system issued a warning of slow beeping audio. Warning lights flashing slowly and gradually torque technique. 
When jib frame work scope to operate limit, when the lifting load and torque reaches gear when the permitted load limit minute deliver urgent alarm beeping seem. Shortness of torque program alarm indicating crimson light flashing.

Overload Limiter protection function 
Handle output perform: when growth amplitude restrict near to work, function when lifting load and torque unit near to the permitted load restrict, the method output torque handle signal to stop the crane continue to carry on to run in the route of danger, let crane moves in the direction of safety. 

WTZ  A700 Load Instant Indicator(protected load indicator or Crane personal computer) is a gadget which is mounted on a variety of types of cranes like cellular, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the carry is exceeding the safe running assortment. In some cases, the system will bodily lock out the equipment in circumstances it determines to be unsafe. 

It controls the lifting equipment to perform as for each the manufacturer’s proposed risk-free load charts. Each and every of the calculated parameters like load excess weight, functioning radius, management limit,angle and extension of the crane increase, and many others will then even more be exhibited in the operator’s cabin.

 

WTZ A700 overload limiter program for terminal quayside crane 

WTZ-A700 Safe  Load Indicator technique( LMI ) 

one.WTZ A700 show/check (8inch colour contact Liquid crystal display display screen ,have to)
two.Information control  box(should)
three.Pin  type  Lod cell(need to)
4.Wind speed  senosr(optional)
five.Encorder(optional)
six.Other  spare  elements…

 

Complex Parameters
 

Model: WTL-A700 Control Output: <= 5 Channels
Screen:8 inch Liquid crystal display Method Composition Mistake: ±5%(F.S.)
Operating Temperature: -20ºC~60ºC Power Comsumption:<35W
Running Humidity: 95%RH(25ºC) Alarm Volume: >60db
Fat Measurement Range: 0T~999.9T IP Quality: IP sixty four
Resolving Potential: .1T Power Provide: AC220V±10%
Singal Enter: <= 6 Channels Application:terminal container  crane&portal  crane

Installation Cases 

Certifications

Organization Info

Weite Systems Co.,Ltd

Established in 2002, it is nationwide hi-tech enterprise positioned in HangZhou, China. It has been concentrating on R&D and OEM manufacturing of lifting security security gadgets these kinds of as Load Minute Indicator, Protected monitoring systems, overload limiter, Load cell, Anemometers and so forth.We continuously focus on making certain lifting equipments operate properly as long-time period pursuing purpose. 

“The trustworthy Security Associate for International Best a hundred Crane Possessing Organizations like Tat Hong, Asiagroup, Big Crane and Fortune 500 corps” . Nowadays, WTAU products are broadly used in marine business,electrical, chemical, steel, metallurgy, development, ports and other industries, and have been wide spreaded to more than 60 countries and areas.

Worldwide Partners

FAQ

one) Is your business nicely-reputated? How to demonstrate that?

It is a China Prime 3 brand name concentrating on Crane Basic safety Safety Products. We are also Safety Partners for Global Best a hundred Crane Possessing Companies like Tat Hong, Asiagroup, Massive Crane and Fortune five hundred corps” . Presently, WTAU items are commonly used in marine sector,electrical, chemical, metal, metallurgy, construction, ports and other industries, and have been broad spreaded to more than 60 countries and regions.
 

2) How to guarantee the top quality?

The Merchandise Guarantee for the overall merchandise is 12 months. Any issue after installation, we will adjust the new 1 for free of charge.

 

3) How to put in the LMI?

English User Manual(incorporate all the specifics of every single product) will be offered for set up and trouble shooting(refer to the pic under). Also cost-free Remote Instantaneous Technical help would be supplied by our english engineers. Or we can deliver our engineers to assist you domestically.

 

four) How much is your LMI technique?

Send out me the crane model, hook amount, doing work problems(Luffing Tower Functioning Issue, Pilling) and specific necessity and the like. Your make contact with data is a need to.

 

5) How can I place get? 
A: You can make contact with us by e-mail about your get information, or location purchase on line.

 

6) How can I pay you?

A: Soon after you verify our PI, we will ask for you to pay out. T/T and Paypal, Western Union are the most usual ways we are employing. 

Associated Merchandise

 

US $4,990
/ Piece
|
1 Piece

(Min. Order)

###

Task: Adjust
Structure: Combination
Mathematical Model: Linear
Signal: Continuous
Function: Automatic Control, Protection, Monitoring, Measurement, Alarming
Certification: ISO: 9001, CE

###

Customization:

###

Model: WTL-A700 Control Output: <= 5 Channels
Display:8 inch LCD System Composition Error: ±5%(F.S.)
Working Temperature: -20ºC~60ºC Power Comsumption:<35W
Operating Humidity: 95%RH(25ºC) Alarm Volume: >60db
Weight Measurement Range: 0T~999.9T IP Grade: IP 64
Resolving Ability: 0.1T Power Supply: AC220V±10%
Singal Input: <= 6 Channels Application:terminal container  crane&portal  crane
US $4,990
/ Piece
|
1 Piece

(Min. Order)

###

Task: Adjust
Structure: Combination
Mathematical Model: Linear
Signal: Continuous
Function: Automatic Control, Protection, Monitoring, Measurement, Alarming
Certification: ISO: 9001, CE

###

Customization:

###

Model: WTL-A700 Control Output: <= 5 Channels
Display:8 inch LCD System Composition Error: ±5%(F.S.)
Working Temperature: -20ºC~60ºC Power Comsumption:<35W
Operating Humidity: 95%RH(25ºC) Alarm Volume: >60db
Weight Measurement Range: 0T~999.9T IP Grade: IP 64
Resolving Ability: 0.1T Power Supply: AC220V±10%
Singal Input: <= 6 Channels Application:terminal container  crane&portal  crane

The Benefits of Using a Torque Limiter

Using a torque limiter can be very beneficial, as it can save a lot of energy in the long run. It can also be used to protect a piece of equipment from damage, as it will protect the item from being overloaded. This is an important factor in many industries, and can save a lot of money.limiter torque

Placement of a torque limiter

Typically, a torque limiter is located at the output of an electric motor, a gearbox, or other rotating mechanism. It is used to limit torque to a preset level. The torque limiter protects the motor or gearbox from overload and jamming. Torque limiters are used in industrial robots, conveyors, and sheet metal processing equipment. Using a torque limiter can save you money and protect your machinery from damage.
Torque limiters are available in various sizes and can be used in practically any application. The most important criterion for choosing a torque limiter is drive torque. It is important to place the torque limiter near the drive train to ensure maximum protection. The torque limiter must be larger than the output shaft of the motor.
Ball detent torque limiters are a popular type of limiter. These limiters use balls or rollers in sockets to decouple the drive and driven elements. When the torque exceeds a preset level, the balls slide out of the sockets.
Torque limiters come in various forms, including mechanical, pneumatic, and magnetic. These limiters can be used in any environment and provide advantages in certain niche applications. These limiters are easy to install and replace. They can also be adjusted to provide the desired slipping torque.
Friction torque limiters are a simple, low-cost method of protecting the higher cost components of a machine. They operate similarly to automotive brakes, using hardened balls or rollers in sockets to decouple drive and driven elements.
Ball detent limiters are usually adjustable through a rotating collar. The balls or rollers try to engage the next set of detents when the torque exceeds the preset level. A ball detent limiter can also have a snap acting spring.
Torque limiters can also be packaged as shaft couplings. This allows for the limiter to be placed between a gearbox and the motor, preventing overload and jamming.
Electronic torque limiters are also available. These limiters can be adjusted to the torque required for a particular machine cycle. This feature is especially useful in applications where linear load increases at a slow rate. A torque limiter may also have a trip indicator.limiter torque

Magnetic torque limiters

Using magnetic torque limiters can improve the performance of your equipment. It can prevent the risk of catastrophic failure, which can lead to extensive repairs. It can also be a cost-effective way to prevent damage.
There are two different types of magnetic torque limiters. One is the synchronous magnetic torque limiter, which uses permanent magnets mounted on each shaft. The other is the aeronautical magnetic torque limiter, which is designed to operate in line with a mechanical gearbox.
Torque limiters are typically used in sheet metal processing, printing and converting equipment, and robotics. They can also be used on conveyors and in other automated applications. These devices are commonly made of heat treated steel.
Magnetic torque limiters can be used in a wide range of temperatures. Compared to friction torque limiters, they don’t wear out as quickly and are less prone to fatigue. They also have quick response times. They don’t require lubrication. They are also easy to maintain. The parts are sealed with thread locking adhesive. They also require less clearance, which prevents wear.
Torque limiters are also known as overload safety devices. These devices prevent unnecessary downtime by disconnecting a motor from a driven system when a torque load reaches a specified limit. They can also prevent workplace accidents. They are typically used in conveyors, woodworking machines, and industrial robots.
Magnetic torque limiters are typically more expensive than friction torque limiters. They are also not as easy to integrate into a system as friction limiters. They are also not suited for applications with high torque demands. The magnetic torque limiter has a greater backlash than the friction type. However, they can be used in a variety of applications, and they don’t require continuous maintenance. They also offer a degree of torsional elasticity.
The aeronautical magnetic torque limiter is designed to withstand up to 200 overload events. Its design has been tested to operate at a temperature range from -50 degC to +90 degC. It has been shown to work correctly throughout the range.
It is important to place torque limiters in the right location. They should be placed between expensive mechanisms. They also should be positioned to prevent tripping.

Friction torque limiters

Often considered an old technology, friction torque limiters have a lot to offer. They are low cost, simple mechanical devices that can prevent damage from overloads. A proper understanding of these devices can help you select the one that is right for your needs.
Friction torque limiters work by removing rotational energy from the drive train. They are typically used in industrial and agricultural machinery, as well as in textile processing and assembly lines. The units are available in several different sizes and formats.
Torque limiters are available as ball detent units, shaft-to-shaft couplings, and even friction units. They operate similarly to automotive brakes. However, they are much more predictable than their cousins. The amount of torque transmitted by the unit can be adjusted with a hand-operated knob. They can also be combined with other drive components to provide additional flexibility.
These units are typically made of black phosphated steel. They feature a flanged or threaded hub and two friction rings. They are available in various sizes and come in simplex, duplex, and triplex versions. The hub can be mounted on a pulley or sheave.
Depending on the application, friction torque limiters may be used in both directions of torque transmission. They can be paired with flexible coupling to accommodate small angular misalignments. Some systems are available in a single position, while others offer a random reset device.
When a torque overload occurs, the torque limiter slips until the overload is overcome. The unit also acts as a clutch, allowing the output side to stop rotating until the overload is resolved.
The design of friction torque limiters allows for a wide range of torques. Depending on the application, the units can operate at high speeds. However, they are not recommended for applications that use high speeds because they can heat up, overheat, and produce unwanted wear.
For applications that require higher torques, it is a good idea to use a torque sensing device. This allows the operator to adjust the settings to prevent overloads. It is also useful in applications where torques are varying due to temperature or humidity.limiter torque

Over-torque limiters

Various mechanical overload devices are used to prevent damage from accumulated rotational energy. Some are also called slip clutches. They disconnect a drive from a driven component when the load exceeds a pre-determined torque threshold.
Mechanical overload devices are often used in applications that require high torque levels. For example, windmill test stands and industrial crushers require operation at torque levels greater than 10 KNm. They are also used in gas turbines. Some are designed for industrial gearboxes and stepper motors. They are also used in marine applications.
Mechanical overload devices are available in various designs, including pawl-detent, ball-detent, and friction. These devices are adapted for various applications, including high-speed operation, light weight, and high accuracy.
Ball-detent torque limiters work by transmitting force through hardened balls. These limiters have been used for hundreds of years, but are more sophisticated now. They can be configured with multiple detent positions, and may also include a compression adjustment. They may require a manual reset after an overload.
Other mechanical overload devices include friction and hydraulic torque limiters. The friction type works by generating torque between contact surfaces. These devices may also employ friction plates. The hydraulic type applies hydraulic pressure between free spinning surfaces. They may also employ shear ring or shear tube designs.
Mechanical overload devices can disengage a drive line from a driven component within a few milliseconds after an overload occurs. These devices can also adjust the torque limit by using a single screw. These devices may also include proximity sensors to detect the source of a jam.
A torque limiter may also be implicated in no-start conditions. These systems may emit a noise on start up, but should not be accompanied by squealing or rattling. If a torque limiter is malfunctioning, it may be damaged or incorrectly installed. This will lead to unplanned downtime and increased maintenance costs.
Torque limiters may also be used to prevent collisions between production machines. These devices can disengage a drive from a driven component when it encounters a collision. Some designs may also incorporate safety couplings. This will reduce the risk of damage to the drive or the workpieces.
China 50t Jib Crane & Floating Crane Use Overload Limiter Wtz A700 Security System     with Great quality China 50t Jib Crane & Floating Crane Use Overload Limiter Wtz A700 Security System     with Great quality
editor by czh 2022-12-29